Torque Meter HTG2
Measuring range 0 - 0.5 Nm/2.000 Nm/5.000 Nm/10.00 Nm
Resolution 0.001 Nm/0.01 Nm
Torque meter with digital output signal for data processing with a PC
Torque Meter HTG2
Special Features
top
- Two selectable modes: Real Time: to display load transients
Peak Modes: to capture the peak force achieved during a test - Display of opening or close torque (clockwise and counterclockwise torque)
- 3 selectable units: Nm, kgfm, lb.in or Ncm, kgfcm, lb.in
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
 | The following is shown in the display
|
- on the display
- for data transfer to PC
- for printing with report
Torque sensor with additional
supporting handle (Model HTG2-10)
Application: e. g. check-
ing the torque of screws
and rotary switch
Standard Features
- Torque measuring unti for fast, accurate measuring
- High repeatability
- Easy to use
- Manufacturer`s certificate with measured values is included
Available Models
| Model | Measuring range | Resolution | chuck Ø in mm |
| HTG2-2 | 0 - 2.000 Nm | 0.001 Nm | 0.5 - 6.5 |
| HTG2-5 | 0 - 5.000 Nm | 0.001 Nm | 0.5 - 6.5 |
| HTG2-10 | 0 - 10.00 Nm | 0.01 Nm | 0.5 - 6.5 |
| HTG2-0.5NC | 0 - 50.00 Ncm | 0.01 Ncm | 0.5 - 4 |
| HTG2-2NC | 0 - 200.0 Ncm | 0.1 Ncm | 0.5 - 6.5 |
| HTG2-5NC | 0 - 500.0 Ncm | 0.1 Ncm | 0.5 - 6.5 |
| HTG2-10 NC | 0 - 1000 Ncm | 1 Ncm | 0.5 - 6.5 |
Delivery includes chuck TA-00 (TA-04 for HTG2-0.5NC) as standard torque sensor. At your desire the sensor can be equipped with the tips TA-01, TA-02 or TA-03.
Torque Sensors
 | Standard Torque Pin Chuck 0.5 to 6.5 mm Ø Click picture for more information |
 | Torque Wrench 3/8'' square drive male Click picture for more information |
 | Torque Screw Driver 1/4'' female square drive with 3 pins (Phillips No. 1, No. 2 and screw blade 6.3 mm) Click picture for more information |
| Torque Pin Chuck 1.2 to 13 mm Ø Click picture for more information |
 | Torque Pin Chuck 0.5 to 4.0 mm Click picture for more information |
Delivery includes chuck TA-00 (TA-04 for HTG2-0.5NC) as standard torque sensor. At your desire the sensor can be equipped with the tips TA-01, TA-02 or TA-03.
Standard Accessories
 | Inspection Certificate Delivery includes a manufacturers inspection certificate free of charge Click picture for more information |
Accessories (optional)
 | Printer To print stored values using Mitutoyo Digimatic output. Click picture for more information |
 | Z-Link Software for data acquisition using RS 232 output. Click picture for more information |
 | Paper Roll For Printer DP-1 VR, 1 Set = 5 pieces Order number: DP-P |
 | Connecting Cable For analog output, for connection to a line recorder, length 3 m Order number: CB-104 |
 | Connecting Cable For RS 232 output with sub D 9 female, for connection to PC, length 3 m Order number: CB-204 |
 | Connecting Cable For Mitutoyo Digimatic output, for connection to Mitutoyo evaluation units, length 3 m Order number: CB-304 |
 | Calibration Certificate Calibration certificate with calibration report is optional available. |
Spare Parts
 | Spirale Cable Spirale cable for connection of sensor to display unit Click picture for more information |
Delivery Includes
 | Torque meter with carrying case, sensor and standard-pin chuck (Typ TA-00), coiled cable max. 2 m, manufacturer`s certificate, operating instructions in german and english |
Specifications
| Accuracy: | ±0.5 % full scale ±1 digit |
| Sampling rate: | 1000 times/s |
| Selectable units: | Nm, kgfm, Lb.in oder Ncm, kgfcm, Lb.in |
| Display: | 4 digit, 14 mm high |
| Overload capacity: | 150 % full scale (flashing beyond 110 % full scale) open collector output signal |
| Zero adjustment: | 10 % full scale |
| A/D converter: | 24 bit |
| Memory: | Flash-memory for max. 1000 measuring recall both peaks, open and close torque |
| Setpoints: | Min (-NG), Max (+NG) programmable, with output signal (open collector) and LED light emitting diode |
| Output signal: | RS 232 C (8, 1, N, 19200) analog ±2 V DC Mitutoyo Digimatic open collector 4x (+NG, Ok, -NG, OVL), max. 30 V DC, 10 mA |
| Temperature range: | 5 - 40 °C |
| Air humidity: | 85 % RH, max. |
| Power supply: | Rechargeable NiMH batteries (approx. 8 Std. continuous use / charging time approx. 10 hours ) and/or 230 V AC adapter |
| Dimensions (approx.): | Display unit: 220 x 78 x 32 mm (LxWxH) Sensor: 150 x 39 mm (LxØ) |
| Weight: (approx.): | Display unit: 440 g / sensor: 530 g complete with carrying case 2000 g |
Specifications subject to change without notice!
