TOP
Menu

Tachometer DT-205LS

Hand-held tachometer for accurate contact measurement and non-contact measurement of revolution of engines or shafts as well as surface speed and length e.g. belts and conveyer belts

Tachometer with LCD display and many selectable units

High quality hand-held tachometer for professional use

2 in 1

CE mark
Categories: ,

Special Features


Hand-held tachometer DT-205LS for non-contact measurement of revolutions and contact measurement of revolutions, line speed and length with an adapter;
the measurement is carried out, as long as the measuring key is pressed

non-contact measurement with tachometer and laser warning symbol

Non-contact measurement of revolutions, using a laser beam and reflective tape


Conact measuring tachometer

Contact measurement of revolutions, surface speed and length



For exact measurements of revolutions per minute, total revolutions, length and velocity with different metric and English units

9 User selectable measuring units (rpm; m/min; ft/min; yd/min; in/min; m; in; ft; yd)

Tachometer with large, electricity saving LCD display

Tachometer DT-205LS with automatic and manual memory (MIN, MAX, last and 10 separate readings) for recall in display

Rugged aluminium housing with fixing for tripod (1/4-20 UNC thread)

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Standard Features


Good visible, harmless laser beam

Measuring distance up to 2 m

Easy to use

Certificate of Compliance with the order 2.1 according EN 10204 is included

Available Models

ModelApplication Display
DT-205LScontact measuring and non-contact LCD
alternative
DT-207LScontact measuring and non-contact LEDmore
DT-105AScontact measuring LCDmore
DT-107AScontact measuring LEDmore

The Tachometer is also available as DT-205L with 6 inch (circumference) rubber measuring wheel.

Specifications

Measuring range:
(floating decimal point)
Revolution (contact): 6 – 25000 rpm;
Revolution (non-contact): 6 – 99999 rpm
Speed: e. g. 0.11 – 3810 m/min; 0.9 – 99999 m/h; 0.6 – 99999 in/min;
0.05 – 12500 ft/min; 3 – 99999 ft/h; 0.02 – 4167 yd/min; 1.0 – 9999 yd/h;
0.0006 – 142.5 mil/h
Length: 0.5 – 99999 cm; 0.005 – 99999 m; 0.1 – 9999.9 in; 0.01 – 99999 ft, 0.005 – 9999.9 yd
Accuracy:6 – 8300 rpm (±1 rpm) ±1 digit
8301 – 25000 rpm (±2 rpm) ±1 digit
25001 – 99999 rpm (±0.01% of reading) ±1 digit
Speed and length: ±0.4 % of reading ±1 digit
Measuring units:Revolution: rpm; rph
Total rotations (counter): rev
Speed: m/min; m/h; ft/min; ft/h; yd/min; yd/h; in/min; in/h; mil/h
Length: cm; m; in; ft; yd
Laser, class 2:Output<1 mW, wavelength 670 nm, max. measuring distance 2 m
Memory system:13 readings (incl. MIN + MAX + last) for 5 min after last use
Resolution:Length: 0.03810 m/impulse (with adapter)
Revolution: 8 impulse/revolution (with adapter)
Display:5 digit, LCD 12 mm
Display update:1 sec
Over range indicator:Display is flashing
Auto power off:After 5 min of non-use
Power supply:2 x 1.5 V Type AA, approx. 40 h continuous use
Low battery indicator:”Low Bat” flashes at the display
Temperature range:5 – 45 °C
Air humidity:85 % RH, max.
Housing material:Die-cast aluminium
Tripod fixing:1/4-20 UNC thread
Dimensions:203 x 60 x 46 mm (LxWxH)
Weight, net (gross):Approx. 350 g (800 g)

Specifications subject to change without notice!

Standard Accessories

  1. 10006S - Rubber Tip

    Tachometer DT-205LS with rubber tipTip for contact measurement of revolutions (rpm)
    Order number: 10006S


  2. 10007S - Funnel Tip

    Tachometer DT-205LS with funnel tipTip for contact measurement of revolutions (rpm)
    Order number: 10007S


  3. 10003S - Rubber Measuring Wheel

    Tachometer DT-205LS with 12 inch rubber measuring wheelWheel with 12 inch circumference for measuring line speeds
    Order number: 10003S


  4. 10008S - Extension

    Tachometer DT-205LS with extension shaft and rubber tipShaft 75 mm long
    Order number: 10008S


  5. 10012S - Adapter - old version

    Adapter with serrated lock washer (old version)
    For contact measurement with series DT
    Order number: 10012S


  6. 10015S - Adapter - latest version

    Adapter without serrated lock washer (current version)
    for contact measurement with series DT
    Order number: 10015S


  7. Reflective Tapes

    1 Blatt mit 35 Reflexmarken1 page (35 pieces), self-adhesive


Accessories (optional)

  1. 10009S - Reflective Tape Set

    1 Satz ReflexmarkenSet with 140 self-adhesive reflective tapes, (1 Set = 4 x 35 pieces)
    Order number: 10009S


Calibration Report

Kalibrierzeugnis-Calibration Certificate Hans Schmidt GmbHCalibration Certificate
including a calibration report is optional available.

 

Dimensions

Dimensions of tachometer DT-205LS to download:
Delivery Inlcudes

Scope of delivery Tachometer DT-205LSTachometer DT-205LS with 2 batteries, carrying case, 1 adapter H, 2 rubber tips, 1 funnel, 1 measuring wheel with 12 inch circumference, 1 extension, 1 page reflective tapes (35 pieces), Certificate of Compliance with the order 2.1 according EN 10204 free of charge and operating instructions in German and English

If you want to get a quote or want to place an order, please contact us!


+49 (0)8638 9410-0

+49 (0)8638 4825