TOP
Menu
Home > Tension Meter > Stationary, electronic > Single Sensors 3 Rollers > FS Series > Tension Sensor FSH

Tension Sensor FSH

7 Tension ranges available
from 0 - 1000 cN up to 0 - 100.00 daN

Stationary electronic tension sensor for flexible material as wires, thin ropes and cables up to 15 mm Ø, as well as linear, flat material up to 10 mm width

Large, hardened guide rollers for minimized material deflection

Low cost tension sensor for quick and easy mounting

Categories: , , , , , , ,
Print page Print page

Special Features


Tension sensor FSH with integrated measuring amplifier and high accuracy of 1.5 % FS

Ball-bearing mounted guide rollers,
– V-grooved (for material with max. 4 mm Ø)
– U-grooved (for material with 3 up to 15 mm Ø)
– tape grooved (for material with max. width of 10 mm)

Various output signals are available:
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– digital (optional): USB, RS-232, Wi-Fi, RS-422 – see model FSH-422
– current: 4 – 20 mA (optional)

Easy installation, even afterwards, on existing machines

2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out 38.5 – 40 mm Ø) – see picture above.
The housing of sensors with digital output are larger and need as mounting cut a long hole R 19 with a length of 54 mm

Easy calibration to customized material by operator – zero and gain calibration is required

Measuring principle – load cell with high quality strain gauge bridge

Tension sensor with mechanical overload protection

Note: a wide range of custom designed models as well modifications are available on request. Please contact us with your demand!

Standard Features


Tension sensor FSH with aluminium housing

Required power supply +15…24 V DC (regulated)

Certificate of Compliance with the order 2.1 according EN 10204 is included

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Lern more about the different tension measuring systems

You are not sure, which system is right for, or where the differences are? Here we explain it for you.

Info tension measuring systems

Available Models

ModelTension Range
Measuring Head Width*
SCHMIDT Calibration Material**
FSH-10000 – 1000 cN150 mmPA: 0.30 mm Ø
FSH-20000 – 2000 cN150 mmPA: 0.50 mm Ø
FSH-50000 – 5000 cN200 mmPA: 0.80 mm Ø
FSH-10K0 – 10 daN200 mmPA: 1.00 mm Ø
FSH-20K0 – 20 daN250 mmPA: 1.50 mm Ø
FSH-50K0 – 50 daN250 mmsteel rope 1.50 mm Ø (7x7x0.20)
FSH-100K0 – 100 daN250 mmsteel rope 3.00 mm Ø (6x7x0.30)
Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g or kg.
* Outer distance between outside guide rollers or outside dimensions of front plate
** Suitable for 95 % of applications PA = Polyamide Monofilament

 

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

Anzeige SC-PM und Vorverstärker SCV-1For the tension sensor FSH we offer different display units for one or more sensors, as well as strain gauge amplifier.

Find further information at display units and amplifier

Zugspannungssensor FS1Tension sensor FSH can be reconverted for special applications.

Find further information at special design

Specifications

Calibration:According to SCHMIDT factory procedure
Accuracy:±1.5 % full scale and ±1 digit % full scale or better
Other calibration material ±3 % full scale or better
Overload protection:100 % of tension range
Measuring principle:Strain gauge bridge
Measuring roller deflection:Max. 0.5 mm
Natural frequency:Approx. 500 Hz, depending on tension range
Signal processing:Analog (Option: digital)
Temperature drift:Less than ±0.05 % full scale/ºC
Output signal:Standard: 0 – 1 V DC (analog) impedance: ≥ 5 kΩ
Option: 0 – 10 V DC (analog), 4 – 20 mA DC (current)
Option digital: USB (500 Hz), RS-232 (200 Hz), RS-422 (200 Hz) or Wi-Fi
Damping (fg):Standard: 30 Hz (other values on request)
Temperature range:10 – 45 ºC
Air humidity:85 % RH, max.
Power supply:+15…24 V DC, max. 21 mA (standard output)
Code A3: 50 mA, Code 422: 50 mA, Code 232: 40 mA
Housing material:Aluminium
Dimensions:See dimensions
Weight, net (gross):Up to model FSH-2000 approx. 420 g (530 g)
Model FSH-5000 and FSH-10K approx. 450 g (600 g)
Model FSH-20K and higher tension ranges approx. 490 g (650 g)

Specifications subject to change without notice!

Guide Rollers

Order-CodeLine Speed vmax. … m/minRoller Material
Standard4000Stainless steel 1.4125 (max. 4 mm Ø)
Code R1
4000Hard chrome-plated steel (3 – 9 mm Ø)
Code R4
1000Hardened steel (8 – 11 mm Ø)
for model FSH-50K and higher
Code R5
1000Hardened steel (12 – 15 mm Ø)
for model FSH-50K and higher
Code B62000Hardened steel, Width 6 mm
Code B102000Hardened steel, Width 10 mm

Standard Accessories

  1. EK0805 - USB Connecting Cable

    USB Kabel zum Verbinden des Sensors Code USB mit einem PC

    Cable for USB output to connect the tension meter to a PC.
    Cable length 3 m
    Order number: EK0805

    Only standard accessory for sensors with code USB!


Accessories (optional)

  1. SW-TI3 - Software Tension Inspect 3

    tension-inspect-3-weiss-einzelplatz

    Tension Inspect 3 Infos (PDF)

    For displaying and saving readings on a PC (Win 7 and higher; 32 bit and 64 bit).
    Only for sensors with digital output signal.
    Features:
    – Real-time reading
    – The readings are also shown in a X-Y- diagram (time/date-tension)
    – For data analysing the buffered diagram can be zoomed and scaled
    – Recording of the buffered readings as CSV-file (on user request)
    – Download of values to Excel
    Order number: SW-TI3


  2. E10071 - M9 Sub-Miniatur Connector

    Plug suitable for sensors of FS series,
    cable outlet 3.5 – 5 mm
    Ordering Example: E10071


  3. E10070 - M9 Sub-Miniatur Right Angle Plug

    Plug suitable for sensors of FS series,
    cable outlet 3.5 – 5 mm
    Ordering Example: E10070


  4. EK0620, EK0621 and EK0627 - Connecting Cable with M9 Sub-Miniatur Connector and Open Ends

    Connecting cable for an analog output.
    For connecting sensors of FS series to the display unit SC-PM.
    Order number: EK0620, Length 2 m
    Order number: EK0621, Length 5 m
    Order number: EK0627, Length 10 m

    Other cable length available on request!

     


  5. EK0622 and EK0623 - Connecting Cable with M9 Sub-Miniatur Right Angle Plug and Open Ends

    Connecting cable for an analog output.
    For connecting sensors of FS series to the display unit SC-PM.
    Order number: EK0622, Length 2 m
    Order number: EK0623, Length 5 m


  6. EK0624 - Connecting Cable with M9 Sub-Miniatur Connector and Diode Plug

    Connecting cable for analog output.
    For connecting sensors of FS series to the display unit SCD-1.
    Order number: EK0624, Length 2 m


  7. EK0640 - RS-232 Connecting Cable

    RS-232 connecting cable for sensors of FS series Code 232

    Connecting cable for tension sensor FSH with RS-232 interface – Code 232:
    This cable is needed to connect the sensor to a PC or an analog signal processing unit; AC adapter for 100 – 240 V with 3 adapters (EU/USA/UK) for power supply is included, 3 m long
    Order number: EK0640


  8. EK0643 - RS-232 Extension Cable

    anschlusskabel-r232-schnittstelle

    Extension cable for RS-232 connecting cable EK0640, length 2 m
    Order number: EK0643


  9. EBG510 - USB Adapter

    USB-RS-232 Adapter

    Adapter from RS-232 to USB.
    Order number: EBG510


Output Signal

Standard

Standard

Output signal: 0 – 1 V DC

Code A2

Code A2

Output signal: 0 – 10 V DC

Code A3

Code A3

Output signal: 4 – 20 mA DC

Code USB

Code USB

Output signal: USB
Up to 500 readings can be transferred per second. No external power supply is required

Code 232

Code 232

Output signal: RS-232
Up to 200 readings can be transferred per second.

Code WL

Code WL

Output signal: Wi-Fi

The Wi-Fi module is not licensed for all countries. Please contact us for further information!

Code 422

Code 422

Output signal: RS-422
max. 32 sensors can be connected in line to a PC.

For more information look at the sensor FSH-422.


Calibration Report

title page calibration certificate 3.1Inspection Certificate 3.1 according DIN EN 10204
including a calibration report is optional available.

 

Inspection Certificate 3.1 (PDF)
Spare Rollers

Title guide roller catalogueDownload an overview for the guide rollers.

 

Guide roller Catalogue (PDF)
Dimensions

Here you can find the dimensions of tension sensor FSH for download.
Drawing (PDF)
Delivery Includes

Tension sensor FSH with transport packaging, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charge

How To Order

To order tension sensor FSH:

Please indicate the complete order number e. g.:

Model with tension rangeCode guide rollers (if not standard)Code output signal (if not standard)Complete Order No.
FSH-10K+R1+A2=FSH-10K-R1-A2

Instruction Manual

Download the instruction manual of tension sensor FSH and FSH with RS-232 or USB output:
Instruction Manual FSH (PDF)

Instruction Manual FSH with RS-232 or USB output (PDF)

Wenn Sie ein Angebot benötigen oder bestellen wollen, kontaktieren Sie uns einfach!


+49 (0)8638 9410-0

+49 (0)8638 4825


Kontakt
Print page Print page