Torque Meter MTG
Measuring range 0 - 2.000 Nm / 5.000 Nm / 10.00 Nm
Resolution 0.001 Nm / 0.01 Nm
Automatic desktop-torque meter with memory and output signal for checking the opening and close torque of screw caps of bottles, glas jars, cosmetics etc.
For applications in beverage, cosmetic and pharmaceutical industry etc.
Torque meter assures consistent, identical measuring conditions
Torque meter assures consistent, identical measuring conditions
Torque-Meter MTG
Special Features
top
- Torque will be measured without influence by the operator. The results are more accurate and significante as measured with a manual device.
- 3 operation modes:
Normal: Revolution occurs in one direction, until stop-switch will be pressed
NG Stop (Display: +): Revolution occurs in one direction, until the adjusted value is reached
Endurance Test (Display: *): Repeats the operation in two directions (open - close), until the adusted value is reached
 | The following is shown in the information display
|
- 2 display modes:
real time - display the actual force and transfers the reading to the PC
peak force - to measure and save the peak force - Size of container: Cap Ø 20 - 90 mm
Table Ø 20 - 180 mm
Height 80 - 240 mm - Ball bearing mounted working table with 50 mm gummed spring pins
- The cap fastener is equipped with 20 mm gummed spring pins. The fixing screw permittes an accurate clamping torque of 0.5, 1.0, 1.5 or 2.0 Nm. Therefore constant basic conditions can be established.
- Infinitely adjustable speed 3 - 90 degree/sec
- Torque meter with high internal measuring frequency of 1000 times/sec to record peak values and for data transfer of test series to the PC
- Display the opening or closeing torque (clockwise and counter clockwise torque)
- 3 selectable units: Nm, kgfm, Lb.in or Ncm, kgfcm, Lb.in
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display
 | The following is shown in the display
|
- Storage of 1000 values for recall:
- on the display
- for data transfer to a PC
- for printing with report - 3 interfaces: RS 232, analog and USB
Standard Features
- Automatic torque meter for fast, accurate measuring
- High repeatability
- Easy to use
- Mains operation
- Manufacturers certificate with measured values included
Available Models
| Model | Measuring Range | Resolution |
| MTG-2 | 0 - 2.000 Nm | 0.001 Nm |
| MTG-5 | 0 - 5.000 Nm | 0.001 Nm |
| MTG-10 | 0 - 10.00 Nm | 0.01 Nm |
| MTG-2NC | 0 - 200.0 Ncm | 0.1 Ncm |
| MTG-5NC | 0 - 500.0 Ncm | 0.1 Ncm |
| MTG-10NC | 0 - 1000 Ncm | 1 Ncm |
Standard Accessories
 | Connecting Cable, CD-ROM USB cable 1,5 m long, CD-ROM with USB-driver and software "ZP-Logger" for data transfer |
 | Inspection Certificate Delivery includes a manufacturers inspection certificate free of charge Click picture for more information |
Accessories (optional)
 | ZP Recorder Software for data acquisition by USB output Click picture for more information |
 | Connecting Cable For analog output, for connection to a line recorder, length 3 m Order number: CB-104 |
 | Connecting Cable For RS 232 output with sub D 9 female, for connection to PC, length 3 m Order number: CB-204 |
 | Calibration Certificate Calibration certificate with calibration report is optional available. |
Delivery Includes
Torque meter, 1 set spring pins, extension shaft, USB connecting cable, 1 CD-ROM with USB-driver and Software "ZP-Logger" for data transfer, manufactuers calibration report, operating instruction in english
Technische Daten
| Accuracy: | ±0.5 % full scale ±1 digit |
| Measuring frequency: | 1000 per second |
| Measuring units: | Nm, kgfm, Lb.in or Ncm, kgfcm, Lb.in (switchable) |
| Display: | Measuring-Display: LCD 4 digits Info-Display: 16 letters x 2 rows |
| Overload protection: | 150 % full scale, Symbol flashes at 110 % full scale |
| Speed: | 3 - 90° /second |
| A/D-converter: | 24 Bit |
| Memory: | Max. 1000 measuring values |
| Setpoints: | Programmable Max/Min setpoints with color-coded indicators in the LED display |
| Output signal: | RS 232C, analog (±2 V DC), USB |
| Power supply: | 100 V - 240 V AC |
| Temperature range: | 5 - 40 °C |
| Air humidity: | 80 % RH, max |
| Dimensions: | max. 433 x 322 x 635 mm (LxBxH) |
| Weight, net: | 17 kg |
Technische Änderungen vorbehalten!
