Tension Meter DXB

9 Tension ranges available
from 10 - 50 cN up to 5 - 20 daN

Special purpose tension meter for measuring all kinds of tapes and bands, such as textile ribbons, films, foils, fiber bunches, etc.

Hand-held mechanical instrument with cylindrical tape rollers (width max. 50 mm) pointing towards the operator

The tension meter is equipped with both-sided flanged outside guide rollers for better filament guide

Categories: Tension Meter, Hand-Held, mechanical, Hand-Held, mechanical, DX Series, Carbon winding machines, Winding machines

Print page

Special Features

The analog display of tension meter DXB shows changing and fluctuating tensions fast and enables an optimal process adjustment

Tape rollers with contact surface from 7 mm up to 50 mm are available

Dual-flanged outer guide rollers with various widths for better filament guide (single-flanged rollers optional, recommendable if the material being measured is wider than the tape roller)

Tension meter with roller shifting mechanism for easy acquisition of the running material

Built-in mounting holes permit fixed installation for continuous tension measurement

Special finger support located on the rear side reduces the effort to move the outer roller assembly

Standard Features

Everything in operator’s view:
– the guide rollers
– the measured material
– the readings

Tape rollers, ball-bearing mounted

Each instrument is individually calibrated for highest accuracy

41 mm Ø scale

Tension meter with rugged aluminium housing

Certificate of Compliance with the order 2.1 according EN 10204 is included

Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Finger Support

We recommend mounting a finger support for higher tension ranges

Note

Tension meter DXB does not include a filament guide and material thickness compensator

When selecting the instrument for your specific application, please keep in mind that:

Rollers of different widths are not interchangeable by the user.
The roller width should correspond with the width of the material to be measured. Otherwise incorrect measuring results may occur and the instrument may be damaged.

SCHMIDT has the solution to any tension measuring problem! Please contact us to discuss your application requirements!

To assist you in selecting the right tension meter for your specific application, please furnish:

Kind and dimensions of the material to be measured
Expected tension range
Short description of the application
Material sample of about 5 m

Find further information at special design

Available Models

Model	Measuring Range*	Measuring Head Width**	Roller Width
DXB-50	10 – 50 cN	55 mm	7 mm
DXB-120	20 – 120 cN	55 mm	7, 10, 15, 20, 30 mm
DXB-200	20 – 200 cN	55 mm	7, 10, 15, 20, 30 mm
DXB-400	20 – 400 cN	55 mm	7, 10, 15, 20, 30 mm
DXB-1000	100 – 1000 cN	55 mm	7, 10, 15, 20, 30, 36, 41, 50 mm
DXB-2000	200 – 2000 cN	117 mm	7, 10, 15, 20, 30, 36, 41, 50 mm
DXB-5000	400 – 5000 cN	117 mm	7, 10, 15, 20, 30, 36, 41, 50 mm
DXB-10K	2.5 – 10 daN	117 mm	7, 10, 15, 20, 30, 36, 41 mm
DXB-20K-L	5 – 20 daN	217 mm	7, 10, 15, 20, 30 mm

Other tension ranges, measuring head widths and material path calibrations available on request.
Other units of measure available – g or kg.
* SCHMIDT calibration material textile ribbon or film, depending on tension range and roller width
** Outer distance between outside guide rollers

Important for your order:
Please specify model and roller width! Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

Tension Meter DXB can be reconverted for special applications.

Find further information at special design

Specifications

Calibration:	According to SCHMIDT factory procedure
Accuracy:	±1 % full scale or ±1 graduation on scale
Scale diameter:	41 mm
Temperature range:	10 – 45 ºC
Air humidity:	85 % RH, max.
Housing material:	Die-cast aluminium
Dimensions:	See dimensions
Weight, net (gross):	Approx. 520 g (1300 g)

Specifications subject to change without notice!

Scales

SCHMIDT scales are manufactured according to the most stringent quality requirements. Printed scales are not used. Instead, each scale is individually marked for the instrument involved. This ensures highest quality. Our special procedure makes it possible to provide tension meter DXB

calibrated to custom supplied material
fine tuned to a specific tension range
other units of measure such as g or kg

: DXB-50

: DXB-120

: DXB-200

: DXB-400

: DXB-1000

: DXB-2000

: DXB-5000

: DXB-10K

: DXB-20K-L

Tape Rollers

Roller Width	Line Speed v_max.… m/min	Roller Material
7 mm	1000	Hard-coated aluminium
10 mm	1000	Hard-coated aluminium
15 mm	1000	Hard-coated aluminium
20 mm	1000	Hard-coated aluminium
30 mm	1000	Hard-coated aluminium
36 mm	1000	Hard-coated aluminium
41 mm	1000	Hard-coated aluminium
50 mm	1000	Hard-coated aluminium

*Other roller materials (nickel-plated steel or plastic), as well as spedial coatings (Code CF – for carbon fibre, NA optimized, Code KE – ceramic, Code AH – anti adhesive ) are available on request.

Attachment

Code A - Air Damping
For tension range from 20 – 120 cN up to max. 400 – 5000 cN.
This adjustable mechanical air dashpot is recommended for applications in which great fluctuations of the measured tension occur, as in spooling and winding machines. This assures steady tension readings on scale.

Code L - Special Lever
Standard for tension meter DXB-20K-L.
Facilitates acquisition of the running material when measuring high tensions. Reduces force necessary to extend outer rollers. Recommended for tension meter DXB-10K.

Code M - Memory Pointer
For tension range 20 – 120 cN and higher
Retains the highest measured value (PEAK). Available for mechanical tension meters.

Calibration Report

Inspection Certificate 3.1 according DIN EN 10204
including a calibration report is optional available

Inspection Certificate 3.1 (PDF)

Spare Rollers

Download an overview for the tape rollers:

Tape Roller Catalogue (PDF)

Dimensions

Dimensions of tension meter DXB for download:

Drawing (PDF)

Delivery Includes

Tension meter DXB with carrying case, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charge

How To Order

To order tension meter DXB:

Please indicate the complete order number, e. g.:

Model with tension range		Roller width in mm		Code for attachment		Complete Order-No.
DXB-1000	+	20	+	A	=	DXB-1000-20-A

Instruction Manual

Download the instruction manual of tension meter DXB:

Instruction Manual (PDF)

If you want to get a quote or want to place an order please contact us.

+49 (0)8638 9410-0

+49 (0)8638 4825

[email protected]

Print page

Infos

Infos

Infos

Infos

Infos