Thickness gauge to determine the thickness of leather, textiles, cardboard, felt, rubber, sheet metal, foil, plywood, plastic, foams and more
Self closing thickness gauge with high accuracy and resolution
| Model | Measuring Range | Resolution | Depth of Jaw | |
| DMD-830-1-F | 25 mm 1 inch | 0.01 mm 0.0005 inch | 300 mm | |
| alternative | ||||
| DMD-3 | 10 mm 0.4 inch | 0.01 mm 0.0005 inch | 50 mm | more |
| DMD-3-1 | 25 mm 1 inch | 0.01 mm 0.0005 inch | 50 mm | more |
| DMD-820 | 10 mm 0.4 inch | 0.01 mm 0.0005 inch | 200 mm | more |
| DMD-820-1 | 25 mm 1 inch | 0.01 mm 0.0005 inch | 200 mm | more |
| DMD-830F | 10 mm 0.4 inch | 0.01 mm 0.0005 inch | 300 mm | more |
| DMD-850-F | 10 mm 0.4 inch | 0.01 mm 0.0005 inch | 500 mm | more |
| DMD-850-1-F | 25 mm 1 inch | 0.01 mm 0.0005 inch | 500 mm | more |
To order, please indicate the desired feeler, e.g. DMD-830-1-F-B for gauge with feeler “B”
Thickness gauge DMD-830-1-F can optionally be equipped with an additional weight, to achieve a measuring pressure according international standards:
DD-300-T Code E for DIN EN ISO 5084 (textiles)
DD-300-V Code E for DIN EN ISO 9073-2 (standard fleece)
DD-300-L Code E for DIN 2589 (leather)
| Resolution: | 0.01 mm / 0.0005 inch |
| Measuring range: | 0 – 25 mm / 1 inch |
| Depth of jaw: | 300 mm |
| Measuring pressure: | 2 N |
| Measuring principle: | Self closing |
| Feeler shape: | A/B/C/G/H |
| Display: | LCD 4 digit, 8 mm high |
| Measuring system: | Capacitive |
| Data output: | USB |
| Weight, net (gross): | Approx. 1000 g (1050 g) |
Specifications subject to change without notice!
for rubber, felt*, soft materials*, non wovens* etc., diameter 30 mm
*meets no DIN EN ISO standards
For rubber, felt*, soft materials*, non wovens*, etc.
customized feeler type “A” are available with diameter 31- 56 mm on request at extra charge.
*meets no DIN EN ISO standards
Suitable for rubber, felt*, soft materials*, non wovens*, etc. diameter 20 mm
*meets no DIN EN ISO standard
For soft leather, cardboard, paper, foils, etc., diameter 10 mm
Suitable for sheet metal, etc. radius 1.5 mm
For hard leather, plywood, fiberboard, etc., radius 6 mm
To order, please indicate the desired feeler, e.g. DMD-830-1-F-B for gauge with feeler “B”
The swing-out foot changes the for hand-held use designed thickness gauge DMD-830-1-F for on-table operation. They can be used for a lot of applications.
Software for data transfer, displaying and analysis of measured data on PC
– Actual value
– Average value
– List of all readings
– Maximum
– Minimum
– Data storage in Excel
Order number: SW-53
Data cable USB used for data transfer via USB interface
Order number: 35012W
Thickness gauge DMD-830-1-F with transport packing case
