Torque Meter HTGS and HTGA

Measuring range 50.00 Ncm/2.000 Nm/5.000 Nm/10.00 Nm
Resolution 0.01 Ncm/0.001 Nm/0.01
Nm

Hand-held torque meter with separate sensor for measuring the torque of screws, components, screw and plug connectors, drive shafts etc.
Mains and battery operation with memory and output signal

Torque meter with digital output signal for data processing with a PC

Special Features

  • Two selectable modes: Real Time: to display torque transition
                                                Peak Mode: to capture the peak torque achieved during a test
  • Display of opening or closing torque (clockwise and counterclockwise torque)
  • Torque meter with high internal sampling rate of 2000 times/sec
  • Display update time 10 times/sec
  • Easy to read Display
Display torque meter HTGS
  • Selectable units: Nm, Ncm, kgfm, kgfcm, lbf.in and ozf.in
  • Multi language set up menu: english, german, spanish, french, italian, chinese, japanese, korean
  • Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
  • Display torque meter HTGS
  • Storage of 1000 values for recall:
    - on the display
    - for data transfer to PC
    - for printing with report
  • 4 output signals: USB, RS232, analog and Mitutoyo Digimatic
  • 6 different sensor attachments are available
  • The torque sensors of model HTGS-10N and HTGA-10N includes an additional supporting handle for better operation
  • Torque sensor with addtional supporting handle for torque measuring unit HTGS
    Torque sensor with pin chuck and
    additional supporting handle

    (only HTGS-10N and HTGA-10N)
    Application picture torque meter model HTGS
    Application: e. g. check-
    ing the torque of screws
    and rotary switch

    Special features of model HTGA in comparison to standard unit HTGS


    • Readings can be transfered from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
    • 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording 
    • Indication of two peak values per measurement.

    Standard Features

    • Inclusive 30 days trial version of Software Force Recorder Professional
    • Torque measuring unit for fast, accurate measuring
    • High repeatability
    • Easy to use
    • Manufacturer`s certificate with measured values is included

    Available Models

    ModelModelMeasuring rangeResolution
    HTGS-0.5NHTGA-0.5N0 - 50.00 Ncm0.01 Ncm
    HTGS-2NHTGA-2N0 - 2.000 Nm (200 Ncm)0.001 Nm (0.1 Ncm)
    HTGS-5NHTGA-5N0 - 5.000 Nm (500 Ncm)0.001 Nm (0.1 Ncm)
    HTGS-10NHTGA-10N0 - 10.00 Nm (1000 Ncm)0.01 Nm (1 Ncm)

    Delivery includes no sensor attachment

    Sensor Attachment

    Torque Pin Chuck

    0.5 to 6.5 mm (not available for torque meters with 0.5 Nm nominal load)
    Order number: HT-DC-6.5

    Click picture for more information

    Hexagon Socket

    3/8" square drive male
    Order number: HT-9.5SQ
    Socket Holder

    1/4" female square drive with 3 Pins (Phillips No. 1, No. 2 and screw blade 6.3 mm)
    Order number: HT-DBH
    Torque Pin Chuck

    1.2 to 13 mm (not available for force gauges with 0.5 and 2 N nominal load)
    Order number: HT-DC-13

    Click picture for more information

    Torque Pin Chuck

    0.5 to 4.0 mm
    Order number HT-DC-4

    Click picture for more information

    Adapter

    M10 male thread
    Order number: HT-AD-M10
    Small Table

    for samples with of 7 up to 50 mm (for max. 5 Nm nominal load).
    Inclusive table pins (ST-P) with urethane surface, length 10 mm.
    Recommended for locks, containers for eye drops, etc.
    Order number: HT-ST

    Click picture for more information

    Small Table

    for samples with from 7 up to 50 mm (for max. 5 Nm nominal load).
    Includes table pins (ST-01P) from stainless steel V2A, corrugated surface, length 10 mm.
    Recommended for electronic components, plugs, etc.
    Order number: HT-ST-01

    Click picture for more information

    Small Table

    for samples with from 7 up to 50 mm (for max. 5 Nm nominal load).
    Includes table pins (ST-02P) with urethane surface, length 30 mm.
    Recomended for cosmetics boxes, door knobs, lamps, etc.
    Order number: HT-ST-02

    Click picture for more information

    Standard Accessories

    ZT Logger

    USB cable approx. 1.5 m long, CD-ROM with USB-driver and software "ZT-Logger" for data transfer
    AC Adapter

    For 100 - 240 V AC
    Order number: ADW-6010
    Inspection Certificate

    Delivery includes a manufacturers inspection certificate free of charge

    Click picture for more information

    Accessories (optional)

    Force Recorder Light

    Software for data aquisition by USB output
    - Force-time graph
    - Force gauge function setting
    - Data storage as CSV file
    Order number: SW-21
    Force Recorder Standard

    Additional functions in comparision to Force Recorder Light:
    5 graphs at maximum can be displayed in a table
    Order number: SW-22
    Force Recorder Professional

    Additional function in comparision to Force Recorder Light
    - 5 graphs at maximum can be displayed i a table
    - Force-angle graphing (possible only in combination with an angle meter)
    Order number: SW-23
    Printer

    To print stored values using Mitutoyo Digimatic output.
    Order number: DP-1 VR

    Click picture for more information

    Paper Roll

    For Printer DP-1 VR, 1 Set = 5 pieces
    Order number: DP-P
    Table Pin

    1 set (4 pieces), 10 mm long with urethane surface for the small table.
    Recommended for locks, containers for eye drops, etc.
    Order number: ST-P

    Click picture for more information

    Table Pins

    1 set (4 pieces), 10 mm long from stainless steel for the small table.
    Recommended for electronic components, plugs, etc.
    Order number: ST-01P

    Click picture for more information

    Table Pins

    1 set (4 pieces), 30 mm long with urethane surface for the small table.
    Recommended for cosmetics boxes, door knobs, lamps, etc.
    Order number: ST-02P

    Click picture for more information

    Test Stand

    for fixing the sensor horizontal or vertical (for torque meters up to max. 5 Nm).
    Weight 1.100 g.
    Order number: SHT-5N

    Click picture for more information

    Connecting Cable

    For analog output, for connection to a line recorder.
    Length approx. 3 m
    Order number: CB-108
    Connecting Cable

    For RS 232 output with sub D 9 female, for connection to PC.
    Length approx. 3 m
    Order number: CB-208
    Connecting Cable

    For Mitutoyo Digimatic output, for connection to Mitutoyo printer DP-1 VR.
    Length approx. 3 m
    Order number: CB-308
    Connecting Cable

    with open ends (37-pin) for all available output signals to connect an unique device.
    Order number: CB-908
    Connecting Cable

    for trigger input (input signal from an external device e. g. electronic switch to stop the measurement)
    Order number: CB-808
    Accumulator

    Nickel metal hydride accumulator, 2-pole connector
    3.6 V, 1300 mAh
    Order number: DP-308

    Click picture for more information

    Calibration Certificate

    Calibration certificate with calibration report is optional available.

    Delivery Includes

    Scoope of delivery torque meter HTGS Torque meter with 1 torque sensor and without sensor attachment, handle (only HTG-10N), AC Adapter, carrying case, manufacturer`s inspection certificate, USB cable 1.5 m, CD-ROM with Driver, simple Software for communication and data logging ZT-Logger and operating instructions in english

    Dimensions

    Dimensions For PDF-file please
    click picture

    Specifications

    Accuracy:0.5 % full scale 1 digit
    Measuring frequency:2000 times/s
    Selectable units:Nm, Ncm, kgfm, kgfcm, Lb.in, and Lb.ozf
    Display:OLED, 4 digit, 14 mm high
    Overload capacity:Approx. 200 % full scale,
    flashing diplay beyond 110 % full scale
    Display update:10 times/s
    Memory:Internal memory for max. 1000 values
    (clockwise or counter clockwise torque and peak values)
    Setpoints:Min (-NG), Max (+NG) programmable,
    with output signal
    Output signal:USB
    RS 232 C (8, 1, N, 19200)
    analog 2 V DC
    Mitutoyo Digimatic
    Open collector 3x comperator (+Ng, OK, -NG)
    overload signal
    Temperature range:5 - 40 C
    Air humidity:80 % RH, max.
    Power supply:Rechargeable NiMH battery pack (approx. 8 hours continuous use)
    and/or 100 - 240 V AC adapter with two adapters(EU/USA)
    Dimensions (approx.):Display unit: 187 x 75 x 34 mm (LxWxH)
    Sensor: 183 x 39 mm (Lx)
    Weight: (approx.):Display unit: 490 g / sensor: 530 g (without pin chuck)
    complete set 2000 g

    Additional functions in comparison to standard unit HTGA
    Force-displacement measurement:In combination with a test stand with linear scale force-displacement measurements are possible
    Memory:Readings can be transfered from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
    High low output:2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
    Extended peak mode:Indication of two peak values per measurement

    Specifications subject to change without notice!

    News

    1209451075.jpg

    New Tension Meter

    1496124624.jpg

    With one click you can download the information sheet for our new tension sensor.

    Contact

    Call us!

    +49 (0)8638 9410-0
    Can't find what you're looking for? Then get in touch with our experts.

    Send us a fax!

    +49 (0)8638 4825
    You can also send us a fax with your message or request.

    Contact via E-Mail!

    info@hans-schmidt.com
    Or feel free to email
    us via our contact form!