Crimp Tester WTT
Max. capacity 500 N
Wire pull tester for cable joints according to DIN, EN, BS, IEC, UL, SAE and MIL standards
Rugged desktop device with integrated force sensor
Crimp tester with 12 different slots for the prent wire strength
Crimp tester with 12 different slots for the prent wire strength
Test stand WTT-50
Special Features
top
- Test stands for accurate determination of tensile strength of solder-free cable joints with end sleeves, pins, solder pins or similar components
- For cross sections from 0.05 mm² (AWG 30) to 10 mm² (AWG 8)
- Receptacle adapter with 12 different slots from 0.5 to 6.0 mm for the prent wire strength
- Release handle for easy operation
- 2 selectable modes:
Peak mode - to capture the peak force achieved during a test (memory pointer) - torn of the cable joint
Real time - to display the actual tension force - Network-independent by integrated NiCD-batteries
- Rugged construction for high accuracy
- Usable for quality control in laboratories or manufacturing
Standard Features
- Max. load 500 N
- Test stands with integrated force gauge of series FGC and FGB
- 2 different models with or without RS 232 output
Available Models
| Model | Measuring range | Resolution | Design |
| WTT-50B | 0 - 500.0 N | 0.1 N | without interface |
| WTT-50C | 0 - 500.0 N | 0.1 N | with RS 232 and analog output |
Standard Accessories
 | Connecting Cable For RS 232-C output for connecting the force gauge to a PC: Sub D9 female, cable length 3 m Order number: FGC-CC |
Accessories (optional)
 | FMI-Connect Software for transfer and save data as Excel-file click picture for more information |
 | Connecting Cable Order number: FGC-CA |
Delivery Includes
EN 10204, operating instructions in several languages;
additional for model WTT-50C: Connecting cable FGC-CC for RS 232
Specifications
| Measuring range: | 0 - 500.0 N |
| Measuring principle: | Bidirectional force sensor with strain gauge |
| Resolution: | 0.1 N |
| Stroke: | 0.5 mm |
| Accuracy: | ±0.2 % full scale ±1 digit |
| Application area: | IEC 60352-2: conductor cross section 0.05 - 10 mm², AWG 8...30, SAE AS7928II: AWG 12...28 |
| Cable strength: | Terminal adapter width: 0.5, 0.8, 1.0, 1.3, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0 mm clamping device: 0.1 - 6.0 mm (continuously variable) |
| Measuring units: | N, Kgf (gf), lb (oz) |
| Display: | 4 digit LCD, 12 mm high Update time adjustable: 1000 msec (standard), 500 msec, 333 msec, 200 msec, 100 msec, 50 msec |
| Overload: | 200 % full scale, display flashes at 120 % full scale |
| Zero adjustment: | 10 % full scale |
| A/D converter: | 12 bit |
| Output signal: | Only model WTT-50C and WTT-100C: RS 232 C (baud rate adjustable - 2.4 kB, 4.8 kB, 9.6 kB, 19.2 kB), analog ±1 V DC, Overload protection: open collector - NPN Transistor (DC 30 V, 5 mA) |
| Temperature range: | 5 - 40 °C |
| Air humidity: | 85 % RH, max. |
| Mounting hole for test stand: | 4 x M4, length 6 mm |
| Power supply: | Rechargeable NiCd batteries (approx. 12 h continuous use) and/or 230 V AC adapter |
| Housing material: | Anodised aluminium, surface temperated steel, stainless steel V2A |
| Housing dimensions: | 350 x 160 x 65 mm (LxWxH) |
| Weight, net (gross): | Approx. 14 kg (approx. 15 kg) |
Specifications subject to change without notice!
