3 operation modes:
Single or continuous operation for constant testing conditions
– manual operation: Feed continuous so long as button is pressed or he limit switch is reached
– single cycle operation: The force gauge covers a defined distance for one-time
– continuous cycle operation: Force gauge travels a defined distance continuously up and down
Single or continuous operation for constant testing conditions
– manual operation: Feed continuous so long as button is pressed or he limit switch is reached
– single cycle operation: The force gauge covers a defined distance for one-time
– continuous cycle operation: Force gauge travels a defined distance continuously up and down
Test stand MX-1000N with infinitely adjustable travel speed from 8 to 240 mm/min
Combination of linear guide and high performance brushless motor provides extremely smooth operation also under heavy load
2 manual adjustable limit switches for inversion of the direction
High speed for returning to starting position
Gauge overload protection in combination with force gauge ZTS, ZTA or display unit FA Plus only (additional connecting cable is necessary)
Travel distance max. 430 mm (680 mm with extended stroke), depending on the mounted force gauge (see dimensions)
Connecting cable for test stand MX-500N with force gauge (series Z) to stop feed at Fmax or overload (force control)
Connecting cable for test stand with force gauge (Series Z) to stop feed at Fmax or overload (force control) and output signal RS 232
Connecting cable for test stand with force gauge (Series ZT) to stop feed at Fmax or overload (force control). Length approx. 1.5 m
For exact determination of the travel distance, test stand MX-1000N can be equipped with a digital measuring system:
The test stand may be equipped with a display. Therefore the actual travel speed and distance can be displayed. A Output signal is not available.