Stationary Electronic – Special Design

Model FS1
With non-rotating ceramic pin and outer guide rollers

Model FSH
With measuring head width 258 mm, anodized aluminium rollers with 58 mm Ø and radius 10 mm for PVC hoses

Model FSP
With sidewise guide plate and without roller offset

Model FSB1
With 50 mm roller width

Model FSB1
With measuring 225 mm head width and 200 mm centre distance

Model FSB1
With tension range up to 50 daN

Model TS1
With non-rotating ceramic pin and outside guide rollers, as well as sidewise guide plates

Model TS1
With 100 mm centre distance and U-grooved rollers

Model TS1
With sidewise guide plates

Model TS1
With sidewise guide plates and larger centre distance

Model TS1
With sealing gas connection and guide rollers with special teflon ball bearings

Model TS1
With index arm, ceramic pins and sealing gas connection

Model TS1
With additional guide roller to prevent the wire to jump of the roller

Model TS1
with tension range up to 6000 cN, 150 mm measuring head width and customized measuring rollers

Model TSF
Tape roller with big Ø for fragile materials to be measured, as fiber optics or glass fiber strands

Model TS1
With 110 mm center distance and 25 mm roller offset

Model TSH
With plastic right angle plug

Model TSH
Special designed guide rollers with special coating for carbon fibers CFK

Model TSL
With integrated length meter

Model TSL
With diode socket at a cable with a length of 25 cm

Model TSB1
1-roller-system with anti adhesive coating, e. g. scotch tape foils

Model TSB1
With wide special guide rollers made of stainless steel

Model TSB2
Measuring head width 180 mm, centre distance 150 mm

Model TSB2
Crank handle to open or close the sensor, as well as non-rotating ceramic tape roller

Model TSB2
With 100 mm wide measuring rollers with both-sided flange and additional front plate with cut-out

Model TSB2
With tension range up to 100 daN and stainless steel rollers with 100 mm width

Model SC-PM
19″ Housing with 3 display units built-in

Model SC-PM
10″ tabletop housing for 4 Sensors. The sensor that should displayed can be andjusted by a switch.