Force Gauge ZTS

Capacity from 0 - 2 N up to 0 - 5000 N

Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency
High quality unit with interface (RS 232, USB, analog and Digimatic) and memory
This force measuring unit has a fast measuring frequency for exact acquisition of peak values


Force gauge with digital output signal for data processing with a PC

Special Features

  • 2 operation modes:
    real time - display the actual tension or compression force
    peak force - to measure the peak force during a test
  • Force measuring device with extremly high sampling rate of 2000 times/sec for fast acquisition of peak values
  • Display update time 10 times/sec
  • Easy to read display (OLED)
display force gage ZTS
  • The header and footer of the display can be customized, as well as switched on and off
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) - good (OK) - exceeding (+NG) and relais outputs
  • coloured LED`s force gauge ZTS
    • Storage of 1000 values, which can be recalled:
      - on the display
      - data transfer to a PC
      - for printing with report
    • Output signal:
      - RS 232 C for connecting to a PC
      - USB
      - analog 2 V DC
      - Mitutoyo Digimatic e. g. to print the readings on a printer
    • Display can be reversed for inverted use; e. g. on vertical test stand
    reversed display force gauge ZTS
    • Zero Set to zero the gauge in all operating positions
    • Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
    • Force gauge with user switchable units: N, kgf (gf) und lbf (ozf)
    • Selectable language (english, german, italian, french, spanish, chinese, japanese, korean)
    • Manufacturers inspection certificate is included

    Standard Features

    • Force measuring device for exact measuring with an accuracy of 0.2 % full scale
    • Approx. 200 % overload protection
    • For hand-held use or mounting on test stand
    • Ergonomically-designed, rugged die-cast aluminium housing
    • Non-slip rubber grip
    • Operates on rechargeable battery and/or AC adapter
    • Full set of accessories included

    Available Models

    ModelCapacity
    N
    ResolutionCapacity
    gf; kgf
    Capacity
    ozf; lbf
    ZTS-20 - 2.000 N0.001 N0-200.0 gf0 - 7.00 ozf
    ZTS-50 - 5.000 N0.001 N0 - 500.0 gf0 - 18.00 ozf
    ZTS-200 - 20.00 N0.01 N0 - 2.000 kgf0 - 4.400 lbf
    ZTS-500 - 50.00 N0.01 N0 - 5.000 kgf0 - 11.00 lbf
    ZTS-1000 - 100.0 N0.1 N0 - 10.00 kgf0 - 22.00 lbf
    ZTS-2000 - 200.0 N0.1 N0- 20.00 kgf0 - 44.00 lbf
    ZTS-5000 - 500.0 N0.1 N0 - 50.00 kgf0 - 110.0 lbf
    ZTS-10000 - 1000 N1 N0 - 100.0 kgf0 - 220.0 lbf
    ZTS-25000 - 2500 N1 N0 - 250.0 kgf0 - 560.0 lbf
    ZTS-50000 - 5000 N1 N0 - 500.0 kgf0 - 1100.0 lbf

    Standard Accessories

    ZT Logger

    USB cable approx. 1.5 m long, CD-ROM with USB-driver and software "ZT-Logger" for data transfer
    AC Adapter

    For 100 - 240 V AC
    Order number: ADW-6010
    Inspection Certificate

    Delivery includes a manufacturers inspection certificate free of charge

    Click picture for more information

    Standard Attachment up to 1000 N

    Small Hook

    Aluminium, M6, measuring range up to 100 N
    Order number: A-1

    Steel, M6, measuring range from 100 N to 500 N
    Order number: S-1

    Steel, M6, measuring range from 500 N to 1000 N
    Order number: SR-1

    Flat Tip

    Aluminium, M6, 13 mm, measuring range up to 100 N
    Order number: A-2

    Steel, M6, 16 mm, measuring range from 100 N to 1000 N
    Order number: S-2

    Conical Tip

    Aluminium, M6, 85, measuring range up to 100 N
    Order number: A-3

    Steel, M6, 85, measuring range from 100 to 1000 N
    Order number: S-3

    Chisel Tip

    Aluminium, M6, 85, measuring range up to 100 N
    Order number: A-4

    Steel, M6, 85, measuring range from 100 N to 1000 N
    Order number: S-4

    Notched Tip

    Aluminium, M6, 90, measuring range up to 100 N
    Order number: A-5

    Steel, M6, 90, measuring range from 100 N to 1000 N
    Order number: S-5

    Extension Shaft

    Aluminium, M6, 80 mm, measuring range up to 100 N
    Order number: A-6
    Steel, M6, 100 mm, measuring range from 100 N to 1000 N
    Order number: S-6

    Large Hook

    Aluminium, M6, measuring range up to 100 N
    Order number: A-7

    Steel, M6, measuring range from 100 N to 1000 N
    Order numbr: S-7

    Y-Hook

    Aluminium, M6, measuring range up to 100 N
    Order number: A-8

    Steel, M6, measuring range from 100 N to 1000 N
    Order number: S-8

    Standard Attachment 2500 N and 5000 N

    Small Hook

    Steel, M10
    Order number: B-1

    Click picture for more information

    Flat Tip

    Steel, M10, 23 mm
    Order number: B-2

    Click picture for more information

    Conical Tip

    Steel, M10, 85
    Order number: B-3

    Click picture for more information

    Chisel Tip

    Steel, M10, 85
    Order number: B-4

    Click picture for more information

    Notched Tip

    Steel, M10, 85
    Order number: B-5

    Click picture for more information

    Extension Shaft

    Steel, M10, 100 mm long
    Order number: B-6

    Click picture for more information

    Handle

    Steel, M10
    Order number: B-7

    Click picture for more information

    Mounting Screws

    4 pieces, steel, M10 x 1
    Order number: B-8

    Click picture for more information

    Accessories (optional)

    Force Recorder Light

    Software for data aquisition by USB output
    - Force-time graph
    - Force gauge function setting
    - Data storage as CSV file
    Order number: SW-21
    Force Recorder Standard

    Additional functions in comparision to Force Recorder Light:
    5 graphs at maximum can be displayed in a table
    Order number: SW-22
    Printer

    To print stored values using Mitutoyo Digimatic output.
    Order number: DP-1 VR

    Click picture for more information

    Paper Roll

    For Printer DP-1 VR, 1 Set = 5 pieces
    Order number: DP-P
    Handle

    For easy use the force gauge can be equipped with a handle. Therefore especially higher forces can be measured more easily.
    Order number: FOH-1

    Click picture for more information

    Clamping Tools

    Depending on the application we have a lot of clamping tools and clamps in our programm.

    For more information click here

    Connecting Cable

    For analog output, for connection to a line recorder.
    Length approx. 3 m
    Order number: CB-108
    Connecting Cable

    For RS 232 output with sub D 9 female, for connection to PC.
    Length approx. 3 m
    Order number: CB-208
    Connecting Cable

    For Mitutoyo Digimatic output, for connection to Mitutoyo printer DP-1 VR.
    Length approx. 3 m
    Order number: CB-308
    Connecting Cable

    for force gauge with test stand (Series MX) to stop feed at Fmax or overload (force control).
    Length approx. 1.5 m
    Order number: CB-508
    Connecting Cable

    for force gauge with test stand (Series MX2 and EMX) to stop feed at Fmax or overload (force control).
    Length approx. 1.5 m
    Order Number: CB-518
    Connecting Cable

    for force gauge with test stand (series MX2-FA) to enable force-displacement measurement.
    Length approx. 1.5 m
    Order number: CB-718
    Connecting Cable

    for force gauge with test stand (EMX-FA) to enable force-displacement measurement.
    Length approx. 1.5 m
    Order number: CB-728

    Connecting Cable

    with open ends (37-pin) for all available output signals to connect an unique device.
    Order number: CB-908
    Connecting Cable

    for trigger input (input signal from an external device e. g. electronic switch to stop the measurement)
    Order number: CB-808
    Accumulator

    Nickel metal hydride accumulator, 2-pole connector
    3.6 V, 1300 mAh
    Order number: DP-308

    Click picture for more information

    Calibration Certificate

    Calibration certificate with calibration report is optional available.

    Delivery Includes

    scope of delivery force gage ZTS: Force gauge with carrying case, standard attachment, AC adapter, USB connecting cable, 1 CD-ROM with USB-driver and simple software for data transfer, manufacturers inspection certificate, operating instruction in german or english (as requested)

    Dimensions

    Dimensions For PDF-file please
    click picture

    Specifications

    Measuring principle:Bidirectional force sensor with strain gauge
    Accuracy:0.2 % full scale 1 digit
    Measuring units:N, kgf (gf), lbf (ozf) selectable
    Display:OLED, 4 digit
    Sampling rate:2000 times/sec.
    Overload capacity:Approx. 200 % full scale,
    symbol flashes at 110 % full scale
    Plug gauge:Measuring range up to 1000 N: M6 male thread
    Measuring range 2500 N and 5000 N: M10 male thread
    Memory:Internal memory for max. 1000 values
    recallable peak - compression/tension
    Setpoints:Programmable Max/Min setpoint with color-coded indicators in the LED display
    Output signal setpoints:Open collector: +NG, OK, -NG, OVL (to stop feed at Fmax or overload)
    Output signal:RS 232 C (8, 1, N, 19200),
    analog 2 V DC,
    USB
    Digimatic
    Temperature range:0 - 40 C
    Air humidity:20 - 80 % RH, max.
    Power supply:Rechargeable NiMh batteries (approx. 8 h continuous use,
    approx. 8 h charging time) and/or 100...240 V AC adapter
    and two adapters (EU/USA)
    Housing material:Die-cast aluminium
    Dimensions:Measuring Range up to 1000 N: 191 x 75 x 34 mm (LxWxH)
    Measuring range 2500 N and 5000 N: 221 x 83 x 44.5 mm (LxWxH)
    Weight, net (gross):Measuring range up to 1000 N: approx. 490 g (approx. 1400 g)
    Measuring range 2500 N and 5000 N: approx. 1100 g (approx. 2100 g)

    Specifications subject to change without notice!

    News

    1209451075.jpg

    New Tension Meter

    1496124624.jpg

    With one click you can download the information sheet for our new tension sensor.

    Contact

    Call us!

    +49 (0)8638 9410-0
    Can't find what you're looking for? Then get in touch with our experts.

    Send us a fax!

    +49 (0)8638 4825
    You can also send us a fax with your message or request.

    Contact via E-Mail!

    info@hans-schmidt.com
    Or feel free to email
    us via our contact form!