Crimp Tester WTTM
Max. capacity 1000 N
Motorized wire pull tester for cable joints according to DIN, EN, BS, IEC, UL, SAE and MIL standards
Rugged desktop device with integrated force sensor
Crimp tester with 12 different slots for the prent wire strength
Crimp tester with 12 different slots for the prent wire strength
Test stand WTTM-50C
Model Information
Print version
Special Features
top
- Test stands for accurate determination of tensile strength of solder-free cable joints with end sleeves, pins, solder pins or similar components
- For cross sections from 0.05 mm² (AWG 30) to 10 mm² (AWG 8)
- Receptacle adapter with 12 different slots from 0.5 to 6.0 mm for the prent wire strength
- Easy operation
- Adjustable hull-off speed depending on standard (26, 37.5, 50, 100, 150, 200 und 250 mm/min
- Force measuring device with high accuracy and reproducibility of measurement results
- 2 selectable modes:
Peak mode - to capture the peak force achieved during a test (memory pointer) - torn of the cable joint
Real time - to display the actual tension force - Network-independent by integrated NiCD-batteries
- Rugged construction for high accuracy
- Usable for quality control in laboratories or manufacturing
Standard Features
- Max. load 1000 N
- RS 232 interface
- Main operation
- Test stands with integrated force gauge of series FGC and FGB
Available Models
| Model | Measuring Range | Resolution | Design |
| WTTM-50C | 0 - 500.0 N | 0.1 N | with RS 232 interface |
| WTTM-100C | 0 - 1000 N | 1 N | with RS 232 interface |
Standard Accessories
 | FMI-Connect Software for transfer and save data as Excel-file click picture for more information |
 | Connecting Cable For RS 232-C output for connecting the force gauge to a PC: Sub D9 female, cable length 3 m Order number: FGC-CC |
Delivery Includes
Specifications
| Measuring Range: | WTTM-50C: 0 - 500.0 N WTTM-100C: 0 - 1000 N |
| Resolution: | WTTM-50C: 0.1 N WTTM-100C: 1 N |
| Measuring principle: | Bidirectional force sensor with strain gauge |
| Accuracy: | ±0.5 % Full Scale ±1 digit |
| Application area: | IEC 60352-2: conductor cross section 0.05 - 10 mm², AWG 8 - 30, SAE AS7928II: AWG 12 - 28 |
| Cable strength: | Terminal adapter width: 0.5, 0.8, 1.0, 1.3, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0 mm clamping device: 0.1 - 6.0 mm (continuously variable) |
| Hull-off speed: | 25, 37.5, 50 (standard), 100, 150, 200, 250 mm/min |
| Force units: | N, kgf (gf), lbf (oz) |
| Display: | 4 digit LCD, 12 mm high Update time adjustable: 1000 ms, 500 ms, 333 ms (standard), 200 ms, 100 ms, 50 ms |
| Overload protection: | 200 % Full Scale, display flashes at 120 % Full Scale |
| Zero adjustment: | 10 % Full Scale |
| A/D converter: | 12 bit |
| Output signal: | RS 232 C (baud rate adjustable- 2.4 kB, 4.8 kB, 9.6 kB, 19.2 kB) |
| Temperature range: | 10 - 40 °C |
| Air humidity: | 80 % RH, max. |
| Power supply: | Mains adapter 100 - 240 V DC (50/60 Hz) with Euro plug |
| Housing material: | Aluminium anodized, surface tempered steel, stainless steel V2A |
| Housing Dimensions: | 350 x 160 x 110 mm (LxWxH) |
| Weight, net (gross): | Approx. 19 kg (Approx. 20 kg) |
Specifications subject to change without notice!
