TOP
Menu
Home > Force Gauge and Test Stands > Force Gauges > Digital Force Gauges with outputs > Door Tester Unit ZTS-RDM-2000N

Door Tester Unit ZTS-RDM-2000N

Measuring range 0 - 2000 N

Digital force gauge for determination of closing forces of automatic doors according DIN EN 12445, DIN EN 12650 and JISA4721

High quality force measuring unit with interface (RS-232, analog and USB). This device has a fast measuring frequency for exact acquisition of peak values.

Force gauge with separate remote load sensor

CE mark
Categories: , ,
Print page Print page

Special Features


2 operation modes:
real time – display the actual tension or compression force
peak force – to measure the peak force during a test

Door Tester Unit ZTS-RDM-2000N with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values

Display update time 16 times/sec

Easy to read display (OLED)

The header and footer of the display can be customized, as well as switched on and off

Programmable high/low set-points for go/no-go testing:
with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs

Storage of 1000 values, which can be recalled:
– on the display
– data transfer to a PC
– for printing with report

Output signal:
– RS-232 for connecting to a PC
– USB
– analog ±2 V DC

Display can be reversed for inverted use; e. g. on vertical test stand

»Zero Set« to zero the gauge in all operating positions

Door Tester Unit ZTS-RDM-2000N with separate remote load sensor

Force gauge with user switchable units: N, kgf (gf) und lbf (ozf)

Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)

Manufacturers inspection certificate is included

Standard Features


Easy to change extension shaft

Door Tester Unit ZTS-RDM-2000N for exact measuring with an accuracy of 0.2 %

200 % overload protection

Ergonomically-designed, rugged die-cast aluminium housing

Non-slip rubber grip

Operates on rechargeable battery and/or AC adapter

Available Models

ModelMeasuring rangeDescription
ZTS-RDM-2000N0 – 2.000 NIndicator, load cell, extension shafts,
spacer handle and Software
ZTS-DM-2000N0 – 2.000 NIndicator and load cell

The accuracy of the load cell can only be assured, by using with the force gauge, the load cell is adjusted for.

Specifications

Measuring range:2000 N
Measuring principle:Bidirectional force sensor with strain gauge
Displacement:Max. 5 mm, 500 N per mm, ±1 digit
Extension shift:200, 300 and 500 mm
Sampling rate: 2000 times/sec
Accuracy:±2 % full scale ±1 digit
A/D converter:24 bit
Measuring units:N, gf (kgf), ozf (lbf) selectable
Display:4 digit, 14 mm high
Overload capacity:200 % full scale,
symbol flashes at 110 % full scale
Zero adjustment:10 % full scale
Memory:Flash memory of max. 1000 values
recallable peak – tension/compression force
Setpoints:Programmable Max/Min setpoints with colour-coded indicators in the LED display
Output signal:RS-232 (8, 1, N, 19200),
analog ±2 V DC,
USB
Temperature range:5 – 45 °C
Air humidity:85 % RH, max.
Low battery indicator:Display flashes
Power supply:Rechargeable NiMH batteries (approx. 6.5 h continuous use,
approx. 2 h charging time) and/or 100 – 240 V AC adapter and two adapters (EU/USA)
Mounting threads for test stand:4 x M4, Depth 5 mm
Housing material:Indicator: Die-cast aluminium
Load cell: Hardened aluminium
Dimensions:Indicator: 191 x 75 x 34 mm (LxWxH)
Load cell: 380 x 94 x 66 (LxWxH)
Weight, net (gross):Indicator: approx. 490 g (1380 g)
Load cell: 1200 g (1400 g)

Specifications subject to change without notice!

Standard Accessories

  1. DM-2000N - Load Cell

    Load cell according to DIN EN 12445, DIN EN 12650 and JIS A4721
    Order number: DM-2000N


  2. Force-Logger

    Software Force LoggerUSB cable approx. 1.5 m long, CD-ROM with USB-driver and software “Force-Logger” for data transfer


  3. ADW-6010 - AC Adapter

    AC-adapter ADW-6010AC adapter for 100 – 240 V AC
    Order number: ADW-6010


  4. Inspection Certificate

    Inspection Certificate

    Delivery includes a manufacturers inspection certificate free of charge

    Inspection Certificate


Additional Standard Accessories ZTS-RDM-2000N

  1. SW-22 - Force Recorder Standard

    Force Recorder Standard

    Force Recorder Standard Info (PDF)

    Additional functions in comparison to Force Recorder Light:
    5 graphs at maximum can be displayed in a table
    Requirements: Microsoft Windows 8.1/10/11
    Order number: SW-22


  2. DM-ETM-500 - Extension Shaft

    Extension shaft DM-ETM-200Extension shaft for measuring forces at a closing positions of 500 mm.
    Length 500 mm
    Order number: DM-ETM-500


  3. DM-ETM-300 - Extension Shaft

    Extension shaft DM-ETM-200Extension shaft for measuring forces at a closing positions of 300 mm.
    Length 300 mm
    Order number: DM-ETM-300


  4. DM-ETM-200 - Extension Shaft

    Extension shaft DM-ETM-200Extension shaft for measuring forces at a closing positions of 200 mm.
    Length 200 mm
    Order number: DM-ETM-200


  5. DM-ETM-001 - Spacer Handle

    Space handle for easy positioning the load cell during measuring with the extension shaft
    Order number: DM-ETM-001


Accessories (optional)

  1. CB-108 - Connecting Cable analog

    Connecting cable for alalog output CB-108Connecting cable for analog output, for connection to a line recorder.
    Length approx. 3 m
    Order number: CB-108


  2. CB-208 - Connecting Cable RS-232

    Connecting cable for CB-208Connecting cable for RS-232 output with sub D 9 female, for connection to PC.
    Length approx. 3 m
    Order number: CB-208


  3. DP-308 - Accumulator

    Accumulator DP-308Nickel metal hydride accumulator, 2-pole connector
    3.6 V, 1300 mAh
    Order number: DP-308


  4. Calibration Certificate

    Calibration Report

    Calibration certificate with calibration report is optional available.


Dimensions

Here you can find the dimensions of door tester unit ZTS-RDM-2000N for download .
Dimensions (PDF)
Delivery Includes

Scope of delivery ZTS-RDM-2000NIndicator with carrying case and separate force sensor, AC adapter, USB connecting cable, CD-ROM with USB-driver, simple software for data transfer, manufacturer`s calibration report, operating instruction in English.
Additional for model ZTS-RDM-2000N
Software Force Recorder Standard, 3 extension shafts (200, 300, 500 mm) and spacer handle

If you want to get a quote or want to place an order, please contact us!

+49 (0)8638 9410-0
+49 (0)8638 4825
Contact us
Print page Print page