Tension Meter ETPB and ETPX

3 Tension ranges available
from 0.3 - 100.0 cN up to 2.0 - 500.0 cN

For fibers up to 500 tex

Electronic tension meter for hard to reach and limited access space applications.
2 designs available: ETPB (Basic unit) and ETPX (with memory and outputs)

Hand-held instrument with ceramic pins up to max. 6000 m/min

Tension meter with measuring head as small as possible for textile applications only

Categories: Tension Meter, Hand-Held, electronic, ET Series, Hand-Held, electronic, Winding machines

Print page

Special Features

Tension meter ETPB and ETPX with ceramic pins mounted on long shafts to reach into tightest places

Hand-held instrument with non-rotating ceramic pins (outer pins V-grooved) for line speed max. 6000 m/min, for line speed up to max. 2000 m/min model ETB or model ETX may be used

Coloured, backlight TFT display with 3 different display modes
– numeric
– numeric with live bargraph
– numeric with graph (time-tension)

The display rotates in 90° steps for better reading

Automatic “Zero-Setting” in each measuring position using a special sensor technique

Selectable units of measurement: cN, g, N and lb

Very high data sampling rate (internal 1 kHz)

Storage of MIN, MAX, last reading, average and standard deviation per measuring interval

User-set MIN and MAX alarms with indication of TFT display if reading is out of limits

Adjustable electronic damping for better reading when tension fluctuates

3 separate calibration material memory locations for custom calibrations

Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material

Menu set-up in English or German language

Standard Features

Rugged aluminium housing

LiPo accumulator (approx. 20 hours continuous operation) with AC adapter

CE certified, interference resistant against static electrifications

Certificate of Compliance with the order 2.1 according EN 10204 is included

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Additional Special Features ETPX

The tension meter ETPX can be connected to a PC using the USB interface to monitor readings constantly on a PC

Memory for 60.000 readings

5 different memory modes can be selected by the operator:

Mode S: only statistical values per series are displayed
Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement
Mode C: continuous logging over a user set time and max. 999 series of measurement (2 Hz)
Mode F: as C with higher sampling rate (200 Hz)
Mode D: storage of single readings and statistic

besonderheiten-pc-verbindung Model ETPX can be connected to a PC with the USB cable. With the software SW-TI3 »Tension Inspect 3« readings can be displayed, statistically analyzed and saved. For more information see “Standard Accessories ETPX”

Available Models

Model	Model	Measuring Range	Resolution	Measuring Head Width*	SCHMIDT Calibration Material**
ETPB-100	ETPX-100	0.3 – 100.0 cN	0.1 cN	22 mm	PA: 0.20 mm Ø
ETPB-200	ETPX-200	2.0 – 200.0 cN	0.1 cN	22 mm	PA: 0.20 mm Ø
ETPB-500	ETPX-500	2.0 – 500.0 cN	0.1 cN	22 mm	PA: 0.20 mm Ø

* Outer distance between outside guide rollers
** Suitable for 95 % of applications – PA = Polyamid-Monofile, calibrated with a running filament approx. 60 m/min

Specifications

Calibration:	According SCHMIDT factory procedure
Accuracy:	±1 % full scale ±1 digit or better (typical ±0.5 % full scale)
Measuring units:	cN, g, N or lb, switchable
Overrange:	Approx. 10 % full scale, without accuracy guarantee
Overload protection:	200 % full scale
Measuring principle:	Strain gauge bridge
Measuring roller deflection:	Max. 0.5 mm
Signal processing:	Digital
Damping:	Adjustable electronic damping, averaging
Sampling rate internal:	approx. 1 kHz
Sampling rate:	200 Hz, 2 Hz: AVG, MIN, MAX
Display:	Colour-TFT 128 x 160
Display update rate:	Approx. 2 times per second
Memory:	Last, average, MAX and MIN
Temperature coefficient:	Gain: less than ± 0.01% full scale/°C
Temperature range:	10 – 45 ºC
Air humidity:	85 % RH, max.
Auto power off:	Approx. after 3 minutes of non-use
Power supply:	LiPo accumulator (approx. 20 h continuous use, charging time approx. 3.5 h), USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ)
Housing material:	Aluminium
Dimensions:	See dimensions
Weight, net (gross):	Approx. 310 g (1220 g)

Additional specifications of model ETX

Output signal:	USB
Memory:	Max. 60000 at 999 measuring periods
Memory Modes:	5 memory modes with statistical evaluation and PEAK capture

Specifications subject to change without notice!

Guide Pins

Order-Code	Line Speed v_max.… m/min	Roller Material
Standard	6000	Aluminium-oxid ceramic

Standard Accessories ETB

K50202 - USB AC Adapter
USB AC adapter with 4 adapters (EU/USA/UK/AUS-NZ) for 100 – 240 V AC and USB cable for loading the accumulator
Order number: K50202

Standard Accessories ETPX

SW-TI3 - Software Tension Inspect 3
Tension Inspect 3 Infos (PDF)
Software to display and save readings on a PC (Win 7 and higher; 32 bit and 64 bit)
Features:
– Real-time reading
– The readings are also shown in a X-Y- diagram (time/date-tension)
– For data analysing the buffered diagram can be zoomed and scaled
– Recording of the buffered readings as CSV-file (on user request)
– Download of values to Excel
Order number: SW-TI3

K50202 - USB AC Adapter
USB AC adapter with 4 adapters (EU/USA/UK/AUS-NZ) for 100 – 240 V AC and USB cable for loading the accumulator and data transfer to a PC.
Order number: K50202