Large, v-grooved guide rollers with 32 groove diameter, ball bearing mounted
Large bending radius assures gentle handling of the material being measured
Special guides on the bracket assembly permit easy material acquisition
Calibration with Polyamide Monofilament (PA)
Tension meter DTSF with large, backlight LCD-display
3 different display modes:
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)
The display rotates in 90° steps for better reading
New, unique, force reduced material catching system
Automatic „Zero-Setting“ in each measuring position using a special sensor technique
1 factory adjustment, as well as 4 material memory locations for customer made calibrations
Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits
High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation
Selectable units of measurement: cN, daN, g, kg, N, lb
Menu set-up in English or German language
Flexible menu set-up to meet operators demand
Some functions can be password protected
Note: Tension meter DTXF offers additional features, like interface, statistical evaluation on PC and a large internal memory.
USB AC adapter with 4 adapters (EU/USA/UK/AUS-NZ) for 100 – 240 V AC and USB cable for loading the accumulator
To mount the gauge for online use, the housing can be equipped with mounting threads. There are to bolts with M5 female thread on the rear side. This feature cannot be installed afterwords.
Tension meter DTSF with carrying case, accumulator and USB AC adapter with country adapters (EU, US, UK), USB cable, Certificate of compliance with the order 2.1 according EN 10204 free of charge, operating instruction in German or English (as requested)
