TOP
Menu
Home > Tachometer > PH Series > Tachometer PH-100A

Tachometer PH-100A

Hand-held tachometer for accurate contact measurement of revolution of engines or shafts as well as surface speed and length e.g. belts and conveyer belts.

Tachometer with 10 selectable measuring units and memory

Low cost and efficient hand-held model

CE mark
Categories: ,
Print page Print page

Special Features


Hand-held tachometer PH-100A for contact measuring of revolutions, line speeds and length;
the measurement is carried out, as long as the measuring key is pressed

Konakt measuring tachometer

Contact measurement of revolutions, surface speed and length



For exact measurements of
– revolutions per minute
– total revolutions
– length and velocity with different metric and English units

10 User selectable measuring units (rpm; rev, m/min; in/min; yd/min; ft/min; m; in; ft; yd)

Tachometer with big, easy to ready LCD display

Hand-held tachometer PH-100A with automatic and manual memory (Max, Min, mean, last reading and 10 separate readings) for recall in display

Electricity saving electronic assures a long battery durability

Standard Features


Tachometer with handy and erognomically housing design

Easy to use

Compact, rugged plastic housing

Certificate of Compliance with the order 2.1 according EN 10204 is included

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

ModelApplication
PH-100Acontact measuring
alternative
PH-200LCcontact and non-contact measuringmore
PH-200Lnon-contact measuringmore
Specifications

Measuring range:
(Floating decimal point)		Revolution (contact):1 – 25000 rpm
Revolution (counter): 1 – 99999 rev
Speed: 0.1 – 3810 m/min; 3 – 99999 in/min; 0.2 – 12500 ft/min;
0.1 – 4167.0 yd/min
Length: 0.01 – 99999 m; 1 – 99999 in, 0.1 – 99999 ft; 0.01 – 99999 yd
Accuracy: Revolution: 1 – 599 ±1 rpm ±1 Digit
600 – 25000 rpm ±0.01 % of readings ±1 Digit
Speed and length: ±0.4% of readings ±1 Digit
Measuring units: Revolution: rpm;
Total revolution (counter): rev
Speed: m/min; ft/min; yd/min; in/min
Length: m; in; ft; yd
Memory:14 readings (10 readings, MAX, MIN, mean and last) are stored for 5 minutes after last use
Resolution:Length: 0.00762 m/Impulse,
Revolution: 20 Impulse/revolution
Display:5 digit LCD 12 mm high
Display update:1 s
Over range indicator:”OVR” flashes at the display
Auto power off:After 5 min of non-use
Power supply:Battery 3 x 1.5 V Type AA, (approx. 50 h continuous use)
Low battery indicator:”LO BAT” flashes at the display
Temperature range:5 – 45 °C
Air humidity:85 % RH, max.
Housing:Polyamide, fiber-reinforced
Dimensions:123 x 64 x 31 mm (LxWxH)
Weight, net (gross):Approx. 180 g (400 g)

Specifications subject to change without notice!

Standard Accessories

  1. 10006S - Rubber Tip

    Tachometer PH mit SpitzmitnehmerTip for contact measurement of revolutions (rpm)
    Order number: 10006S


  2. 10007S - Funnel Tip

    Tachometer PH mit HohlmitnehmerTip for contact measurement of revolutions (rpm)
    Order number: 10007S


  3. 10002S - Rubber Measuring Wheel

    Tachometer PH mit 6 Inch GummimessradWheel with 6 inch circumference for measuring line speeds
    Order number: 10002S


Accessories (optional)

  1. 10005S - Grooved Wheel

    Tachometer PH mit NutenmessradMeasuring wheel (6 inch circumference) with special groove for measuring yarn and wire speeds.
    Order number: 10005S


  2. Calibration Certificate

    Calibration certificate with calibration report is optional available.


Dimensions

Dimensions of tachometer PH-100A for download:
Drawing (PDF)
Delivery Includes

Lieferumfang Tachometer PH-100ATachometer PH-100A with 3 batteries, carrying case, 1 rubber tip, 1 funnel, 1 rubber measuring wheel (6 inch circumference), Certificate of Compliance with the order 2.1 according EN 10204 free of charge
and operating instructions in German and English

If you want to get a quote or want to place an order, please contact us!


+49 (0)8638 9410-0

+49 (0)8638 4825


Contact us
Print page Print page