Memory for 60.000 readings
Tension meter DTXE with 5 different memory modes:
Mode S: statistics only
Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement (e.g. short time spooling)
Mode C: continuous logging over a user set time and different series of measurement (2 Hz)
Mode F: fast, continuous logging over a user set time and different series of measurement (1000 Hz)
Mode D: storage of single readings and statistic
1 factory adjustment, as well as 10 material memory locations for customer made calibrations
Software Tension Inspect 3 for displaying real-time readings on a PC and to store them into a file
Wi-Fi module for wireless communication with a PC (optional)
Small measuring head width with of only 36 mm for measurements at positions with limited space
Turned-up outer finger edges guide the running filament into the roller grooves
Length of measuring head approx. 64 mm
Small, ball-bearing mounted, V-grooved guide rollers
Calibration with Polyamide Monofilament (PA)
Tension meter DTXE with large, backlight LCD-display
3 different display modes:
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)
The display rotates in 90° steps for better reading
New, unique, force reduced material catching system
Automatic „Zero-Setting“ in each measuring position using a special sensor technique
1 factory adjustment, as well as 4 material memory locations for customer made calibrations
Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits
High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation
Selectable units of measurement: cN, daN, g, kg, N, lb
Menu set-up in English or German language
Flexible menu set-up to meet operators demand
Some functions can be password protected