Force Gauge eZT

Measuring range available
0 - 20 kN (tension and compression)
0.5 Nm - 10 Nm (torque)

Digital force gauge for determination of compression, tension and torque forces, usable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency

High quality force measuring unit with interface (RS-232, USB and analog) and memory This device has a fast measuring frequency for exact acquisition of peak values

Different load cells, calibrated to the force gauge, can be connected

Categories: Digital Force Gauges with outputs, Force Gauge and Test Stands

Print page

Special Features

Different load cells of series e, calibrated to force gauge eZT, can be used.

2 operation modes:
real time – display the actual tension or compression force
peak force – peak force – to measure the peak force during a test

Force gauge eZT with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values

Display update time 16 times/sec

Easy to read display (OLED)

The header and footer of the display can be customized, as well as switched on and off

Programmable high/low set-points for go/no-go testing:
with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs

Storage of 1000 values, which can be recalled:
– on the display
– data transfer to a PC
– for printing with report

Output signal:
– RS-232 for connecting to a PC
– USB
– analog ±2 V DC

Display of Force gauge eZT can be reversed for inverted use; e. g. on vertical test stand

»Zero Set« to zero the gauge in all operating positions

Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX

Force gauge eZT with user switchable units: N, kgf (gf) and lbf (ozf)

Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)

In combination with a test stand with linear scale, force-displacement measurements are possible with force gauge eZT.

Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)

2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording

Indication of two peak values per measurement.

Standard Features

The accuracy is depending on the connected load cell

Approx. 200 % overload protection

For hand-held use or mounting on test stand

Ergonomically-designed, rugged die-cast aluminium housing

Non-slip rubber grip

Operates on rechargeable battery and/or AC adapter

Depending on the application we have a wide range of load cells for force gauge eZT in our program.

Find further information at load cells

We have a wide range of test stands, to assure consistent, identical measuring conditions with force gauge eZT.

Find further information at test stands

Specifications

Measuring principle:	Bidirectional force sensor with strain gauge
Accuracy:	±0.2 % – 3.5 % full scale depending on the used load cell
Measuring units:	N, kgf (gf), lbf (ozf) selectable
Display:	OLED, 4 digit
Sampling rate:	2000 times/sec
Overload capacity:	Approx. 200 % full scale, symbol flashes at 110 % full scale
Display update time:	16 times/sec
Memory:	Internal memory for max. 1000 values recallable peak – compression/tension
Setpoints:	Programmable Max/Min setpoint with color-coded indicators in the LED display
Output signal setpoints:	Open collector: +NG, OK, -NG, OVL (to stop feed at Fmax or overload)
Output signal:	RS-232 (8, 1, N, 19200), analog ±2 V DC, USB
Temperature range:	0 – 40 °C
Air humidity:	20 – 80 % RH, max.
Power supply:	Rechargeable NiMH batteries (approx. 6.5 h continuous use, approx. 2 h charging time) and/or 100 – 240 V AC adapter and two adapters (EU/USA)
Housing material:	Die-cast aluminium
Housing dimensions:	191 x 75 x 34 mm (LxWxH)
Weight, net (gross):	Approx. 450 g
Force-displacement measurement:	In combination with a test stand with linear scale force-displacement measurements are possible
Memory:	Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
High low output:	2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording

Specifications subject to change without notice!

Standard Accessories

Force Logger
USB cable approx. 1.5 m long, CD-ROM with USB-driver and software “Force Logger” for data transfer

ADW-6010 - AC Adapter
AC adapter For 100 – 240 V AC
Order number: ADW-6010

Zubehör (optional)

SW-21 - Force Recorder Light
Force Recorder Light Info (PDF)
Software for data acquisition by USB output
– Force-time graph
– Force gauge function setting
– Data storage as CSV file
Requirements: Microsoft Windows 8.1/10/11
Order number: SW-21

SW-22 - Force Recorder Standard
Force Recorder Standard Info (PDF)
Additional functions in comparison to Force Recorder Light:
5 graphs at maximum can be displayed in a table
Requirements: Microsoft Windows 8.1/10/11
Order number: SW-22

SW-23 - Force Recorder Professional
Force Recorder Professional Info (PDF)
Additional function in comparison to Force Recorder Light
– 5 graphs at maximum can be displayed in a table
– Force-displacement graphing (possible only in combination with a test stand with linear
scale)
Requirements: Microsoft Windows 8.1/10/11
Order number: SW-23

SW-26 - Force Recorder Plus
Force Recorder Plus Info (PDF)
Software for Data acquisition by USB output:
– 10 graphs at maximum can be displayed in a table
– data acquisition of 4 force gauges simultaneously
– force gauge function setting
– data storage as CSV file
Requirements: Microsoft Windows 8.1/10/11
Order number: SW-26

SW-13 - Force Logger Plus
Force Logger Plus Info (PDF)
Software for Data acquisition by USB output:
– data acquisition of 4 force gauges simultaneously
– force gauge function setting
– data storage as CSV file
Requirements: Microsoft Windows 8.1/10/11
Order number: SW-13

FOH-1 - Handle
For easy use the force gauge ZTA up to 1000 N can be equipped with a handle. Therefore especially higher forces can be measured more easily.
Order number: FOH-1

Clamping Tools
Depending on the application we have a lot of clamping tools and clamps for force gauge ZTA in our programm.
Find further information at clamps and testing devices

40018I - Accumulator
Nickel metal hydride accumulator, 2-pole connector
3.6 V, 1300 mAh
Order number: 40018I

Anschlusskabel (optional)

CB-108 - Connecting Cable analog
Connecting cable for analog output, for connection to a line recorder.
Length approx. 3 m
Order number: CB-108

CB-208 - Connecting Cable RS-232
Connecting cable for RS-232 output with sub D 9 female, for connection to PC.
Length approx. 3 m
Order number: CB-208

CB-508 - Connecting Cable MX
Connecting cable for force gauge ZTA with test stand (Series MX) to stop feed at Fmax or overload (force control).
Length approx. 1.5 m
Order number: CB-508

CB-528 - Connecting Cable MX2, EMX
Connecting cable for force gauge ZTA with test stand (Series MX2 and EMX) to stop feed at Fmax or overload (force control).
Length approx. 1.5 m
Order Number: CB-528

CB-718 - Connecting Cable EMX-FA (firmware 2.0 or later), MX2-FA
Connecting cable for force gauge ZTA with test stand (series EMX-FA and MX2-FA) to enable force-displacement measurement.
Length approx. 1.5 m
Order number: CB-718

CB-728 - Connecting Cable EMX-FA (firmware earlier than 2.0)
Connecting cable for force gauge ZTA with test stand (EMX-FA) to enable force-displacement measurement.
Length approx. 1.5 m
Order number: CB-728

DB-808 - Connecting Cable trigger input
Connecting cable for trigger input (input signal from an external device e. g. electronic switch to stop the measurement)
Order number: CB-808

CB-908 - Connecting Cable with open ends
Connecting cable with open ends (37-pin) for all available output signals to connect force gauge ZTA an unique device.
Order number: CB-908