TOP
Menu

Test Stand IPTS

max. capacity 5 N, 20 N oder 50 N

Test stand for measuring peeling force of SMD-packages, emboss tapes, adhesive films, stickers, protection foils, first-aid tapes etc. with high sampling rate based on different standards:

IPTS-5N : IEC 60286-3:2013 and JIS C0806-3:2014

IPTS-20N/-50N : ISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 and JIS K6854-2:1999

Desktop-device with integrated load cell and digital output signal for data processing with a PC

CE mark

Special Features


2 operation modes:
real time – display the actual peeling strength
peak force – to measure the peak force during a test

High sampling rate of 2000 times/sec

Easy to read OLED display

Infinitely adjustable peeling angle 165 – 180 degree

5 adjustable travel speeds: 120, 200, 300, 500, 1000 and 1500 mm/min

Test stand IPTS has an adjustable setting screw to define stroke

Well mounted carriage: Low  mechanical vibration during measurements (0.1 % FS under condition of no attachment and load)

Programmable high/low set-points for go/no-go testing:
with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG)

USB output signal for fast data transfer to a PC (2000 values/sec.)

Special software Force Recorder Standard for recording load curve and readings

Standard Features


User switchable units: N, gf,  and ozf

Display update time 10 times/sec

Exact measuring with an accuracy of 0.2 %

»Zero Set« to zero the gauge (weight compensation for clamp)

Overload stop function (150 % full scale) to decrease the damage of the sensor

Immediately aborting the measurement by emergency switch

Mains operation

Available Models

ModelCapacity
in N
ResolutionCapacity
in gf; kgf
Capacity
in ozf; lbf
Standards
IPTS-5N0 – 5 N0.001 N0 – 500.0 gf0 – 18.00 ozfIEC 60286-3:2013 and JIS C0806-3:2014
IPTS-20N0 – 20 N0.01 N0 – 2.000 kgf0 – 4.409 lbfISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 and JIS K6854-2:1999
IPTS-50N0 – 50 N0.01 N0 – 5.000 kgf0 – 11.02 lbfISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 and JIS K6854-2:1999

 

Specifications

Capacity:Max. 5 N, 20 N or 50 N
Resolution:0.001 N
Accuracy:±0.2 % Full Scale, ±1 digit
Stroke:Travel distance of load cell: approx. 400 mm
Peeling length: approx. 200 mm
mechanical adjustable set points with stop function
Width of adherend:Max. 88 mm
Sample width:IPTS-5 N: clamp for pull 40 mm, clamp for hold 95 mm
IPTS-20N/IPTS-50N: clamp for pull 20 mm, clamp for hold 50 mm
Opening width:IPTS-5 N: clamp for pull 0.5 mm, clamp for hold 0.5 mm
IPTS-20N/IPTS-50N: clamp for pull 3 mm, clamp for hold 13 mm
Travel speed:120, 200, 300, 500, 1000, 1500 mm/min
Peeling angle:165 – 180 degree, infinitely adjustable (angle according to hight)
Measuring units:N, gf, ozf (switchable)
Display:OLED, 4-digit
Overload protect:150 % Full Scale, LED blinks and buzzer warns at 110 %
Memory:Flash memory for max. 1000 values; recallable peak – tension
Setpoints:Programmable Max/Min setpoints with color-coded indicators
Output signal:USB
Temperature range:0 – 40 °C
Air humidity:20 – 80 % RH, max.
Power supply:100 – 240 V AC
Dimensions:765 x 300 x 90 mm (LxWxH)
Weight, net (gross):Approx. 11 kg

Specifications subject to change without notice!

Standard Accessories

  1. Force Recorder Standard

    Force Recorder Standard

    Additional functions in comparison to Force Recorder Light:
    5 graphs at maximum can be displayed in a table
    Requirements: Microsoft Win 7/8/8.1/10
    Order number: SW-22


  2. USB Connecting Cable

    USB cableCable for the USB output to connect the test stand to a PC.


  3. Inspection Certificate

    Inspection CertificateDelivery includes a manufacturers inspection certificate free of charge


Dimensions

Dimensions of test stand IPTS for download:
Delivery Includes

Test stand IPTS with load cell, film fixture, software Force Recorder Standard, USB cable manufacturers inspection certificate and operating instruction in English

Wenn Sie ein Angebot benötigen oder bestellen wollen, kontaktieren Sie uns einfach!


+49 (0)8638 9410-0

+49 (0)8638 4825