TOP
Menu

Tachometer DT-105A

Hand-held tachometer for accurate contact measurement of revolution of engines or shafts as well as surface speed and length e.g. belts and conveyer belts

Tachometer with LCD display and many selectable units

High quality hand-held tachometer for professional use

CE mark
Categories: ,

Special Features


Hand-held tachometer DT-105A for contact measuring of revolutions, line speeds and length;
the measurtement is carried out, as long as the measuring key is pressed

Conact measuring tachometer

Contact measurement of revolutions, surface speed and length



For exact measurements of revolutions per minute, total revolutions, length and velocity with different metric and English units

16 user selectable measuring units (rpm; rev; m/min; m/h; ft/min; ft/h; yd/min; yd/h; in/min; in/h; mil/h; cm; m; in; ft; yd)

Tachometer with large, electricity saving LCD display

Hand-held tachometer with automatic and manual memory (MAX, MIN, last and 10 separate readings) for recall in display

Rugged aluminium housing with fixing for tripod (1/4-20 UNC thread)

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Standard Features


Easy to use

Certificate of Compliance with the order 2.1 according EN 10204 is included

Available Models

ModelApplicationDisplay
DT-105Acontact measuring LCD
alternative
DT-107Acontact measuring LEDmore
DT-205Lcontact measuring, non-contact LCDmore
DT-207Lcontact measuring, non-contact LEDmore
DT-2100contact measuring, non-contact OLEDmore

All models are available with 12 inch (circumference) measuring wheels:
Grooved measuring wheel: e. g. Tachometer DT-105A-12C
Rubber measuring wheel: e. g. Tachometer DT-105AS (12″ circumference measuring wheel which is offered for safer and easier surface speed measurement by keeping the users hand farther from the moving surface and slowing down the rotational speed)

Specifications

Measuring range:
(floating decimal point)
Revolution: 0.1 – 25000 rpm; 6 – 9999.9 rph
Speed: e. g. 0.02 – 3810 m/min; 0.9 – 99999 m/h;
0.6 – 99999 in/min; 0.05 – 12500 ft/min; 3 – 99999 ft/h; 0.02 – 4167 yd/min;
1.0 – 9999 yd/h; 0.0006 – 142.5 mil/h
Length: 0.5 – 99999 cm; 0.005 – 99999 m; 0.1 – 9999.9 in; 0.01 – 99999 ft;
0.005 – 9999.9 yd
Accuracy:Revolution: 0 – 999.9 rpm (±0.1 rpm) ±1 digit
1000 – 9999.9 rpm (±1 rpm) ±1 digit
10000 – 25000 rpm (±0.01% of reading) ±1 digit
Speed and length: ±0.4 % of reading, ±1 digit
Measuring units:Revolution: rpm; rph
Total revolutions (counter): rev
Speed: m/min; m/h; ft/min; ft/h; yd/min;yd/h; inch/min; in/h; mil/h
Length: cm; m; inch; ft; yd
Memory:13 readings (incl. MIN + MAX + Last reading) for 5 min after last use
Resolution:Length: 0.00254 m/Impulse (with 6 inch measuring wheel)
Revolution: 60 Impulse/revolution
Display:5 digit, LCD 12 mm
Display update:1 s
Over range indicator:Display is flashing
Auto power off:After 5 min of non-use
Power supply:2 x 1.5 V Type AA; approx. 65 h continuous use
Low battery indicator:”LO BAT” flashes at the display
Temperature range:5 – 45 °C
Air humidity:85 % RH, max.
Housing material:Die-cast aluminium
Tripod fixing:1/4-20 UNC thread
Dimensions:183 x 60 x 46 mm (LxWxH)
Weight, net (gross):Approx. 350 g (approx. 800 g)

Specifications subject to change without notice!

Standard Accessories

  1. Rubber Tip

    Tip for contact measurement of revolutions (rpm)
    Order number: 10006S


  2. Funnel Tip

    Tip for contact measurement of revolutions (rpm)
    Order number: 10007S


  3. Rubber Measuring Wheel

    Wheel with 6 inch circumference for measuring line speeds
    Order number: 10002S


  4. Extension

    Shaft 75 mm long
    Order number: 10008S


Accessories (optional)

  1. Grooved Wheel

    Tachometer Modellreihe DT mit NutenmessradMeasuring Wheel (6 inch circumference) with special groove for measuring yarn and wire speeds.
    Order number: 10005S


  2. Rubber Measuring Wheel

    Tachometer Modellreihe DT mit GummimessradWheel with 12 inch circumference for measuring line speeds.
    Only for tachometer DT-105AS which is delivered with 12 inch wheel. Otherwise the device shows a wrong value!
    Order number: 10003S


  3. Calibration Certificate

    KalibrierberichtCalibration certificate with calibration report is optional available.


Dimensions

Dimensions of tachometer DT-105A to download:
Delivery Inludes

Lieferumfang Tachometer DT-105ATachometer DT-105A with batteries, carrying case, 2 rubber tips, 1 funnel, 1 rubber measuring wheel (6 inch circumference), 1 extension 75 mm, Certificate of Compliance with the order 2.1 according EN 10204 free of charge and operating instructions in German and English

If you want to get a quote or want to place an order, please contact us!


+49 (0)8638 9410-0

+49 (0)8638 4825


Cookie-Einstellung

Bitte treffen Sie eine Auswahl. Weitere Informationen zu den Auswirkungen Ihrer Auswahl finden Sie unter Hilfe.

Treffen Sie eine Auswahl um fortzufahren

Ihre Auswahl wurde gespeichert!

Hilfe

Hilfe

Um fortfahren zu können, müssen Sie eine Cookie-Auswahl treffen. Nachfolgend erhalten Sie eine Erläuterung der verschiedenen Optionen und ihrer Bedeutung.

  • Alle Cookies zulassen:
    Jedes Cookie wie z.B. Tracking- und Analytische-Cookies.
  • Nur First-Party-Cookies zulassen:
    Nur Cookies von dieser Webseite.
  • Keine Cookies zulassen:
    Es werden keine Cookies gesetzt, es sei denn, es handelt sich um technisch notwendige Cookies.

Sie können Ihre Cookie-Einstellung jederzeit hier ändern: Datenschutz. Impressum

Zurück