Force Gauge ZP
Capacity from 0 - 2 N up to 0 - 1000 N
This device has a fast measuring frequency for exact acquisition of peak values
Up to 1000 readings/s can be acquired and transfered via USB interface for data processing to a PC
Force gauge ZP
Special Features
top
- 2 operation modes:
real time - display the actual tension or compression force
peak force - to measure the peak force during a test - With USB interface for fast data transfer of 1000 measurements/sec to a PC
- High sampling rate of 1000 times/sec for fast acquisition of peak values
- Display update time 10 times/sec
- User switchable units: N, gf (kgf) und ozf (lbf)
- Storage of 1000 values, which can be recalled:
- on the display
- data transfer to a PC - Output signal:
- RS 232 C for connecting to a PC
- analog ±2 V DC
- USB for fast data transfer to a PC - Programmable high/low set-points for go/no-go testing:
with color-coded LED display: underrun (-NG) - good (OK) - exceeding (+NG) and relais outputs
- Alarm indication in display and output signal in case of overload for series MX
- »Zero Set« to zero the gauge in all operating positions
- Manufacturers calibration report is included
- Display can be reversed for inverted use; e. g. on vertical test stand
Standard Features
- Exact measuring with an accuracy of 0.2 %
- 200 % overload protection
- Easy to read LCD display
- For hand-held use or mounting on test stand (mounting threads 4 x M4 in the back)
- Ergonomically-designed, rugged die-cast aluminium housing
- Non-slip rubber grip
- Operates on rechargeable battery and/or AC adapter
- Full set of accessories included
Available Models
| Model | Capacity N | Resolution | Capacity gf; kgf | Capacity ozf; lbf |
| ZP-2 | 0 - 2.000 N | 0.001 N | 0-200.0 gf | 0 - 7.00 ozf |
| ZP-5 | 0 - 5.000 N | 0.001 N | 0 - 500.0 gf | 0 - 18.00 ozf |
| ZP-20 | 0 - 20.00 N | 0.01 N | 0 - 2.000 kgf | 0 - 4.400 lbf |
| ZP-50 | 0 - 50.00 N | 0.01 N | 0 - 5.000 kgf | 0 - 11.00 lbf |
| ZP-100 | 0 - 100.0 N | 0.1 N | 0 - 10.00 kgf | 0 - 22.00 lbf |
| ZP-200 | 0 - 200.0 N | 0.1 N | 0- 20.00 kgf | 0 - 44.00 lbf |
| ZP-500 | 0 - 500.0 N | 0.1 N | 0 - 50.00 kgf | 0 - 110.0 lbf |
| ZP-1000 | 0 - 1000 N | 1 N | 0 - 100.0 kgf | 0 - 220.0 lbf |
Standard Accessories
 | Small Hook Aluminium, M6, measuring range up to 100 N Steel, M6, measuring range from 100 N to 500 N Steel, M6, measuring range from 500 N to 1000 N |
 | Flat Tip Aluminium, M6, Ø 13 mm, measuring range up to 100 N Steel, M6, Ø 16 mm, measuring range from 100 N to 1000 N |
 | Conical Tip Aluminium, M6, 85°, measuring range up to 100 N Steel, M6, 85°, measuring range from 100 to 1000 N |
 | Chisel Tip Aluminium, M6, 85°, measuring range up to 100 N Steel, M6, 85°, measuring range from 100 N to 1000 N |
 | Notched Tip Aluminium, M6, 90°, measuring range up to 100 N Steel, M6, 90°, measuring range from 100 N to 1000 N |
 | Extension Shaft Aluminium, M6, 80 mm, measuring range up to 100 N |
 | Large Hook Aluminium, M6, measuring range up to 100 N Steel, M6, measuring range from 100 N to 1000 N |
 | Y-Hook Aluminium, M6, measuring range up to 100 N Steel, M6, measuring range from 100 N to 1000 N |
 | Connecting Cable, CD-ROM USB cable 1,5 m long, CD-ROM with USB-driver and software "ZP-Logger" for data transfer |
 | AC Adapter For 230 V AC Order number: AD-230 |
 | Inspection Certificate Delivery includes a manufacturers inspection certificate free of charge Click picture for more information |
Accessories (optional)
 | ZP Recorder Software for data acquisition by USB output Click picture for more information |
 | Handle For easy use the force gauge can be equipped with a handle. Therefore especially higher forces can be measured more easily. Click picture for more information |
 | Clamping Tools Depending on the application we have a lot of clamping tools and clamps in our programm. |
 | Connecting Cable For analog output, for connection to a line recorder, length 3 m Order number: CB-104 |
 | Connecting Cable For RS 232 output with sub D 9 female, for connection to PC, length 3 m Order number: CB-204 |
 | Connecting Cable for force gauge with test stand (Series MX) to stop feed at Fmax or overload (force control). Order number: CB-501 |
 | Connecting Cable for force gauge with test stand (Series MX) to stop feed at Fmax or overload (force control) and output signal RS 232. Order number: CB-504 |
 | Connecting Cable for force gauge with test stand (Series EMX and MX2) to stop feed at Fmax or overload (force control) Order number: CB-704 |
 | Calibration Certificate Calibration certificate with calibration report is optional available. |
Delivery Includes
 | Force gauge with carrying case, standard accessories, AC adapter, USB connecting cable, 1 CD-ROM with USB-driver and simple software for data transfer, manufacturers calibration report, operating instruction in german or english as requested |
Specifications
| Measuring principle: | Bidirectionaler force sensor with strain gauge |
| Displacement: | 0.2 mm |
| Accuracy: | ±0.2 % full scale ±1 digit |
| Measuring units: | N, gf (kgf), ozf (lbf) selectable |
| Display: | 4 digit, 14 mm high |
| Overload capacity: | 200 % full scale, symbol flashes at 110 % full scale |
| Plug gauge: | M6 male thread |
| Zero adjustment: | 10 % full scale |
| A/D converter: | 24 bit |
| Memory: | Flash memory for max. 1000 values recallable peak - compression/tension |
| Setpoints: | Programmable Max/Min setpoint with color-coded indicators in the LED display |
| Output signal setpoints: | Open collector: +NG, OK, -NG, OVL; max. 30 V DC, 10 mA |
| Output signal: | RS 232 C (8, 1, N, 19200), analog ±2 V DC, USB |
| Temperature range: | 5 - 45 °C |
| Air humidity: | 85 % RH, max. |
| Low battery indicator: | Display flashes |
| Power supply: | Rechargeable NiMh batteries (approx. 8 h continuous use, approx. 10 h charging time) and/or 230 V AC adapter |
| Mounting threads for test stand: | 4 x M4, Depth 5 mm |
| Housing material: | Die-cast aluminium |
| Dimensions: | 220 x 78 x 32 mm (LxWxH) |
| Weight, net (gross): | Approx. 540 g (1400 g) |
Specifications subject to change without notice!
