Shore Durometer SHTA

Durometer according to Shore for determining the indentation hardness of soft rubber, elastomers, natural rubber, polyester, soft PVC, leather, etc.
Shore A hardness tester according DIN 53505, ISO 7619, ISO 868 and ASTM D 2240 

Compact durometer for fast measurements 

Special Features

  • Compact hardness tester for fast measurements
  • Measuring face 18 mm
measuring face durometer SHTA
  • Adjustable Min./Max. indicator marks to highlight the working range of the hardness tester
  • Optionally available: Calibration certificate with calibration report

Standard Features

  • Easy to use
  • High repeatability
  • Application range 10 - 90 Shore A units
  • Certificate of Compliance with the order 2.1 according EN 10204 is included

Operation

For measuring the hardness, place the durometer vertical and shock-free on the material to be measured and press the housing down, until the measuring face rests on the sample.
General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the testmaterial has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.
Operation hardness tester SHTA

Available Models

ModelShoreApplication
SHTAShore Asoft rubber, elastomers, natural rubber, soft PVC, leather, etc.
alternative
SHTDShore Dplastic and medium hard to hard rubber materialsmore

Attachments and Accessories

Memory pointer Code M

Memory pointer to capture and store value
(last or highest reading) during measuring.
Order code: e. g. SHTD-M

Click picture for more information
Control Ring 

To determine the displacement at 20 Shore
Order number: HP-P20

Click picture for more information

Control Rings

To determine the displacement at 20, 40, 60 and 80 Shore.
Includes a base disk as basis and an inspection certificate.
Order number: HP-P20-100

Click picture for more information

Calibration Certificate

Calibration certificate with calibration report is optional available.

Delivery Includes

scope of delivery hardness tester SHTA: Hardness tester with carrying case, Certificate of Com-
pliance with the order 2.1 according EN 10204 free of
charge, operating instructions in english or german as
requested

Dimensions

Dimensions For PDF-file please
click picture

Specifications

Indentor:
Cone 35,  1.25 mm
Depth of indentation:0 - 2.5 mm
Typical applications:Soft rubber, elastomers, natural rubber, soft PVC, leather, etc.
Accuracy: 1 hardness unit
Application range:10 - 90 Shore A
Standard:DIN 53505, ISO 7619, ISO 868, ASTM D 2240
Measuring spring force:0.55 - 8.065 N
Scale diameter:54 mm
Display range:0 - 100 Shore A units
Working face:18 mm
Housing diameter:24 mm
Weight, net (gross):Approx. 200 g (300 g)
Dimensions:28 x 58 x 110 mm (LxWxH)

Specifications subject to change without notice!

News

1209451075.jpg

New Tension Meter

1496124624.jpg

With one click you can download the information sheet for our new tension sensor.

Contact

Call us!

+49 (0)8638 9410-0
Can't find what you're looking for? Then get in touch with our experts.

Send us a fax!

+49 (0)8638 4825
You can also send us a fax with your message or request.

Contact via E-Mail!

info@hans-schmidt.com
Or feel free to email
us via our contact form!