TOP
Menu

Torque Meter DTXS and DTXA

Measuring ranges 50.00 Ncm/2.000 Nm/5.000 Nm/10.00 Nm
resolution 0.01 Ncm/0.001 Nm/0.01 Nm

Desktop-torque meter with memory and output signal for checking the opening and close torque of screw caps of bottles, glass jars, cosmetics etc.

For applications in beverage, cosmetic and pharmaceutical industry etc.

Torque meter with digital output signal for data processing with a PC

CE mark
Category:

Special Features


Displaying the opening or closing torque (clockwise and counterclockwise torque)

2 selectable modes:
– Real Time:
to display load transients
– Peak: to capture the peak torque achieved during a test

Table for containers with Ø from 20 to 160 mm (small table for diameters from Ø 7 up to 50 mm is available) – standard unit

Programmable high/low setpoints for go/no-go testing with colour-coded indicators (orange, green, red) in the LED display and relay outputs

Torque meter with high internal sampling rate of 2000 times/sec

Display update time 16 times/sec

Torque meter with easy to read display (OLED)

Selectable units: Nm, kgfm, Lbf.in or Ncm, kgfcm, ozf.in

Storage of 1000 values for recall:
– on the display
– for data transfer to a PC
– for printing with report

3 output signals: USB, RS-232 and analog

Special features of model DTXA in comparison to standard unit DTXS


Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec).

2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording

Indication of two peak values per measurement, e. g. closure with rated break point

Standard Features


Torque meter for fast, accurate measuring

High repeatability

Easy to use

Inclusive 30 days trial version of Software »Force Recorder Professional«

Manufacturer`s certificate with measured values is included

Available Models – Standard Unit

ModelModelMeasuring Range
Resolution
DTXS-0.5N* DTXA-0.5N* 0 – 50.00 Ncm0.01 Ncm
DTXS-2N**DTXA-2N**0 – 2.000 Nm (200 Ncm)0.001 Nm (0.1 Ncm)
DTXS-5N**DTXA-5N**0 – 5.000 Nm (500 Ncm)0.001 Nm (0.1 Ncm)
DTXS-10N**DTXA-10N**0 – 10.00 Nm (1000 Ncm)0.01 Nm (1 Ncm)

* includes table DT-STL
** includes table DT-TB

Available Models – Self Configurated

ModelModelDescription
DTXS-0.5N-Z DTXA-0.5N-Zwithout table
DTXS-2N-Z DTXA-2N-Zwithout table
DTXS-5N-Z DTXA-5N-Z without table
DTXS-10N-Z DTXA-10N-Zwithout table
Specifications

Accuracy:±0.5 % full scale ±1 digit
Measuring frequency:2000 times/sec
Selectable units:Nm, Ncm, kgfm, kgfcm, Lbf.in and ozf.in
Display:OLED, 4 digit, 14 mm high
Overload capacity:Approx. 200 % full scale,
flashing display beyond 110 % full scale
Display update:16 times/sec
Memory:Internal memory for max. 1000 values (clockwise or counter clockwise torque and peak values)
Setpoints:MIN (-NG), MAX (+NG) programmable, with output signal
Output signal:USB
RS-232 (8, 1, N, 19200)
analog ±2 V DC
Open Collector 4x (+NG, Ok, -NG, OVL), max. 30 V DC, 10 mA
overload signal
Temperature range:0 – 40 °C
Air humidity:80 % RH, max.
Power supply:Rechargeable NiMH batteries (approx. 6.5 hours continuous use,
approx. 2 h charging time) and/or 100 – 240 V AC adapter
and two adapters (EU/USA)
Dimensions:305 x 233 x 127 mm (LxWxH)
Weight: net (gross.):Approx. 4900 g (5900 g)
Additional functions DTXA in comparison to standard torque meter DTXS:
Torque-angle-measurement:In combination with a test stand with linear scale torque-angle-measurements are possible e.g. MTS-10N-RA
Memory:Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
High low output:2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices
(e.g. PC, printer) for data recording
Extended peak mode:Indication of two peak values per measurement

Specifications subject to change without notice!

Possible Tables

  1. DT-TB - Table with 25 mm Urethane Pins

    not for DTXS-0.5N and DTXA-0.5N
    For samples with Ø from 20 up to 160 mm.
    Includes table pins (TB-P) with urethane surface, length 25 mm.
    Recommended for PET bottles, cans etc.
    Order number: DT-TB


  2. DT-TB-01 - Table with 26 mm V2A Pins

    not for DTXS-0.5N and DTXA-0.5N
    For samples with Ø from 20 up to 160 mm.
    Includes table pins (TB-01P) from stainless steel V2A, corrugated surface, length 26 mm.
    Recommended for aluminium cans, hard plastic containers etc.
    Order number: DT-TB-01


  3. DT-TB-02 - Table with 70 mm Urethane Pins

    not for DTXS-0.5N and DTXA-0.5N
    For samples with Ø from 20 up to 160 mm.
    Includes table pins (TB-02P) with urethane surface, length 70 mm.
    Recommended for conductor plates, lens of cameras, large bottles, etc.
    Order number: DT-TB-02


  4. DT-ST - Small Table with 10 mm Urethane Pins for max. 5 Nm nominal load

    Only for DTXS-2N, DTXS-5N, DTXA-2N and DTXA-5N
    For samples with Ø from 7 up to 50 mm.
    Includes table pins (ST-P) with urethane surface, length 10 mm.
    Recommended for locks, containers for eye drops, etc.
    Order number: DT-ST


  5. DT-ST-01 - Small Table with 10 mm V2A Pins for max. 5 Nm nominal load

    Only for DTXS-2N, DTXS-5N, DTXA-2N and DTXA-5N
    For samples with Ø from 7 up to 50 mm.
    Includes table pins (ST-01P) from stainless steel V2A, corrugated surface, length 10 mm.
    Recommended for electronic components, plugs, etc.
    Order number: DT-ST-01


  6. DT-ST-02 - Small Table with 30 mm Urethane Pins for max. 5 Nm nominal load

    Only for DTXS-2N, DTXS-5N, DTXA-2N and DTXA-5N
    For samples with Ø from 7 up to 50 mm.
    Includes table pins (ST-02P) with urethane surface, length 30 mm.
    Recommended for cosmetics boxes, door knobs, lamps, etc.
    Order number: DT-ST-02


  7. DT-STL - Small Table with 10 mm Urethane Pins for max. 2 Nm nominal load

    small table DT-STL for torque meter DTXS and DTXAOnly for DTXS-0.5N, DTXS-2N, DTXA-0.5N and DTXA-2N
    For samples with Ø from 7 up to 50 mm.
    Includes table pins (ST-P) with urethane surface, length 10 mm.
    Recommended for plastic tubes, etc.
    Order number: DT-STL


  8. DT-STL-01 - Small Table with 10 mm V2A Pins for max. 2 Nm nominal load

    small table DT-STL-01 for torque meter DTXS and DTXAOnly for DTXS-0.5N, DTXS-2N, DTXA-0.5N and DTXA-2N
    For samples with Ø from 7 up to 50 mm.
    Includes table pins (ST-01P) from stainless steel V2A, corrugated surface, length 10 mm.
    Recommended for motors, etc.
    Order number: DT-STL-01


  9. DT-STL-02 - Small Table with 30 mm Urethane Pins for max. 2 Nm nominal load

    small table DT-STL-02 for torque meter DTXS and DTXAOnly for DTXS-0.5N, DTXS-2N, DTXA-0.5N and DTXA-2N
    For samples with Ø from 7 up to 50 mm.
    Includes table pins (ST-02P) with urethane surface, length 30 mm.
    Recommended for cosmetic containers, etc.
    Order number: DT-STL-02


  10. DT-STLW - Small, wide Table with 10 mm Urethane Pins for max. 2 Nm nominal load

    small table DT-STLW for torque meter DTXS and DTXAOnly for DTXS-0.5N, DTXS-2N, DTXA-0.5N and DTXA-2N
    For samples with Ø from 10 up to 100 mm.
    Includes table pins (ST-P) with urethane surface, length 10 mm.
    Recommended for volume dials, etc.
    Order number: DT-STLW


  11. DT-STLW-01 - Small, wide Table with 10 mm V2A Pins for max. 2 Nm nominal load

    small table DT-STLW-01 for torque meter DTXS and DTXAOnly for DTXS-0.5N, DTXS-2N, DTXA-0.5N and DTXA-2N
    For samples with Ø from 10 up to 100 mm.
    Includes table pins (ST-01P) from stainless steel V2A, corrugated surface, length 10 mm.
    Recommended for motors, etc.
    Order number: DT-STLW-01


  12. DT-STLW-02 - Small, wide Table with 30 mm Urethane Pins for max. 2 Nm nominal load

    small table DT-STLW-02 for torque meter DTXS and DTXAOnly for DTXS-0.5N, DTXS-2N, DTXA-0.5N and DTXA-2N
    For samples with Ø from 7 up to 50 mm.
    Includes table pins (ST-02P) with urethane surface, length 30 mm.
    Recommended for bottle shaped containers, etc.
    Order number: DT-STLW-02


  13. DT-DC-6.5 - Torque Pin Chuck Ø 0.5 up to 6.5 mm

    Infinitely adjustable, Ø 0.5 up to 6.5 mm
    Order number: DT-DC-6.5


  14. DT-DC-6.5SUS - Torque Pin Chuck (V2A) Ø 0.5 up to 6.5 mm

    Infinitely adjustable, Ø 0.5 up to 6.5 mm, stainless steel (V2A)
    Order number: DT-DC-6.5SUS


  15. DT-DC-4 - Torque Pin Chuck Ø 0.5 up to 4 mm

    Infinitely adjustable, Ø 0.5 up to 4 mm (for torque meters with 2 or 5 Nm nominal load).
    Order number: DT-DC-4


  16. DT-DC-13 - Torque Pin Chuck Ø 1.2 up to 12 mm

    Infinitely adjustable, Ø 1.2 up to 13 mm (for torque meters with 5 or 10 Nm nominal load).
    Order number: DT-DC-13


Standard Accessories

  1. Software Force-Logger

    Software Force LoggerUSB cable approx. 1.5 m long, CD-ROM with USB-driver and software “Force-Logger” for data transfer


  2. ADW-6010 - AC Adapter

    Netzteil ADW-6010AC adapter for 100 – 240 V AC
    Order number: ADW-6010


  3. Inspection Certificate

    Hersteller PrüfprotokollDelivery includes a manufacturers inspection certificate free of charge.


Accessories (optional)

  1. SW-21 - Force Recorder Light

    Force Recorder Light

    Software for data acquisition by USB output
    – Force-time graph
    – Force gauge function setting
    – Data storage as CSV file
    Requirements: Microsoft Windows 8.1/10/11
    Order number: SW-21


  2. SW-22 - Force Recorder Standard

    Force Recorder Standard

    Additional functions in comparison to Force Recorder Light:
    5 graphs at maximum can be displayed in a table
    Requirements: Microsoft Windows 8.1/10/11
    Order number: SW-22


  3. SW-23 - Force Recorder Professional

    Force Recorder Professional

    Additional function in comparison to Force Recorder Light
    – 5 graphs at maximum can be displayed in a table
    – Force-displacement graphing (possible only in combination with a test stand with linear
    scale)
    Requirements: Microsoft Windows 8.1/10/11
    Order number: SW-23


  4. SW-26 - Force Recorder Plus

    Software Force Recorder Plus

    Software for Data acquisition by USB output:
    – 10 graphs at maximum can be displayed in a table
    – data acquisition of 4 force gauges simultaneously
    – force gauge function setting
    – data storage as CSV file
    Requirements: Microsoft Windows 8.1/10/11
    Order number: SW-26


  5. SW-13 - Force Logger Plus

    Force Logger Plus

    Software for Data acquisition by USB output:
    – data acquisition of 4 force gauges simultaneously
    – force gauge function setting
    – data storage as CSV file
    Requirements: Microsoft Windows 8.1/10/11
    Order number: SW-13


  6. TB-P - Table Pins 25 mm Urethane

    Spannstifte TB-P für den großen Spanntisch1 set (4 pieces), 25 mm long with urethane surface for the table.
    Recommended for PET bottles, cans etc.
    Order number: TB-P


  7. TB-01-P - Table Pins 26 mm V2A

    Spannstifte TB-01P für den großen Spanntisch
    1 set (4 pieces), 26 mm long from stainless steel for the table.
    Recommended for aluminium cans, hard plastic containers etc.
    Order number: TB-01P


  8. TB-02-P - Table Pins 70 mm Urethane

    Spannstifte TB-02P für den großen Spanntisch1 set (4 pieces), 70 mm long with urethane surface for the table.
    Recommended for conductor plates, lens of cameras, large bottles, etc.
    Order number: TB-02P


  9. ST-P - Table Pins 10 mm Urethane

    Spannstift ST-P für den kleinen Spanntisch1 set (4 pieces), 10 mm long with urethane surface for the small table.
    Recommended for locks, containers for eye drops, etc.
    Order number: ST-P


  10. ST-01P - Table Pins 10 mm V2A

    Spannstift ST-01P für den kleinen Spanntisch1 set (4 pieces), 10 mm long from stainless steel for the small table.
    Recommended for electronic components, plugs, etc.
    Order number: ST-01P


  11. ST-02P - Table Pins 30 mm Urethane

    Spannstift ST-02P für den kleinen Spanntisch1 set (4 pieces), 30 mm long with urethane surface for the small table.
    Recommended for cosmetics boxes, door knobs, lamps, etc.
    Order number: ST-02P


  12. TB-SP - Sample Stage

    To get a flat working face on the table, for placing the sample. 1 set = 2 pieces.
    Only for DT-TB, DT-TB-01 and DT-TB-02
    Order number: TB-SP


  13. 40018I - Accumulator

    Akku DP-308Nickel metal hydride accumulator, 2-pole connector
    3.6 V, 1300 mAh
    Order number: 40018I


  14. Calibration Certificate

    KalibrierberichtCalibration certificate with calibration report is optional available.


Connecting Cables (optional)

  1. CB-108 - Connecting Cable analog

    analoges Anschlusskabel CB-101For analog output, for connection to a line recorder.
    Length approx. 3 m
    Order number: CB-108


  2. CB-208 - Connecting Cable RS-232

    RS 232 Anschlusskabel CB-208For RS-232 output with sub D 9 female, for connection to PC.
    Length approx. 3 m
    Order number: CB-208


  3. CB-808 - Connecting Cable Trigger Input

    Anschlusskabel für Triggereingang CB-808For trigger input (input signal from an external device e. g. electronic switch to stop the measurement)
    Order number: CB-808


  4. CB-908 - Connecting Cable Open Ends

    Anschlusskabel mit offenen Enden CB-908With open ends (37-pin) for all available output signals to connect an unique device.
    Order number: CB-908


Dimensions

Dimensions of torque meter DTXS and DTXA to download:
Delivery Includes - Standard Unit

Torque meter, 1 table DT-TB, 1 set spring pins 25 mm long, AC adapter, manufacturer`s inspection certificate, USB cable 1.5 m, USB adapter (only DTXA), CD-ROM with driver, simple software for communication and data logging »ZT-Logger« operating instructions in English

Instruction Manual

Download the instruction manual for torque meters DTXS and DTXA:

Product Videos

YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video


Mounting accessories

YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video


Invert +/- sign

YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video


Torque Measurement

YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video


Adjusting the measuring mode; Determine a first and second peak value (only HTGA)


YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video


Adjust high/low setpoints

YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video


Switch to the multi display; Adjust the bargraph display

YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video


Activate auto power off

If you want to get a quote or want to place an order, please contact us!


+49 (0)8638 9410-0

+49 (0)8638 4825