TOP
Menu

Tachometer DT-207LS

Hand-held tachometer for accurate contact measurement and non-contact measurement of revolution of engines or shafts as well as surface speed and length e.g. belts and conveyer belts

Tachometer with LED display and many selectable units

High quality hand-held tachometer for professional use

2 in 1

CE mark
Categories: ,

Special Features


Hand-held tachometer DT-207LS for non-contact measurement of revolutions and contact measurement of revolutions, line speed and length with an adapter;
the measurement is carried out, as long as the measuring key is pressed

non-contact measurement with tachometer and laser warning symbol

Non-contact measurement of revolutions, using a laser beam and reflective tape


Conact measuring tachometer

Contact measurement of revolutions, surface speed and length



For exact measurement of revolutions per minute, total revolutions, length and velocity with different metric and English units

9 User selectable measuring units (rpm; m/min; ft/min; yd/min; in/min; m; in; ft; yd)

Tachometer DT-207LS with large, red, easy to read LED display, recommended at adverse lighting conditions

Hand-held tachometer DT-207LS with automatic and manual memory (MAX, MIN, last and 10 separate readings) for recall in display

Rugged aluminium housing with fixing for tripod (1/4-20 UNC thread)

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Standard Features


Measuring distance up to 2 m

Easy to use

Certificate of Compliance with the order 2.1 according EN 10204 is included

Available Models

ModelApplication Display
DT-207LScontact measuring and non-contact LED
alternative
DT-205LScontact measuring and non-contact LCDmore
DT-105AScontact measuring LCDmore
DT-107AScontact measuring LEDmore

The Tachometer is also available as DT-207L with 6 inch (circumference) rubber measuring wheel.

Specifications

Measuring range:
(floating decimal point)
Revolution (contact): 6 – 25000 rpm;
Revolution (non-contact): 6 – 99999 rpm;
Speed: e. g. 0.02 – 3810 m/min; 0.9 – 99999 m/h; 0.6 – 99999 in/min; 0.05 – 12500 ft/min; 3 – 99999 ft/h; 0.02 – 4167 yd/min;
1.0 – 9999 yd/h; 0.0006 – 142.5 mil/h
Length: 0.5 – 99999 cm; 0.005 – 99999 m; 0.1 – 9999.9 in; 0.01 – 99999 ft, 0.005 – 9999.9 yd
Accuracy:6 – 8300 rpm (±1 rpm) ±1 digit
8301 – 25000 rpm (±2 rpm) ±1 digit
25000 – 99999 rpm (±0.01% of reading) ±1 digit
Speed and length: ±0.4 % of reading ±1 digit
Measuring units:Revolution: rpm; rph
Total rotations (counter): rev
Speed: m/min; m/h; ft/min; ft/h;yd/min; yd/h; in/min; in/h; mil/h
Length: cm; m; in; ft; yd
Laser, class 2:Output<1 mW, wavelength 670 nm, max. measuring distance 2 m
Memory:13 readings (incl. MIN + MAX + LAST) for 5 min after last use
Resolution:Length: 0.03810 m/impulse (with adapter),
Revolution: 8 impulse/revolution (with adapter)
Display:5 digit, LED 10 mm
Display update:1 sec
Over range indicator:Display is flashing
Auto power off:After 10 s of non-use
Power supply:2 x 1.5 V type AA, approx. 25 h continuous
Low battery indicator:”B” flashes at the display
Temperature range:5 – 45 °C
Air humidity:85 % RH, max.
Housing material:Die-cast aluminium
Tripod fixing:1/4-20 UNC thread
Dimensions:203 x 60 x 46 mm (LxWxH)
Weight, net (gross):Approx. 350 g (800 g)

Specifications subject to change without notice!

Standard Accessories

  1. 10006S - Rubber Tip

    Tachometer DT-207LS with rubber tipTip for contact measurement of revolutions (rpm)
    Order number: 10006S


  2. 10007S - Funnel Tip

    Tachometer DT-207LS with funnel tipTip for contact measurement of revolutions (rpm)
    Order number: 10007S


  3. 10003S - Rubber Measuring Wheel

    Tachometer DT-207LS with 12 Inch rubber measuring wheelWheel with 12 inch circumference for measuring line speeds
    Order number: 10003S


  4. 10008S - Extension

    Tachometer DT-207LS with extension shaft and rubber tipShaft 75 mm long
    Order number: 10008S


  5. 10012S - Adapter - old version

    Adapter with serrated lock washer (old version)
    For contact measurement with series DT
    Order number: 10012S


  6. 10015S - Adapter - new version

    Adapter without serrated lock washer (current version)
    for contact measurement with series DT
    Order number: 10015S


  7. Reflective Tapes

    1 Blatt mit 35 Reflexmarken1 page (35 pieces), self-adhesive


Accessories (optional)

  1. 10009S - Reflective Tape Set

    1 Satz ReflexmarkenSet with 140 self-adhesive reflective tapes, (1 Set = 4 x 35 pieces)
    Order number: 10009S


  2. Calibration Certificate

    KalibrierberichtCalibration certificate with calibration report is optional available.


Dimensions

Dimensions of tachometer DT-207LS to download:
Delivery Includes

Scope of delivery tachometer DT-207LSTachometer DT-207LS with 2 batteries, carrying case, 1 adapter H, 2 rubber tips, 1 funnel, 1 rubber measuring wheel with 12 inch circumference, 1 extension shaft 75 mm, 1 leaflet reflective tapes (35 pieces), Certificate of Compliance with the order 2.1according EN 10204 free of charge and operation instructions in German and English

If you want to get a quote or want to place an order, please contact us!


+49 (0)8638 9410-0

+49 (0)8638 4825