TOP
Menu
Home > Tension Meter > Stationary, electronic > Single Sensors 3 Rollers > MZ Series > Tension Sensor MAZD and MBZD

Tension Sensor MAZD and MBZD

3 Tension ranges available
from 0 - 200 cN up to 0 - 1000 cN

Online tension sensor for measuring small tensions of threads and fibres up to 1000 tex, as well as thin wires up to 0.3 mm Ø

Compact sensor with two different designs for continuous tension measuring in wire and textile industry

Tension meter can be fixed on a mounting rail DIN EN 60715

Categories: , , , , , , , ,
Print page Print page

Special Features MAZD


Tension sensor MAZD with integrated measuring amplifier and high accuracy of 2 % FS

gently material path, it is guide over the rollers

Material incoming / outgoing angle 35° min

Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)

Universal mounting possibility – easy to install, even afterwards, on existing machines:
The sensor can be mounted using the three threads at the underside of the housing body. Alternative it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
Easy calibration to customized material by operator – zero and gain calibration is required

Measuring principle – loadcell with high quality strain gauge bridge

Standard Features


Tension sensor with aluminium housing

Certificate of Compliance with the order 2.1 according EN 10204 is included

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Path of the thread tension sensor MAZD

Special Features MBZD


Tension sensor MBZD with integrated measuring amplifier and high accuracy of 2 % FS

Typical material path – warping the 3 rollers

Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)

Universal mounting possibility – easy to install, even afterwards, on existing machines:
The sensor can be mounted using the three threads at the underside of the housing body. Alternative it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.

Easy calibration to customized material by operator – zero and gain calibration is required

Measuring principle – loadcell with high quality strain gauge bridge

Path of the thread tension sensor MBZD

Lern more about the different tension measuring systems

You are not sure, which system is right for, or where the differences are? Here we explain it for you.

Info tension measuring systems

Available Models

ModelModelTension Range
Measuring Head Width*
Schmidt Calibration Material**
MAZD-200MBZD-2000 – 200 cN70 mmPA: 0.12 mm Ø
MAZD-500MBZD-5000 – 500 cN70 mmPA: 0.20 mm Ø
MAZD-1000MBZD-10000 – 1000 cN70 mmPA: 0.30 mm Ø
A connecting cable is not included and has to be ordered sperately.
Other measuring units available, such as g.
* Outer dimensions of the housing
** Suitable for 95 % of applications PA = Polyamide Monofilament

Anzeige SC-PM und Vorverstärker SCV-1For the tension sensor MAZD and MBZD we offer different display units for one or more sensors, as well as strain gauge amplifier.

Find further information at display units and amplifier

Specifications

Calibration:SCHMIDT factory procedure
Accuracy:±2 % full scale and ±1 digit
Other calibration material:
±3 % full scale or better
Overload protection:100 % of tension range
Measuring principle:Strain gauge bridge
Measuring roller deflection:Max. 0.5 mm
Signal processing:Analog
Temperarture drift:Better ±0.05 % Full Scale/ºC
Output Signal:Standard: 0 – 1 V DC (analog)
Option: 0 – 10 V DC (analog)
Damping (fg):Standard (analog): 30 Hz (other values on request)
Temperature range:10 – 45 ºC
Air humidity:85 % RH, max.
Power supply:+15…24 V DC, max. 21 mA regulated
Housing material:Aluminium
Dimensions:78 x 63 x 18 mm (LxWxH)
Weight, net (gross):Approx. 180 g (280 g)

Specifications subject to change without notice!

Guide Rollers

Order-CodeLine Speed vmax. … m/minRoller Material
Standard
2000Hard-coated aluminium
Code K
3500Hard-coated aluminium
Code H
5000Plasma-coated aluminium
Code CE2
1000Ceramic-coated aluminium

Accessories (optional)

  1. E10071 - M9 Sub-Miniatur Plug

    E10071 M9 sub-miniatur plug for tension sensors of FS and MZ series

    Plug suitable for sensors of MZ series,
    cable outlet 3.5 – 5 mm
    Order number: E10071


  2. E10070 - M9 Sub-Miniatur Right Angle Plug

    E10070 M9 sub-miniatur right angle plug for tension sensors of FS and MZ series

    Plug suitable for sensors of MZ series,
    cable outlet 3.5 – 5 mm
    Order number: E10070


  3. EK0620, EK0621 and EK0627 - Connecting Cable with M9 Sub-Miniatur Plug and Open Ends

    EK0620 connecting cable with M9 sub-miniatur plug and open ends

    Connecting cable for an analog output.
    For connecting tension sensors MAZD and MBZD to the display unit SC-PM.
    Order number: EK0620, Length 2 m
    Order number: EK0621, Length 5 m
    Order number: EK0627, Length 10 m

    Other cable length available on request!


  4. EK0622 and EK0623 - Connecting Cable with M9 Sub-Miniatur Right Angle Plug and Open Ends

    EK0622 connecting cable with sub-miniatur right angle plug and open ends

    Connecting cable for an analog output.
    For connecting tension sensors MAZD and MBZD to the display unit SC-PM.
    Order number: EK0622, Length 2 m
    Order number: EK0623, Length 5 m


  5. EK0624 - Connecting Cable with M9 Sub-Miniatur Plug and Diode Plug

    EK0624 connecting cable with M9 sub-miniatur plug and diode plug

    Connecting cable for analog output.
    For connecting tension sensors MAZD and MBZD to the display unit SCD-1.
    Order number: EK0624, Length 2 m

  6. Code MA - Mounting Adapter

    Code MA mounting adapter attached at the tension sensor MAZD

    Adapter for mounting the sensor at a DIN EN 60715 DIN rail housing.
    The adapter is mounted ex works at the sensor.


  7. K08100 - Mounting Rail

    K08100 mounting rail according to DIN EN 60715

    Mounting rail according DIN EN 60715. Length 491 mm.
    Several sensors can be mounted quick and easy next to each other on the mounting rail to minimize space requirements.

    Order number: K08100


Output Signal

Standard

Standard

output signal: 0 – 1 V DC

Code A2

Code A2

output signal: 0 – 10 V DC


Calibration Report

Abnahmeprüfzeugnis-Inspection Certificate Hans Schmidt GmbHInspection Certificate 3.1 according DIN EN 10204
including a calibration report is optional available.

 

Inspection Certificate 3.1 (PDF)
Spare Roller

Title guide roller catalogueDownload an overview for the guide rollers.

 

Guide Roller Catalogue (PDF)
Dimensions

Dimensions of tension sensor MAZD and MBZD to download.
Drawing (PDF)
Delivery Includes

Tension sensor with transport packaging, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charges

How To Order

To order tension sensor MAZD and MBZD:

Please indicate the complete order number, e. g.:

Model with tension rangeCode guide rollers (if not standard)Code output signal (if not standard)Complete Order No.
MBZD-500+K+A2=MBZD-500-K-A2

Instruction Manual

Download the instruction manual of tension sensor MAZD and MBZD.
Instruction Manual (PDF)

If you want to get a quote or want to place an order please contact us.


+49 (0)8638 9410-0

+49 (0)8638 4825


Contact us
Print page Print page