Shore Durometer SHTD
Durometer according to Shore for determining the indentation hardness of hard rubber, rigid thermoplast, resopal, hard plastic materials
Shore D hardness tester according DIN 53505, ISO 48-4, ISO 868 and ASTM D 2240
Compact durometer for fast measurements
Special Features
Standard Features
Available Models
Model | Shore | Application | |
SHTD | Shore D | plastic and medium hard to hard rubber materials | |
alternative | |||
SHTA | Shore A | soft rubber, elastomers, natural rubber, soft PVC, leather, etc. | more |
Indentor: | Tapered pin 30°, Ø 1.25 mm |
Depth of indentation: | 0 – 2.5 mm |
Typical applications: | Hard rubber, rigid thermoplast, resopal, hard plastic materials |
Accuracy: | ± 1 hardness unit |
Application range: | 10 – 90 Shore D |
Standard: | DIN 53505, ISO 48-4, ISO 868, ASTM D 2240 |
Measuring spring force: | …4.45 – 44.5 N |
Display range: | 0 – 100 Shore D units |
Scale diameter: | 54 mm |
Working face: | 18 mm Ø |
Base plate: | 24 mm Ø |
Weight, net (gross): | Approx. 200 g (300 g) |
Dimensions: | 28 x 58 x 110 mm (LxWxH) |
Specifications subject to change without notice!
General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units. As the depth of indentation is max. 2.5 mm the test material has to have a minimum thickness of 6 mm. If thickness is less stack some samples till you reach the required thickness.
- Code M - Memory pointer
Memory pointer to capture and store value (last or highest reading) during measuring.
Order code: SHTA-M - HP-P20-100 - Control Rings for 20, 40, 60 and 80 Shore
To determine the displacement at 20, 40, 60 and 80 Shore.
Includes a base disk as basis for the control rings and an inspection certificate.
Order number: HP-P20-100 - Calibration Certificate
Calibration certificate with calibration report is optional available.