Tension Sensor FSH

6 tension ranges from 0 - 1000 cN up to 0 - 50.00 daN

Stationary electronic tension sensor for flexible material as wires, thin ropes and cables up to 8 mm
Large, hardened guide rollers for minimized material deflection with 29.5 mm groove

Special Features

  • Universal mounting possibility - easy to install: Housing mounting or cylindrical hole mounting (mounting cut out 38.5 - 40 mm )
Mounting drawing tension sensor FS1
  • Guide rollers 29.5 mm groove , V-grooved or U-grooved, ball-bearing mounted
  • Tension sensor with integrated measuring amplifier
  • Various output signals
    - analog
    - digital (optional)
    - current (optional
  • Easy calibration to customized material by operator
  • Tension sensor with mechanical overload protection

Standard Features

  • Tension sensor with aluminium housing
  • Power supply +15...24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

ModelTension Range
cN
Measuring Head Width*
mm
SCHMIDT
Calibration Material**
FSH-10000 - 1000150PA: 0.30 mm
FSH-20000 - 2000150PA: 0.50 mm
FSH-50000 - 5000200PA: 0.80 mm
FSH-10K0 - 10 daN200PA: 1.00 mm
FSH-20K0 - 20 daN250PA: 1.50 mm
FSH-50K0 - 50 daN250Steel rope 1.50 mm
(7x7x0.20)

Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g or kg
* Outer distance between outside guide rollers or outside dimensions of front plate
** Suitable for 95 % of applications PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

Tension sensor FSH-10K Tension sensor FSH-50K
Model FSH-10K, measuring head width 200 mm Model FSH-50K, measuring head width 250 mm

Guide Rollers

Order-Code
Line Speed
...m/min
Roller Material
Standard4000Hardened steel
Code R14000Hard crome-plated steel (radius R5)
Code B62000Hardened steel, width 6 mm
Code B102000Hardened steel, width 10 mm

Click the Order-Code, to get picture and drawing of the guide rollers

Spare Rollers

Guide Rollers

Click picture to get an
overview for the guide rollers

Output Signal

Standard

Output signal 0 - 1 V DC

Click picture for more information

Code A2

Output signal: 0 - 10 V DC

Click pictures for more information

Code A3

Output signal: 4 - 20 mA DC

Click picture for more information

Code USB

Output Signal: digital USB
Up to 500 readings can be transfered per second
No external power supply is required

Click picture for more information

Code 232

Output signal: - digital RS 232
Up to 200 readings can be transfered per second,
(internal sampling rate max. 4800 times/s)

Click picture for more information

Code 422

Output signal: digital RS 422
max. 32 sensors can be connected in line to a PC

For more information please click here

Standard Accessories

Connecting Cable

Connecting Cable

For USB output for connecting the tension meter to a PC.
Cable length 3 m
Order number: EK0805

Only standard accessory for sensors with code USB!

Click picture for more information

Accessories (optional)

Tension Inspect 3

Software for sensors with digital output Signal for displaying and saving readings on a PC (Win XP and higher; 32 Bit and 64 Bit).
Order number: SW-TI3

Click picture for more information

M9 Sub-Miniatur connector

Suitable for sensors of FS series,
cable outlet 3.5 - 5 mm
Order number: E10071

Click picture for more information

M9 Sub-Miniatur Right Angle Plug

Suitable for sensors of FS series,
cable outlet 3.5 - 5 mm
Order number: E10070

Click picture for more information

Connecting Cable

With one M9 sub-miniatur connector and open ends for analog output.
For connecting sensors of FS series to the display unit SC-PM.
Order number: EK0620, Length 2 m
Order number: EK0621, Length 5 m

Click picture for more information

Connecting Cable

With one M9 sub-miniatur right angle plug and open ends for analog output.
For connecting sensors of FS series to the display unit SC-PM.
Order number: EK0622, Length 2 m
Order number: EK0623, Length 5 m

Click picture for more information

Connecting Cable

With one M9 sub-miniatur connector and one diode plug.
For connecting sensors of FS series to the display unit SCD-1 or SC-1.
Order number: EK0624, Length 2 m

Click picture for more information

Connecting Cable

For sensors with RS 232 interface
Code 232
Order number: EK0640

Click picture for more information

Extension Cable

for RS 232 connecting cable EK0640, length 2 m
Order number: EK0643

Click picture for more information

Calibration Report (optional)

Calibration Report

Inspection Certificate 3.1 according DIN EN 10204
including a calibration report is optional available

Click picture for more information

Ordering Example

To place an order Model with
tension
range
Code for
output signal

(if not
standard)

Code for
guide
rollers

(if not
standard)

Complete
Order No.

Please indicate the com-
plete order number.:

FSH-10K + A2 + R1 = FSH-10K-A2-R1

Delivery Includes

Tension sensor with transport packaging, operating instruction in german or english (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charge

Dimensions

Dimensions For PDF-file please
click picture

Specifications

Calibration:According to SCHMIDT factory procedure
Accuracy:1.5 % full scale and 1 digit % full scale or better
other calibration material 3 % full scale or better
Overload protection:100 % of tension range
Measuring principle:Strain gauge bridge
Measuring roller deflection:Max. 0.5 mm
Natural frequency:Approx. 500 Hz, depending on tension range
Signal processing:Analog
Temperature drift:Less than 0.05 % full scale/C
Output signal:Standard: 0 - 1 V DC (analog) impedance: ≥ 5 kΩ
Option: 0 - 10 V DC (analog)
Option: 4 - 20 mA DC (analog)
Damping (fg):Standard: 30 Hz (other values on request)
Temperature range:10 - 45 C
Air humidity:85 % RH, max.
Power supply:+15...24 V DC, max. 50 mA regulated
Housing material:Aluminium
Dimensions:See dimensions above
Weight, net (gross):Up to model FSH-2000 approx. 420 g (approx. 530 g)
model FSH-5000 and FSH-10K approx. 450 g (approx. 600 g)
model FSH-20K and higher tension ranges approx. 490 g (approx. 650 g)

Specifications subject to change without notice!

News

1209451075.jpg

New Tension Meter

1496124624.jpg

With one click you can download the information sheet for our new tension sensor.

Contact

Call us!

+49 (0)8638 9410-0
Can't find what you're looking for? Then get in touch with our experts.

Send us a fax!

+49 (0)8638 4825
You can also send us a fax with your message or request.

Contact via E-Mail!

info@hans-schmidt.com
Or feel free to email
us via our contact form!