Force Gauge ZTA

Capacity from 0 - 2 N up to 0 - 5000 N

Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency
High quality unit with interface (RS 232, USB, analog and Digimatic) and memory
This force measuring unit has a fast measuring frequency for exact acquisition of peak values


Force gauge with digital output signal for data processing with a PC

Special Features

  • 2 operation modes:
    real time - display the actual tension or compression force
    peak force - to measure the peak force during a test
  • Force measuring device with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
  • Display update time 10 times/sec
  • Easy to read display (OLED)
display force gage ZTA
  • The header and footer of the display can be customized, as well as switched on and off
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) - good (OK) - exceeding (+NG) and relais outputs
coloured LED`s force gauge ZTA
  • Storage of 1000 values, which can be recalled:
    - on the display
    - data transfer to a PC
    - for printing with report
  • Output signal:
    - RS 232 C for connecting to a PC
    - USB
    - analog 2 V DC
    - Mitutoyo Digimatic e. g. to print the readings on a printer
  • Display can be reversed for inverted use; e. g. on vertical test stand
reversed display force gauge ZTA
  • Zero Set to zero the gauge in all operating positions
  • Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
  • Force gauge with user switchable units: N, kgf (gf) und lbf (ozf)
  • Selectable language (english, german, italian, french, spanish, chinese, japanese, korean)
  • Manufacturers inspection certificate is included

Special features in comparison to standard unit ZTS


  • In combination with a test stand with linear scale, force-displacement measurements are possible.
  • Readings can be transfered from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
  • 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording 
  • Indication of two peak values per measurement.

Standard Features

  • Force measuring device for exact measuring with an accuracy of 0.2 % full scale
  • Approx. 200 % overload protection
  • For hand-held use or mounting on test stand
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Non-slip rubber grip
  • Operates on rechargeable battery and/or AC adapter
  • Full set of accessories included

Available Models

ModelCapacity
N
ResolutionCapacity
gf; kgf
Capacity
ozf; lbf
ZTA-20 - 2.000 N0.001 N0-200.0 gf0 - 7.00 ozf
ZTA-50 - 5.000 N0.001 N0 - 500.0 gf0 - 18.00 ozf
ZTA-200 - 20.00 N0.01 N0 - 2.000 kgf0 - 4.400 lbf
ZTA-500 - 50.00 N0.01 N0 - 5.000 kgf0 - 11.00 lbf
ZTA-1000 - 100.0 N0.1 N0 - 10.00 kgf0 - 22.00 lbf
ZTA-2000 - 200.0 N0.1 N0- 20.00 kgf0 - 44.00 lbf
ZTA-5000 - 500.0 N0.1 N0 - 50.00 kgf0 - 110.0 lbf
ZTA-10000 - 1000 N1 N0 - 100.0 kgf0 - 220.0 lbf
ZTA-25000 - 2500 N1 N0 - 250.0 kgf0 - 560.0 lbf
ZTA-50000 - 5000 N1 N0 - 500.0 kgf0 - 1100.0 lbf

Standard Accessories

ZT Logger

USB cable approx. 1.5 m long, CD-ROM with USB-driver and software "ZT-Logger" for data transfer
AC Adapter

For 100 - 240 V AC
Order number: ADW-6010
Inspection Certificate

Delivery includes a manufacturers inspection certificate free of charge

Click picture for more information

Standard Attachment up to 1000 N

Small Hook

Aluminium, M6, measuring range up to 100 N
Order number: A-1

Steel, M6, measuring range from 100 N to 500 N
Order number: S-1

Steel, M6, measuring range from 500 N to 1000 N
Order number: SR-1

Flat Tip

Aluminium, M6, 13 mm, measuring range up to 100 N
Order number: A-2

Steel, M6, 16 mm, measuring range from 100 N to 1000 N
Order number: S-2

Conical Tip

Aluminium, M6, 85, measuring range up to 100 N
Order number: A-3

Steel, M6, 85, measuring range from 100 to 1000 N
Order number: S-3

Chisel Tip

Aluminium, M6, 85, measuring range up to 100 N
Order number: A-4

Steel, M6, 85, measuring range from 100 N to 1000 N
Order number: S-4

Notched Tip

Aluminium, M6, 90, measuring range up to 100 N
Order number: A-5

Steel, M6, 90, measuring range from 100 N to 1000 N
Order number: S-5

Extension Shaft

Aluminium, M6, 80 mm, measuring range up to 100 N
Order number: A-6
Steel, M6, 100 mm, measuring range from 100 N to 1000 N
Order number: S-6

Large Hook

Aluminium, M6, measuring range up to 100 N
Order number: A-7

Steel, M6, measuring range from 100 N to 1000 N
Order numbr: S-7

Y-Hook

Aluminium, M6, measuring range up to 100 N
Order number: A-8

Steel, M6, measuring range from 100 N to 1000 N
Order number: S-8

Standard Attachment 2500 N and 5000 N

Small Hook

Steel, M10
Order number: B-1

Click picture for more information

Flat Tip

Steel, M10, 23 mm
Order number: B-2

Click picture for more information

Conical Tip

Steel, M10, 85
Order number: B-3

Click picture for more information

Chisel Tip

Steel, M10, 85
Order number: B-4

Click picture for more information

Notched Tip

Steel, M10, 85
Order number: B-5

Click picture for more information

Extension Shaft

Steel, M10, 100 mm long
Order number: B-6

Click picture for more information

Handle

Steel, M10
Order number: B-7

Click picture for more information

Mounting Screws

4 pieces, steel, M10 x 1
Order number: B-8

Click picture for more information

Accessories (optional)

Force Recorder Light

Software for data aquisition by USB output
- Force-time graph
- Force gauge function setting
- Data storage as CSV file
Order number: SW-21
Force Recorder Standard

Additional functions in comparision to Force Recorder Light:
5 graphs at maximum can be displayed in a table
Order number: SW-22
Force Recorder Professional

Additional function in comparision to Force Recorder Light
- 5 graphs at maximum can be displayed i a table
- Force-displacement graphing (possible only in combination with a test stand with linear
   scale)
Order number: SW-23
Printer

To print stored values using Mitutoyo Digimatic output.
Order number: DP-1 VR

Click picture for more information

Paper Roll

For Printer DP-1 VR, 1 Set = 5 pieces
Order number: DP-P
Handle

For easy use the force gauge can be equipped with a handle. Therefore especially higher forces can be measured more easily.
Order number: FOH-1

Click picture for more information

Clamping Tools

Depending on the application we have a lot of clamping tools and clamps in our programm.

For more information click here

Connecting Cable

For analog output, for connection to a line recorder.
Length approx. 3 m
Order number: CB-108
Connecting Cable

For RS 232 output with sub D 9 female, for connection to PC.
Length approx. 3 m
Order number: CB-208
Connecting Cable

For Mitutoyo Digimatic output, for connection to Mitutoyo printer DP-1 VR.
Length approx. 3 m
Order number: CB-308
Connecting Cable

for force gauge with test stand (Series MX) to stop feed at Fmax or overload (force control).
Length approx. 1.5 m
Order number: CB-508
Connecting Cable

for force gauge with test stand (Series MX2 and EMX) to stop feed at Fmax or overload (force control).
Length approx. 1.5 m
Order Number: CB-518
Connecting Cable

for force gauge with test stand (series MX2-FA) to enable force-displacement measurement.
Length approx. 1.5 m
Order number: CB-718
Connecting Cable

for force gauge with test stand (EMX-FA) to enable force-displacement measurement.
Length approx. 1.5 m
Order number: CB-728

Connecting Cable

with open ends (37-pin) for all available output signals to connect an unique device.
Order number: CB-908
Connecting Cable

for trigger input (input signal from an external device e. g. electronic switch to stop the measurement)
Order number: CB-808
Accumulator

Nickel metal hydride accumulator, 2-pole connector
3.6 V, 1300 mAh
Order number: DP-308

Click picture for more information

Calibration Certificate

Calibration certificate with calibration report is optional available.

Delivery Includes

scope of delivery force gage ZTA: Force gauge with carrying case, standard attachment, AC adapter, USB connecting cable USB adapter, 1 CD-ROM with USB-driver and simple software for data transfer, manufacturers inspection certificate, operating instruction in german or english (as requested)

Dimensions

Dimensions For PDF-file please
click picture

Specifications

Measuring principle:Bidirectional force sensor with strain gauge
Accuracy:0.2 % full scale 1 digit
Measuring units:N, kgf (gf), lbf (ozf) selectable
Display:OLED, 4 digit
Sampling rate:2000 times/sec.
Overload capacity:Approx. 200 % full scale,
symbol flashes at 110 % full scale
Plug gauge:Measuring range up to 1000 N: M6 male thread
Measuring range 2500 N and 5000 N: M10 male thread
Memory:Internal memory for max. 1000 values
recallable peak - compression/tension
Setpoints:Programmable Max/Min setpoint with color-coded indicators in the LED display
Output signal setpoints:Open collector: +NG, OK, -NG, OVL (to stop feed at Fmax or overload)
Output signal:RS 232 C (8, 1, N, 19200),
analog 2 V DC,
USB
Digimatic
Temperature range:0 - 40 C
Air humidity:20 - 80 % RH, max.
Power supply:Rechargeable NiMh batteries (approx. 8 h continuous use,
approx. 8 h charging time) and/or 100...240 V AC adapter
and two adapters (EU/USA)
Housing material:Die-cast aluminium
Dimensions:Measuring Range up to 1000 N: 191 x 75 x 34 mm (LxWxH)
Measuring range 2500 N and 5000 N: 221 x 83 x 44.5 mm
Weight, net (gross):Measuring range up to 1000 N: approx. 490 g (approx. 1400 g)
Measuring range 2500 N and 5000 N: approx. 1100 g (approx. 2100 g)

Additional functions in comparison to standard unit ZTS
Force-displacement measurement:In combination with a test stand with linear scale force-displacement measurements are possible
Memory:Readings can be transfered from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
High low output:2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
Extended peak mode:Indication of two peak values per measurement

Specifications subject to change without notice!

News

1209451075.jpg

New Tension Meter

1496124624.jpg

With one click you can download the information sheet for our new tension sensor.

Contact

Call us!

+49 (0)8638 9410-0
Can't find what you're looking for? Then get in touch with our experts.

Send us a fax!

+49 (0)8638 4825
You can also send us a fax with your message or request.

Contact via E-Mail!

info@hans-schmidt.com
Or feel free to email
us via our contact form!