3 operation modes:
Single or continuous operation for constant test conditions
– manual operation: Feed continuous so long as button is pressed or he limit switch is reached
– single cycle operation: The force gauge covers a defined distance for one time
– continuous cycle operation: Force gauge travels a defined distance continuously up and down
Single or continuous operation for constant test conditions
– manual operation: Feed continuous so long as button is pressed or he limit switch is reached
– single cycle operation: The force gauge covers a defined distance for one time
– continuous cycle operation: Force gauge travels a defined distance continuously up and down
Test stand MH-1000N with infinitely adjustable travel speed from 6 to 180 mm/min
2 manual adjustable limit switches for inversion of the direction
Gauge overload protection in combination with force gauge ZTS, ZTA or display unit FA Plus2 only (additional connecting cable is necessary)
Travel distance 300 mm, depending on the mounted force gauge
Depending on the application we have a lot of clamping tools and clamps for test stand MH-1000N in our program.
Connecting cable for test stand MH-1000N with force gauge (series Z) to stop feed at Fmax or overload (force control)
Connecting cable for test stand with force gauge (Series Z) to stop feed at Fmax or overload (force control) and output signal RS-232
Connecting cable for for test stand with force gauge (Series ZT) to stop feed at Fmax or overload (force control). Length approx. 1.5 m
For exact determination of the travel distance, test stand MH-1000N can be equipped with a digital measuring system:
The test stand may be equipped with a display. Therefore the actual travel speed and distance can be displayed. A Output signal is not available.