Tension Sensor TSF

6 Tension ranges available
from 0 - 100 cN up to 0 - 5000 cN

Stationary electronic tension sensor for measuring sensitive materials as optical fibres, technical fibres etc.

Large, smooth running guide rollers with 70 mm groove diameter for minimized material deflection. The outer rollers can be moved downward, in case of non-measurements

Tension sensor for quick and easy mounting

Categories: Tension Meter, Single Sensors 3 Rollers, TS Series, Tension of fibers and threads up to 2000 cN, Tension of fibers and threads from 2000 cN up to 60 daN, Tension of wires up to 2000 cN, Stationary, electronic, Stationary, electronic, Stationary, electronic, Stationary, electronic

Print page

Special Features

Tension sensor TSF with integrated measuring amplifier and high accuracy of 1 % FS

Large bending radius for gentle handling of sensitive material

Smooth running, V-grooved guide rollers, ball-bearing mounted with 70 mm Ø

The outer rollers can be moved downwards to minimize contact in case of non-measurements

Various output signals are available:
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– current: 4 – 20 mA (optional)
– analog DMS: mV/V (optional)

Easy installation, even afterwards, on existing machines

Easy calibration to customized material by operator – zero and gain calibration is required

Tension sensor with mechanical overload protection

Measuring principle – load cell with high quality strain gauge bridge

Note: a wide range of custom designed models as well modifications are available on request. Please contact us with your demand!

Standard Features

Tension sensor TSF with rugged aluminium housing

Required power supply +15…24 V DC (regulated)

Certificate of Compliance with the order 2.1 according EN 10204 is included

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Lern more about the different tension measuring systems

You are not sure, which system is right for, or where the differences are? Here we explain it for you.

Info tension measuring system

Available Models

Model	Tension Range	Measuring Head Width*	SCHMIDT Calibration Material**
TSF-100	0 – 100 cN	270 mm	PA: 0.12 mm Ø
TSF-200	0 – 200 cN	270 mm	PA: 0.12 mm Ø
TSF-500	0 – 500 cN	270 mm	PA: 0.20 mm Ø
TSF-1000	0 – 1000 cN	270 mm	PA: 0.30 mm Ø
TSF-2000	0 – 2000 cN	270 mm	PA: 0.50 mm Ø
TSF-5000	0 – 5000 cN	270 mm	PA: 0.80 mm Ø

Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g.
* Outer distance between outside guide rollers
** Suitable for 95 % of applications PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

For the tension sensor TSF we offer different display units for one or more sensors, as well as strain gauge amplifier.

Find further information at display units and amplifier

Tension Sensor TSF can be reconverted for special applications.

Find further information at special design

Specifications

Calibration:	According to SCHMIDT factory procedure
Accuracy:	±1 % full scale and ±1 digit Other calibration material: ±3 % full scale or better
Overload protection:	100 % of tension range
Measuring principle:	Strain gauge bridge
Measuring roller deflection:	Max. 0.5 mm
Natural frequency:	Approx. 500 Hz, depending on tension range
Signal processing:	Analog
Temperature drift:	Less than ±0.05 % full scale/ºC
Output signal:	Standard: 0 – 1 V DC (analog) impedance: ≥ 5 kΩ Option: 0 – 10 V DC (analog), 4 – 20 mA (current) or mV/V (DMS)
Damping (fg):	Standard: 30 Hz (other values on request)
Temperature range:	10 – 45 ºC
Air humidity:	85 % RH, max.
Power supply:	+15…24 V DC, 21 mA regulated Code A3: max. 50 mA regulated Code A10: max. +5 V DC, max. 20 mA regulated
Housing material:	Aluminium
Dimensions:	See dimensions
Weight, net (gross):	Approx. 800 g (1100 g)

Specifications subject to change without notice!

Guide Rollers

Order-Code	Line Speed v_max. …m/min	Roller Material
Standard	5000	Hard-coated aluminium

Accessories (optional)

E10061 - Diode Plug with Bayonet Cap
Diode Plug suitable for sensors of TS series,
cable outlet 3.5 – 6 mm
Order number: E10061

EK0603, EK0605 and EK0610 - Connecting Cable with 2 diode plugs
Connecting cable with 2 diode plugs, for analog output and voltage signal.
For connecting the TS sensor to the display unit SCD-1.
Order number: EK0603, Length 3 m
Order number: EK0605, Length 5 m
Order number: EK0610, Length 10 m

EK0612, EK0614 and EK0615 - Connecting Cable with 1 diode plug and open ends
Connecting cable with 1 diode plug and open ends, for analog output and current signal.
For connecting sensors of TS series to the display unit SC-PM.
Order number: EK0612, Length 3 m
Order number: EK0614, Length 5 m
Order number: EK0615, Length 10 m
Other cable length available on request!