Peeling Tester IPT200
Max. capacity 5 N, 20 N or 50 N
Test stand for measuring peeling force of SMD-packages, emboss tapes, adhesive films, stickers etc. with high sampling rate based on standard JIS C 0806-3 (1999)
Desktop-device with integrated load cell
Test stand with digital output signal for data processing with a PC
Test stand with digital output signal for data processing with a PC
Test Stand IPT200-5N
Model information
Print version
Special Features
top
- 2 operation modes:
real time - display the actual peeling strengh
peak force - to measure the peak force during a test - Test stand for clamping materials with a width from 8 - 88 mm
- Marks on the table help to clamp the samples central; sample width 8, 12, 16, 24, 32, 44, 56, 72 and 88 mm
- High sampling rate of 1000 times/sec
- Infinitely adjustable peeling angle 165 - 180 Grad
- 5 adjustable travel speeds: 120, 300, 500, 1000 und 1500 mm/min
- Adjustable setting screw to define stroke
- Well mounted carriage: Low mechanical vibration during measurements (0.1 % FS under condition of no attachment and load)
- Programmable high/low set-points for go/no-go testing:
with color-coded LED display: underrun (-NG) - good (OK) - exceeding (+NG)
- Output signal:
- USB for fast data transfer to a PC (1000 values/sec.)
- analog - Special software ZP Recorder-IPT for recording load curve and readings
Standard Features
- User switchable units: N, gf, and ozf
- Display udpdate time 10 times/sec
- Exact measuring with an accuracy of 0.2 %
- Test stand with easy to read LCD display
- »Zero Set« to zero the gauge (weight compensation for clamp)
- Overload stop function (150 % full scale) to decrease the damage of the sensor
- Immediately aborting the measurement by emergency switch
- Mains operation
Available Models
| Model | Capacity in N | Resolution | Capacity in gf | Capacity in ozf |
| IPT200-5N | 0 - 5 N | 0.001 N | 0 - 500.0 gf | 0 - 18.00 ozf |
| IPT200-20N | 0 - 20 N | 0.01 N | 0 - 2.000 kgf | 0 - 4.409 lbf |
| IPT200-50N | 0 - 50 N | 0.01 N | 0 - 5.000 kgf | 0 - 11.02 lbf |
Please note:
The test stand can be supplied with higher capacity on request.
The test stand can be supplied with higher capacity on request.
Standard Accessories
 | ZP-Recorder-IPT Software for data acquisition by USB output Click picture for more information |
Delivery Includes
Test stand with load cell, film fixture, software, USB cable and operating instruction in english
Specifications
| Capacity: | Max. 5 N, 20 N or 50 N |
| Resolution: | 0.001 N |
| Accuracy: | ±0.2 % Full Scale, ±1 digit |
| Sample width: | 8 - 88 mm |
| Travel speed: | 5 steps: 120, 300, 500, 1000, 1500 mm/min |
| Peeling angle: | 165 - 180 degree, infinetly adjustable (angle according to hight) |
| Feed: | 0 - 200 mm, mechanical adjustable set points with stop function |
| Measuring units: | N, gf, ozf (switchable) |
| Display: | 4-stellig, 14 mm high |
| Overload protect: | 150 % Full Scale, LED blinks and buzzer warns at 110 % |
| Memory: | Flash memory for max. 1000 values; recallable peak - tension |
| Setpoints: | Programmable Max/Min setpoints with color-coded indicators |
| Output signal: | USB and analog |
| Temperature range: | 5 - 40 °C |
| Air humidity: | 85 % RH, max. |
| Power supply: | 100 - 240 V AC |
| Dimensions: | 710 x 300 x 126 mm (LxBxH) |
| Weight, net (gross): | Approx. 11 kg |
Specifications subject to change without notice!
