2 operation modes:
Single or continuous operation for constant test conditions
– manual test mode: Feed continuous so long as button is pressed or he limit switch is reached
– auto test mode: Force gauge travels a defined distance continuously up and down
Single or continuous operation for constant test conditions
– manual test mode: Feed continuous so long as button is pressed or he limit switch is reached
– auto test mode: Force gauge travels a defined distance continuously up and down
The adjusted speed is indicated in the display
Integrated timer and counter function for accomplishment of endurance tests (To apply constant force for a certain number of strokes and/or at certain time
The display shows the adjusted basic conditions, as well as the executed strokes, respectively the elapsed time.
The display shows the adjusted basic conditions, as well as the executed strokes, respectively the elapsed time.
Test stand MX3-2500N with travel speed from 2.5 to 300 mm/min (adjustable in 0.5 mm/min increment)
2 manual adjustable limit switches for inversion of the direction
Gauge overload protection in combination with force gauge ZTS, ZTA or display unit FA Plus only (additional connecting cable is necessary)
3 different speeds adjustable (Start, measuring, back)
Travel distance max. 288 mm (588 mm with extended stroke), depending on the mounted force gauge (see dimensions)
Operation conditions can be adjusted with software CS Test Preset Builder by PC or tablet (can be downloaded for free)
The menu can be locked by a password to prevent measurement conditions of accidental changes
FSA: In combination with force gauge model ZTA and software »Force Recorder Professional« force-displacement and force-time graphs can be generated
Connecting cable for test stand with force gauge (Series ZT) to stop feed at Fmax or overload (force control), length approx. 1.5 m
Connecting cable for test stand MX3-2500N-FA with force gauge ZTA to enable force-displacement measurement.
Connecting cable for signal input by customer.