TOP
Menu

Shore Durometer PHPSA

Durometer according to Shore for determining the indentation hardness of soft rubber, elastomers, natural rubber, soft PVC, leather, etc.

Shore A hardness tester according DIN 53505, ISO 48-4, ISO 868, ASTM D 2240

Durometer for measurement with limited access space

Special Features


Hardness tester with long thin shaft for measurement with limited access space

Constant pressure indicating system assures uniform test pressure elimination false reading due to differences between operators

Shore hardness tester with 18 mm measuring face diameter

Adjustable Min./Max. indicator marks to highlight working range of the durometer PHPSA

Optionally available: Calibration certificate with calibration report

Standard Features


Easy to use

High repeatability

Durometer with an application range of 10 – 90 Shore A units

Certificate of Compliance with the order 2.1 according EN 10204 is included

Available Models

ModelShoreApplication
PHPSAShore Asoft rubber, elastomers, natural rubber, soft PVC, leather, etc.
alternative
PHPSBShore Bfor harder material than Shore Amore
PHPSOShore Osoft elastomers, soft elastic materials, medium fast textilesmore

Indentor

ConeTapered pin
U-grooved
Eindringkörper für Härteprüfer nach Shore A und Shore CShore AEindringkörper für Härteprüfer nach Shore B und Shore DShore BEindringkörper Härteprüfer nach Shore OShore O
Specifications

Indentor:Cone 35°, 1.25 mm Ø
Depth of indentation:0 – 2.5 mm
Area of application:Soft elastomers, soft elastic materials, medium fast textiles
Accuracy:± 1 hardness unit
Application range:10 – 90 Shore A
Standard:DIN 53505, ISO 868, ISO 48-4; ASTM D 2240
Measuring spring force:0.55 – 8.065 N
Test pressure*:Approx. 12.5 N
Display range:0 – 100 Shore A units
Scale diameter:54 mm
Working base:18 mm Ø
Weight net (gross):Approx. 260 g (500 g)
Dimensions:30 x 58 x 170 mm (LxWxH)

Specifications subject to change without notice!

*Spring load of outer ring to create constant pressure

Operation
For measuring the hardness, the spring-loaded outer ring of the housing is pressed downwards until the edge of the ring meets the colored marking on the housing. This ensures a constant pressure and prevents measuring errors.

General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units. As the depth of indentation is max. 2.5 mm the test material has to have a minimum thickness of 6 mm. If thickness is less stack some samples till you reach the required thickness.

Operation with a shore durometer of PHPS series

Attachments and Accessories

  1. Code M - Memory pointer

    Schleppzeiger bei einem HärteprüferMemory pointer to capture and store value (last or highest reading) during measuring.
    Order code: PHPSA-M


  2. HP-P20-100 - Control Rings for 20, 40, 60 and 80 Shore

    Prüfscheiben HP-20-100 für HärteprüferTo determine the displacement at 20, 40, 60 and 80 Shore.
    Includes a base disk as basis for the control rings and an inspection certificate.
    Order number: HP-P20-100


Calibration Report

Kalibrierzeugnis-Calibration Certificate Hans Schmidt GmbHCalibration Certificate
including a calibration report is optional available.

 

Dimensions

Dimensions of durometer PHPSA for download:
Delivery Includes

Scope of delivery durometer PHPS seriesDurometer PHPSA with carrying case, Certificate of Compliance with the order 2.1 according EN 10204 free of charge, operating instructions in English or German as requested

Instruction Manual

Download the instruction manual for durometer PHPSA:

If you want to get a quote or want to place an order please contact us.


+49 (0)8638 9410-0

+49 (0)8638 4825