Tension Sensor MAZF and MBZF

3 Tension ranges available
from 0 - 100 cN up to 0 - 500 cN

Online tension sensor for measuring small tensions of threads and fibres up to 500 tex, as well as very thin wires up to 0.2 mm Ø

Compact sensor with two different designs for continuous tension measuring of tensions in textile and fine wire with small guide roller with groove Ø 7.4 mm

Tension meter can be fixed on a mounting rail DIN EN 60715

Categories: Tension Meter, Single Sensors 3 Rollers, Tension of fibers and threads up to 2000 cN, MZ Series, Tension of wires up to 2000 cN, Stationary, electronic, Stationary, electronic, Stationary, electronic, Sewing Machines

Print page

Special Features MAZF

Tension sensor MAZF with integrated measuring amplifier and high accuracy of 2 % FS

Gently material path, it is guide over the rollers

Material incoming / outgoing angle 35° min

Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)

Universal mounting possibility – easy to install, even afterwards, on existing machines:
The sensor can be mounted using the three threads at the underside of the housing body. Alternative it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.

Easy calibration to customized material by operator – zero and gain calibration is required

Measuring principle – load cell with high quality strain gauge bridge

Standarf Features

Supplied with a 3 m shield cable with open Ends (other cable length on request)

Tension sensor with aluminium housing

Certificate of Compliance with the order 2.1 according EN 10204 is included

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special Features MBZF

Tension sensor MBZF with integrated measuring amplifier and high accuracy of 2 % FS

Typical material path – warping the 3 rollers

Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)

Easy calibration to customized material by operator – zero and gain calibration is required

Measuring principle – load cell with high quality strain gauge bridge

Path of the thread tension sensor MBZF

Lern more about the different tension measuring systems

You are not sure, which system is right for, or where the differences are? Here we explain it for you.

Info tension measuring system

Available Models

Model	Model	Tension Range	Measuring Head Width*	Schmidt Calibration Material**
MAZF-100	MBZF-100	0 – 100 cN	70 mm	PA: 0.12 mm Ø
MAZF-200	MBZF-200	0 – 200 cN	70 mm	PA: 0.12 mm Ø
MAZF-500	MBZF-500	0 – 500 cN	70 mm	PA: 0.20 mm Ø

Other measuring units available, such as g.
* Outer dimensions of the housing
** Suitable for 95 % of applications PA = Polyamide Monofilament

For the tension sensor MAZF and MBZF we offer different display units for one or more sensors, as well as strain gauge amplifier.

Find further information at display units and amplifier

Specifications

Calibration:	SCHMIDT factory procedure
Accuracy:	±2 % full scale and ±1 digit Other calibration material: ±3 % full scale or better
Overload protection:	100 % of tension range
Measuring principle:	Strain gauge bridge
Measuring roller deflection:	Max. 0.5 mm
Natural frequency:	Approx. 500 Hz, depending on tension range
Signal processing:	Analog
Temperarture drift:	Better ±0.05 % Full Scale/ºC
Output Signal:	Standard: 0 – 1 V DC (analog) Option: 0 – 10 V DC (analog) or mV/V (DMS)
Output:	Shielded cable (3 m) with open ends
Damping (fg):	Standard (analog): 30 Hz (other values on request)
Temperature range:	10 – 45 ºC
Air humidity:	85 % RH, max.
Power supply:	+15…24 V DC, max. 21 mA regulated Code A10: max. +5 V DC, max. 20 mA regulated
Housing material:	Aluminium
Dimensions:	70 x 63 x 18 mm (LxWxH)
Weight, net (gross):	With cable approx. 200 g (300 g)

Specificatins subject to change without notice!

Guide Rollers

Order-Code	Line Speed v_max.… m/min	Roller Material
Standard	900	Hard-coated aluminium
Code K	2000	Hard-coated aluminium

Accessories (optional)

Code MA - Mounting Adapter
Adapter for mounting the sensor at a DIN EN 60715 DIN rail housing.
The adapter is mounted ex works at the sensor.

K08100 - Mounting Rail
Mounting rail according DIN EN 60715. Length 491 mm.
Several sensors can be mounted easy and quick. It allows multiple sensor mounting adjacent to one another with minimal spacing.
Order number: K08100

Output Signal

Standard

output signal: 0 – 1 V DC

Code A2

output signal: 0 – 10 V DC

Code A10

output signal: mV/V
for sensors without amplifier; incl. firmly connected cable with bare leads, 3 m long

Calibration Report

Inspection Certificate 3.1 according DIN EN 10204
including a calibration report is optional available.

Inspection Certificate 3.1 (PDF)

Spare Rollers

Download an overview for the guide rollers.

Guide Roller Catalogue (PDF)

Dimensions

Dimensions of tension sensor MAZF and MBZF to download.

Drawing (PDF)

Delivery Includes

Tension sensor with transport packaging, connecting cable, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charge

How To Order

To order tension sensor MAZF and MBZF:

Please indicate the complete order number, e. g.:

Model with tension range		Code guide rollers (it not standard)		Code output signal (if not standard)		Complete Order No.
MBZF-500	+	K	+	A2	=	MBZF-500-K-A2

Instruction Manual

Download the instruction manual of tension sensor MAZF and MBZF.

Instruction Manual (PDF)

If you want to get a quote or want to place an order please contact us.

+49 (0)8638 9410-0

+49 (0)8638 4825

[email protected]

Print page

Infos

Infos

Infos

Infos

Infos