- Deutsch

Wire Speed and Length Meter YS-TR

Combined hand-held tachometer:
- speed and length meter for welding wires and similar materials
- hand-held tachometer for contact and non-contact measurement e.g engine shafts

Tachometer with LCD display and 7 selectable measuring units

Suitable for Welding wire diameter 0.3 to 3 mm

Categories: Yarn Speed and Length Meter, Tachometer, Speed and Length Meter

Print page

Special Features

The wire speed and length meter YS-TR combines the function of four separate instruments in one:
– Speed and length meter for welding wires
– contact measuring of revolutions
– contact measuring of velocity of rotation
– non-contact measuring of revolutions

2 Slide-in measuring adapters for yarn speed and length meter YS-20 make it simple to convert from contact to non-contact or to speed and length measurement

User-selected units
Linear Speed: meters/min, feet/min, inches/min
Length: meters, feet, inches
Revolutions: rpm

the measurement is carried out, as long as the measuring key is pressed

Tachometer with big, easy to ready LCD display

Electricity saving electronic assures a long battery durability

Built-in memory for minimum, maximum and last values

Standard Features

Easy to use

Wire speed and length meter YS-TR with rugged plastic housing with rubber sheathing for firm and safe handling

Easy to read display

Available Models

Model	Application
YS-TR	speed and length meter as well as hand-held tachometer

Specifications
Standard Zubehör
Spare Parts
Delivery Includes

Specifications

Measuring ranges:	wire speed measurement 0.10 … 1999 m/min 0.40 … 6550 ft/min 4.00 … 78700 in/min 0.10 … 33.30 m/sec 0.10 … 109 ft/sec wire length measurement 0.00 … 99999 m 0.00 … 99999 ft 0.00 … 99999 in Revolution measurement Non-contact measurement: 1.00 … 99999 rpm Contact measurement: 0.10 … 19999 rpm
Accuracy:	±0.2 % of displayed value ±1digit
Measuring units:	Speed: m/min, ft/min, in/min, m/sec, ft/sec Length: m, ft, in Revolutions: rpm
Display:	5 digit LCD, 10 mm high – floating decimal point
Measuring system:	Speed/Length: Slide-on measuring head for welding wires Non-Contact Tachometer: Visible LED light beam Contact Tachometer: Slide-on measuring head with cone tip and surface speed wheel (10 cm circumference)
Diameter:	0.8 – 3 mm
Memory:	MIN, MAX, last reading, all retained in memory for the life of batteries
Sensing distance:	Max. 600 mm
Display update time:	1 sec
Auto Power Off:	After 30 s of non-use
Temperature range:	5 – 45 °C
Air humidity:	85 % RH, max.
Power supply:	Batteries 2 x 1.5 V type AA (approx. 20 h continuous use)
Housing material:	ABS plastic
Dimensions:	145 x 60 x 30 mm (LxWxH)
Weight, net (gross):	Approx. 150 g (700 g)

Specifications subject to change without notice!

Standard Zubehör

99901R - Rubber Tip
For contact measurement of revolutions (rpm)
Order number: 99901R

10004R - Funnel
For contact measurement of revolutions (rpm)
Order number: 10004R

10003R - Extension
100 mm long
Order number: 10003R

10001S - Rubber Measuring Wheel with 10 cm circumference
for measurement of line speed
Order number: 10001S

10002S - Rubber Measuring Wheel with 6 Inch circumference
for measurement of line speed
Order number: 10002S

YS-W - Wire Measuring Adapter
Adapter with two rollers for measuring speed and length of welding wire etc. (max. 0.8 – 3 mm Ø). The material runs without bending between the rollers.
Order number: YS-W