Tachometer DT-2100

Hand-held tachometer for accurate contact measurement and non-contact measurement of revolution of engines or shafts as well as surface speed and length e.g. belts and conveyer belts

High quality hand-held tachometer for professional use

Tachometer with OLED display, data-logging and USB output

Categories: DT Series, Tachometer

Print page

Special Features

Hand-held tachometer DT-2100 for non-contact measurement of revolutions and contact measurement of revolutions, line speed and length with an adapter;
the measurtement is carried out, as long as the measuring key is pressed

non-contact measurement with tachometer and laser warning symbol

Non-contact measurement of revolutions, using a laser beam and reflective tape

Contact measurement of revolutions, surface speed and length

Tachometer DT-2100 with large, easy to read OLED display, recommended at adverse lighting conditions

Readings can be displayed as unique X-Y graph (line graph, tacho graph or bargraph)

USB interface, optional software for data viewing and statistics on a PC

For exact measurement of revolutions per minute, total revolutions, length and velocity with different metric and English units

Adjustable MIN and MAX values with upper and lower limit icons in the display

Hand-held tachometer DT-2100 can be set for single point or continuous logging. Data points, as well as statistics (MIN, MAX, AVG) can be stored and recalled to the display

Readings can be saved in 5 groups

All data can be reviewed in the display or downloaded to a PC using an optional software

Programmable multiplier to convert reading based on wheel diameter, gear ratios etc.

Display can be inverted to optimize the viewing angle.

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Standard Features

Good visible, harmless laser beam

Measuring distance up to 4 m

Housing with 1/4-20 UNC threaded insert for fixed mounting

Low weight Polycarbonate housing

Certificate of Compliance with the order 2.1 according EN 10204 is included

Available Models

Model	Application	Display
DT-2100	contact measuring, non-contact	OLED
	alternative
DT-105A	contact measuring	LCD	more
DT-107A	contact measuring	LED	more
DT-205L	contact measuring, non-contact	LCD	more
DT-207L	contact measuring, non-contact	LED	more

Specifications

Measuring range: (floating decimal point)	Revolution (non-contact): 6 – 99999 rpm; Revolution (contact): 0.8 – 25000 rpm; Revolution (contact – low speed adapter): 0.10 – 10.00 rpm Speed: e. g. 0.0 – 3810 m/min; 0.0 – 228.6 km/h; 0.6 – 150000 in/min; 0.0 – 12500 ft/min; 0.0 – 4166.6 yd/min; 0.0006 – 142.045 mil/h Length: 0.0 – 99999 cm; 0.0 – 99999 m; 0.0 – 99999 in; 0.0 – 99999 ft, 0.0 – 99999 yd
Accuracy:	Standard adapter: ± 0.006 % of reading, ±1 digit Low speed adapter: 0.10 – 1.00 rpm: ± 0.06 rpm 1.01 – 6.00 rpm: ± 0.60 rpm 6.01 – 10.00 rpm: ± 1.00 rpm
Measuring units:	Revolution: rpm Total rotations (counter): rev Speed: km/h; m/min; ft/min; cm/min; yd/min; in/min; mil/h, rev/sec, m/sec, cm/s, in/sec Length: cm; m; km; in; ft; yd
Laser, class 2:	Output<1 mW, wavelength 650 nm, max. measuring distance 4 m
Memory:	Internal memory for max. 1000 readings
Resolution:	Length: 0.01905 m/impulse (with adapter), Revolution: 8 impulse/revolution (with adapter)
Output signal:	USB
Display:	OLED
Display update:	100 msec, 500 msec, 1 sec or 5 sec
Over range indicator:	Display is flashing
Auto power off:	After 1, 10 or 30 min of non-use
Power supply:	2 x 1.5 V type AA, battery life approx. 20 h at 20 % brightness or USB
Temperature range:	0 – 40 °C
Housing material:	Polycarbonate
Tripod fixing:	1/4-20 UNC thread
Dimensions:	155 x 55 x 35 mm (LxWxH)
Weight, net (gross):	Approx. 169 g (567 g)

Specifications subject to change without notice!

Standard Accessories

10006S - Rubber Tip
Tip for contact measurement of revolutions (rpm)
Order number: 10006S

10007S - Funnel Tip
Tip for contact measurement of revolutions (rpm)
Order number: 10007S

10002S - Rubber Measuring Wheel
Wheel 6 inch circumference for measuring line speeds
Order number: 10002S

10008S - Extension Shaft
Shaft 75 mm long
Order number: 10008S

10017S - Standard Adapter
for contact measurements
Order number: 10017S

Reflective Tapes
1 page (35 pieces), self-adhesive

Accessories (optional)

SW-25 - Software
Software for to display and save readings on a PC (Windows 7 and higher; 32 bit and 64 bit). A USB cable is included in the scope of delivery
Order number: SW-25