TOP
Menu
Home > Force Gauge and Test Stands > Physical Therapy and Strength Testing Kits > Force Gauge RDSV-1000N

Force Gauge RDSV-1000N

Measuring Range 0 - 1000 N

Electronic force gauge for determination of muscle strength, useable for numerous applications in rehabilitation and physical therapy

Force measuring device with USB and RS-232 interface

Low cost standard model for compression/tension force

CE mark
Categories: ,
Print page Print page

Special Features


3 operation modes:
real time – display the actual tension or compression force
peak force – to measure the peak force during a test
continuity peak mode – to measure the peak force for each single measurement

Force gauge RDSV-1000N with high sampling rate of 1000 times/sec to measure the peak force

Display update 8 times/sec

Storage of 1000 values, which can be recalled:
– on the display
– data transfer to a PC

Output signal:
– USB
– RS-232

Force gauge RDSV-1000 with user switchable units: N, gf (kgf) and ozf (lbf)

Programmable high/low set-points for go/no-go testing:
Display: good (OK), underrun/exceeding (OK is not displayed)

»Zero Set« to zero the gauge in all operating positions. Alarm signal, if the actual position differs to much from the calibration position

Mechanical stopper to prevent sensor-breakdown

With the optional software Force Logger Plus up to 4 sensors can be connected simultaneously for data processing to a PC

Manufacturers calibration report is included

Display can be reversed for inverted use; e. g. on vertical test stand

Standard Features


Force measuring device for exact measuring with an accuracy of ±0.2 % full scale ±1 digit

Overload protection:
200 % full scale

For hand-held use or mounting on test stand (mounting thread 4 x M4 in back)

Easy to operate

Force gauge RDSV-1000N with easy to read LCD display

Ergonomically-designed, rugged die-cast aluminium housing

Operates on rechargeable battery (NiMH) and/or AC adapter

Full set of accessories included

Can be used for various parts of body and items on different measurement condition, by changing the attachment

Available models

ModelMeasuring RangeResolutionInterfaces
RDSV-1000N0 – 1000 N1 NUSB and RS-232
alternative
RZTA-1000N0 – 1000 N1 NUSB, RS-232, Digimatic and analogmore
RFB-750N0 – 750 N7.5 Nnonemore
Specifications

Measuring principle:Bidirectional force sensor with strain gauge
Accuracy:±0.2 % Full Scale ±1 digit
Measuring units:N, gf (kgf), lbf (ozf)
Display:LCD, 4 digits
Overload capacity:200 % full scale,
Alarm signal at 90 % full scale,
Alarm signal and flashing display at 110 % full scale
Display update rate:8 times/sec.
Plug gauge:M6 male thread
Memory:Internal memory for 1000 readings
Sampling rate:1000 times/sec
Zero adjustment:10 % full scale
A/D converter:16 bit
Output signal:USB,
RS-232 (8, 1, N, 19200),
Temperature range:0 – 40 °C
Air humidity:20 – 80 % RH
Low battery indicator:Display flashes
Power supply:Rechargeable NiMH batteries (approx. 30 h continuous use without background light, approx. 14 h with background light,
approx. 4.5 h charging time). Charging occurs with AC adapter or by connection via USB cable to a PC or a mobile battery.
Mounting threads
for test stand:		4 x M4, Depth 8 mm
Housing material:Die-cast aluminium
Dimensions:
Handle:		181 x 72 x 32 mm (LxWxH)
144 x 290 x 41 (LxWxH)
Weight, net (gross):
Handle:		Approx. 460 g (2500 g)
approx. 600 g

Specifications subject to change without notice!

Standard Accessories

  1. Force Logger

    Force Logger - software for force gauges of ZT, DSV and DST seriesUSB cable approx. 1.5 m long, CD-ROM with USB-driver and software ” Force Logger” for data transfer and data evaluation on PC.


  2. FOH-1 - Handle

    FOH-1 handle for easier use of force gaugesFor easy use the force gauge RDS-1000N can be equipped with a handle. Therefore especially higher forces can be measured more easily.
    Order number: FOH-1


  3. MED-R80 - Curved Pad

    MED-R80 curved pad for measuring arms and legsApplicable for measuring arms and legs.
    Working face 100 x 25 mm, Radius 80 mm
    Order number: MED-R80


  4. MED-100-25 - Rectangular Pad

    MED-100-25 rectangular pad for measuring arms and legsApplicable for measuring arms and legs.
    Working face 100 x 25 mm
    Order number: MED-100-25


  5. MED-25-25 - Square Pad

    MED-25-25 square pad for measuring the tongueApplicable for measuring the tongue.
    Working face 25 x 25 mm
    Order number: MED-25-25


  6. MED-D80 - Circular Pad

    MED-D80 circular pad for measuring the backApplicable for measuring the back.
    Working face Ø 80 mm
    Order number: MED-D80


  7. S-7 - Large Hook

    A-7 large hook for force gaugesApplicable for doors, carts, wagons and so on.
    Order number: S-7


  8. S-8 - Y-Hook

    A-8 y-hook for force gaugesApplicable for doors, carts, wagons and so on.
    Order number: S-8


  9. ADU-230 - AC Adapter

    ADU-230 AC adapter for force gauges DST and DSVFor 100 – 240 V AC
    Order number: ADU-230


  10. Inspection Certificate

    Manufacturers inspection certificate of Imada Co., Ltd.Delivery includes a manufacturers inspection certificate free of charge

    Inspection Certificate


Accessories (optional)

  1. SW12 - Z-LINK4

    SW-12 software ZLink4 for force gauges DST and DSV

    ZLINK4 Info (PDF)

    Software for Data acquisition by USB output:
    – force-time graphs
    – determine time period for recording
    – display the actual reading
    – sampling rate 50 readings per second
    – storage of all measured values as CSV,
    Requirements: Microsoft Windows 8.1/10/11
    Order number: SW-12


  2. 40016I - Accumulator

    40016I NiMH spare accumulator for force gauges DST and DSVNickel metal hydride accumulator, 2-pole connector
    4.8 V, 800 mAh
    Order number: 40016I


Calibration Report

Kalibrierzeugnis-Calibration Certificate Hans Schmidt GmbHCalibration Certificate
including a calibration report is optional available.

 

Calibration Certificate (PDF)
Dimensions

Dimensions of force gauge RDSV-1000N for download.
Drawing (PDF)
Delivery Includes

Scope of delivery force gauge RDSV-1000NForce gauge RDSV-1000N with carrying case, 6 inserts, handle, AC-adapter, manufacturers inspection certificate and operation instruction in English

If you want to get a quote or want to place an order, please contact us!


+49 (0)8638 9410-0

+49 (0)8638 4825


Contact us
Print page Print page