Tension Meter DXR

6 Tension ranges available
from 200 - 2000 cN up to 5 - 50 daN
Special purpose tension meter for measuring all kinds of tapes and bands, such as textile ribbons, films, foils, fiber bunches, etc. roller width 50 and 100 mm
Mechanical hand-held instrument with cylindrical tape rollers supported and mounted on both sides
The tension meter is equipped with both-sided flanged outside guide rollers for better filament guide
Special Features
Standard Features
– the guide rollers
– the measured material
– the readings
Note
Tension meter DXR does not include a filament guide and material thickness compensator
When selecting the instrument for your specific application, please keep in mind that:
- Rollers of different widths are not interchangeable by the user.
- The roller width should correspond with the width of the material to be measured.
Otherwise incorrect measuring results may occur and the instrument may be damaged.
SCHMIDT has the solution to any tension measuring problem! Please contact us to discuss your application requirements!
To assist you in selecting the right tension meter for your specific application, please furnish:
- Kind and dimensions of the material to be measured
- Expected tension range
- Short description of the application
- Material sample of about 5 m
Available Models
Model | Measuring Range* | Measuring Head Width** | Roller Width |
DXR-2000 | 200 – 2000 cN | 135 mm | 50, 100 mm |
DXR-5000 | 400 – 5000 cN | 135 mm | 50, 100 mm |
DXR-10K-L | 2.5 – 10 daN | 135 mm | 50, 100 mm |
DXR-20K-L | 5 – 20 daN | 200 mm | 50, 100 mm |
DXR-30K-L | 5 – 30 daN | 200 mm | 50, 100 mm |
DXR-50K-L | 5 – 50 daN | 200 mm | 50, 100 mm |
Other units of measure available – g or kg.
* SCHMIDT calibration material textile ribbon or film, depending on tension range and roller width
** Outer distance between outside guide rollers
Important for your order:
Please specify model and roller width! Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.
Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.
Tension Meter DXR can be reconverted for special applications.
Find further information at special design
Calibration: | According to SCHMIDT factory procedure |
Accuracy: | ±1% full scale or ±1 graduation on scale |
Scale diameter: | 41 mm |
Temperature range: | 10 – 45 ºC |
Air humidity: | 85 % RH, max. |
Housing material: | Die-cast aluminium |
Dimensions: | See dimensions |
Weight, net (gross): | Approx. 980 g (2200 g) |
Specifications subject to change without notice!
SCHMIDT scales are manufactured according to the most stringent quality requirements. Printed scales are not used. Instead, each scale is individually marked for the instrument involved. This ensures highest quality. Our special procedure makes it possible to provide tension meter DXR
- calibrated to custom supplied material
- fine tuned to a specific tension range
- other units of measure such as g or kg
- DXR-2000
- DXR-5000
- DXR-10K-L
- DXR-20K-L
- DXR-30K-L
- DXR-50K-L
Roller Width | Line Speed vmax. … m/min | Roller Material |
50 mm | 1000 | Hard-coated aluminium |
100 mm | 1000 | Hard-coated aluminium |
- Code L - Special Lever
Standard for tension meter DXR-10K-L and higher ranges.
Facilitates acquisition of the running material when measuring high tensions. Reduces force necessary to extend outer rollers. - Code M - Memory Pointer
For tension range 20 – 120 cN and higher
Retains the highest measured value (PEAK). Available for mechanical tension meters.
Dimensions of tension meter DXR for download:
Tension meter DXR with carrying case, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charge
To order tension meter DXR:
Please indicate the complete order number, e. g.:
Model with tension range | Code Roller width (if not standard) | Code for Attachments | Complete Order-No. | |||
DXR-5000 | + | 50 | + | M | = | DXR-5000-50-M |