Display Unit SC-PM4 and SC-PMD4

Panel mount digital display for max. 4 tension sensors. Outputs: USB, RS-422 and analog .

4 different calibrations for customer supplied material can be saved for each channel

Using the USB or RS-422 output all tension readings can be sent to PC for data analysing and storage

Categories: Tension Meter, Stationary, electronic, Display Units and Amplifier

Print page

Special Features

The display unit SC-PM4 is suitable to connect max. 4 sensors (different ranges are possible) with analog output 0 – 1 V DC, the display unit SC-PMD4 is convenient for max. 4 sensors (different ranges are possible) without integrated amplifier (output mV/V)

Backlight, graphic LCD display with 2 different display modes:
– Readings with alarm control
– Bar chart, reading and alarm control

Various output signals are available:
– digital (standard): USB (front side), RS-422 (rear side)
– analog (optional): 0 – 10 V DC (rear side)

Adjustable damping for easier reading, if tension fluctuates

User set limits (MIN and MAX alarms) and open collector output for external control units

Each channel of display unit SC-PM4 can be scaled to engineering units as grams, cN, daN, N, g, kg, lb and oz depending to the used sensor

Easy calibration to customized material by the operator – zero and gain calibration is required for the connected sensor

Possibility to store 4 different materials curves for each channel

Easy operation using keys: menu for configurating the device (alarm limits, damping, units, tension range, language, material curve)

The set-up menu can be password protected

Standard Features

Panel mount display unit (1/4 DIN IEC 61554 cutout – 91.5 x 91.5 mm)

Required power supply 15 – 24 V DC

The instrument provides the required power for the connected sensor

CE certified with sensor connected

Available Models

Model	Connectable Sensors	Output Signal
SC-PM4	Sensors with amplifier (0 – 1 V)	USB, RS-422, open collector
SC-PMD4	Sensors without amplifier (mV/V)	USB, RS-422, open collector

Specifications

Digital display:	Graphic LCD display with backlight
Engineering units:	cN, daN, g, kg, lb or oz selectable
Adjustment:	4 material curves for each channel can be stored
Selectable Damping:	9 adjustable settings
Signal processing:	Digital
Output signal:	Digital (standard): USB and RS-422 (57600, 8, N, 1) Analog (option): 0 – 10 V DC /R_Last ≥ 5kΩ
Input signal:	0 – 1 V DC, option mV/V
Alarm limits:	Programmable MIN.- MAX limits per sensor
Output signal of the alarm limits:	Open collector per Sensor (common signal for MIN. and MAX.), max. 30 V DC, 10 mA
Exit hub:	Terminal strip
Power supply for sensor:	Yes
Power supply:	15 – 24 V DC, 100 mA
Temperature range:	10 – 45° C
Air humidity:	85 % RH, max.
Housing:	Plastics
Dimensions:	110 x 90 x 90 mm (LxWxH), mounting cut out 91.5 x 91.5 mm
Weight, net (gross):	Approx. 300 g (700 g)

Specifications subject to change without notice!

Standard Accessories

EK0662 - USB Connecting Cable
Cable for the USB output to connect the tension meter to a PC.
Cable length 1,50 m
Order number: EK0662

Accessories (optional)

SW-TI3-4 - Software Tension Inspect 3
Tension Inspect 3 Infos (PDF)
Software for displaying and saving readings on a PC (Win 7 and higher; 32 bit and 64 bit).
Only for display units with digital output signal.
Features:
– Real-time reading
– The readings are also shown in a X-Y- diagram (time/date-tension)
– For data analysing the buffered diagram can be zoomed and scaled
– Recording of the buffered readings as CSV-file (on user request)
– Download of values to Excel
Max. 4 Sensors can be monitored
Order number: SW-TI3-4

EK0612, EK0614 and EK-0615 - Connecting Cable for TS Sensors
Cable with 1 Diode plug and open ends for analog output and current signal.
For connecting tension sensors of TS series to the display unit SC-PM4.
Order number: EK0612, Length 3 m
Order number: EK0614, Length 5 m
Order number: EK0615, Length 10 m

EK0620 and EK0621 - Connecting Cable for FS Sensors
Cable with 1 M9 sub-minimatur plug and open ends cable for the analog output.
For connecting sensors of FS series to the display unit SC-PM4.
Order number: EK0620, Length 2 m
Order number: EK0621, Length 5 m
Order number: EK0627, Length 10 m

EK0622 and EK0623 - Connecting Cable with right angle Plug for FS Sensors
Cable with 1 M9 sub-minimatur right angle plug and open ends for the analog output.
For connecting sensors of FS series to the display unit SC-PM4.
Order number: EK0622, Length 2 m
Order number: EK0623, Length 5 m

EBG800 - Serial Port Converter
Converter from RS-422 to RS-232 with terminal strip
Order number: EBG800

EK0643 - RS-232 Connecting Cable
Connecting cable for connecting EBG-800 converter to PC, length 2 m
Order number: EK0643

K50204 - AC Adapter
Recharger with 4 adapters (EU/USA/UK/AUS-NZL) for worldwide use,
100 – 240 V AC
Order number: K50204

Output Signal

Standard

Output signal:
digital: USB
4 x open collector
To connect the display to a PC.
Max. 200 readings can be transferred per second.

Standard

Output signal:
digital: RS-422
4 x open collector
Used to send data over a longer distance or multi user systems; Max. 200 readings can be transferred per second.

Code A2

Output signal:
analog: 0 – 10 V DC

Calibration Report

Inspection Certificate 3.1 according DIN EN 10204
including a calibration report is optional available.

Inspection Certificate 3.1 (PDF)

Delivery Includes

Display unit SC-PM4 with transport packaging, USB connecting cable, operating instruction in German and English, Certificate of Compliance with the order 2.1 according EN 10204 free of charge

Instruction Manual

Download the instruction manual of display unit SC-PM4:

Instruction Manual SC-PM4 (PDF)

If you want to get a quote or want to place an order please contact us.

+49 (0)8638 9410-0

+49 (0)8638 4825

[email protected]

Print page

Display Unit SC-PM4 and SC-PMD4