Shore Durometer SHTA
Durometer according to Shore for determining the indentation hardness of soft rubber, elastomers, natural rubber, polyester, soft PVC, leather, etc.
Shore A hardness tester according DIN 53505, ISO 7619, ISO 868 and ASTM D 2240
Compact durometer for fast measurements
|Indentor:||Cone 35°, Ø 1.25 mm|
|Depth of indentation:||0 – 2.5 mm|
|Typical applications:||Soft rubber, elastomers, natural rubber, soft PVC, leather, etc.|
|Accuracy:||± 1 hardness unit|
|Application range:||10 – 90 Shore A Units|
|Standard:||DIN 53505, ISO 7619, ISO 868, ASTM D 2240|
|Measuring spring force:||0.55 – 8.065 N|
|Test pressure*:||Approx. 12.5 N|
|Display range:||0 – 100 Shore A units|
|Scale diameter:||54 mm|
|Working face:||18 mm Ø|
|Housing diameter:||24 mm Ø|
|Weight, net (gross):||Approx. 200 g (approx. 300 g)|
|Dimensions:||28 x 58 x 110 mm (LxWxH)|
Specifications subject to change without notice!
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units. As the depth of indentation is max. 2.5 mm the test material has to have a minimum thickness of 6 mm. If thickness is less stack some samples till you reach the required thickness.
- Memory pointer Code M
Memory pointer to capture and store value (last or highest reading) during measuring.
Order code: SHTA-M
- Control Ring for 20 Shore
To determine the displacement at 20 Shore.
Order number: HP-P20
- Control Rings for 20, 40, 60 and 80 Shore
To determine the displacement at 20, 40, 60 and 80 Shore.
Includes a base disk as basis for the control rings and an inspection certificate.
Order number: HP-P20-100
- Calibration Certificate
Calibration certificate with calibration report is optional available.