2 operation modes:
Single or continuous operation for constant test conditions
– manual operation: Feed continuous so long as button is pressed or he limit switch is reached
– continuous cycle operation: Force gauge travels a defined distance continuously up and down
Single or continuous operation for constant test conditions
– manual operation: Feed continuous so long as button is pressed or he limit switch is reached
– continuous cycle operation: Force gauge travels a defined distance continuously up and down
The adjusted speed is indicated in the display
Integrated timer and counter function for accomplishment of endurance tests (To apply constant force for a certain number of strokes and/or at certain time
The display shows the adjusted basic conditions, as well as the executed strokes, respectively the elapsed time.
The display shows the adjusted basic conditions, as well as the executed strokes, respectively the elapsed time.
Test stand MX2-5000N with infinitely adjustable travel speed from 0.5 to 300 mm/min
2 manual adjustable limit switches for inversion of the direction
Gauge overload protection in combination with force gauge ZTS, ZTA or display unit FA Plus only (additional connecting cable is necessary)
3 different speeds adjustable (Start, measuring back)
Travel distance max. 95 – 380 mm (295 – 580 mm with extended stroke), depending on the mounted force gauge (see dimensions)
FSA: In combination with force gauge model ZTA and software »Force Recorder Professional« force-displacement and force-time graphs can be generated
Depending on the application we have a lot of clamping tools and clamps for test stand MX2-500N in our program.
Connecting cable for test stand with force gauge (Series ZT) to stop feed at Fmax or overload (force control), length approx. 1.5 m
Connecting cable for test stand with force gauge (Series Z) to stop at Fmax or overload (force control).