Mechanical tension meter for measuring warp threads on stagnant weaving machines
Hand-held instrument for determinating the tension of a single warp thread or several threads
Tension meter with large reference frame for easy placing on the yarn
Finger SupportRoller shifting mechanism ensure easy acquisition of the material
Tension meter DXK does not include a material thickness compensatorl
Operation:
We recommend always measuring the same number of ends, such as 5 or 10 ends (repeat of pattern) or only a single end at a time. During measurement make sure that the ends are not pulled or pressed out of their alignment.
| Model | Measuring Range | SCHMIDT Calibration Material* |
| DXK-300 | 20 – 300 cN | fabric tape |
| DXK-1000 | 100 – 1000 cN | fabric tape |
| DXK-2000 | 200 – 2000 cN | fabric tape |
| Calibration: | According to SCHMIDT factory procedure |
| Accuracy: | ±1 % full scale or ±1 graduation on scale |
| Scale diameter: | 41 mm |
| Temperature range: | 10 – 45 ºC |
| Air humidity: | 85 % RH, max. |
| Housing material: | Die-cast aluminium |
| Dimensions: | See dimensions |
| Weight, net (gross) | Approx. 470 g (1000 g) |
Specifications subject to change without notice!
SCHMIDT scales are manufactured according to the most stringent quality requirements. Printed scales are not used. Instead, each scale is individually marked for the instrument involved. This ensures highest quality. Our special procedure makes it possible to provide tension meter DXK
Retains the highest measured value (PEAK). Available for mechanical tension meters.
Inspection Certificate 3.1 according DIN EN 10204
Tension meter DXK with carrying case, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of chargePlease indicate the complete order number, e. g.:
| Model with tension range | Code for attachment | Complete Order No. | ||
| DXK-300 | + | M | = | DXK-300-M |
