Door Tester Unit ZTS-RDM-2000N

Measuring range 0 - 2000 N

Digital force gauge for determination of closing forces of automatic doors according DIN EN 12445, DIN EN 12650 and JISA4721
High quality force measuring unit with interface (RS 232, analog and USB and memory).
This device has a fast measuring frequency for exact acquisition of peak values.

Force gauge with seperate remote load sensor

Special Features

  • 2 operation modes:
    real time - display the actual tension or compression force
    peak force - to measure the peak force during a test
  • Force measuring device with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
  • Display update time 10 times/sec
  • Easy to read display (OLED)
display force gage ZTS-RDM-2000N
  • The header and footer of the display can be customized, as well as switched on and off
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) - good (OK) - exceeding (+NG) and relais outputs
  • LED`s force gauge ZTS-RDM-2000N
    • Storage of 1000 values, which can be recalled:
      - on the display
      - data transfer to a PC
      - for printing with report
    • Output signal:
      - RS 232 C for connecting to a PC
      - USB
      - analog 2 V DC
      - Mitutoyo Digimatic e. g. to print the readings on a printer
    • Display can be reversed for inverted use; e. g. on vertical test stand
    reversed display force gauge ZTS-RDM-2000N
    • Zero Set to zero the gauge in all operating positions
    • With separate remote load sensor
    • Force gauge with user switchable units: N, kgf (gf) und lbf (ozf)
    • Selectable language (english, german, italian, french, spanish, chinese, japanese, korean)
    • Manufacturers inspection certificate is included

    Standard Features

    • Easy to change extension shaft
    • Force measuring device for exact measuring with an accuracy of 0.2 %
    • 200 % overload protection
    • Ergonomically-designed, rugged die-cast aluminium housing
    • Non-slip rubber grip
    • Operates on rechargeable battery and/or AC adapter

    Available Models

    ModelMeasuring RangeDescription
    ZTS-RDM-2000N0 - 2000 NIndicator, load cell, extension shafts,
    spacer handle and Software
    ZTS-DM-2000N0 - 2000 NIndicator and load cell

    The accuracy of the load cell can only be assured, by using with the force gauge, the load cell ist adjusted for.

    Standard Accessories

    Load Cell

    according to DIN EN 12445, DIN EN 12650 and JIS A4721
    Order number: DM-2000N

    Click picture for more information

    ZT Logger

    USB cable approx. 1.5 m long, CD-ROM with USB-driver and software "ZT-Logger" for data transfer
    AC Adapter

    For 100 - 240 V AC
    Order number: ADW-6010
    Inspection Certificate

    Delivery includes a manufacturers inspection certificate free of charge

    Click picture for more information

    Additional Standard Accessories ZTS-RDM-2000N

    Force Recorder Standard

    Additional functions in comparision to Force Recorder Light:
    5 graphs at maximum can be displayed in a table
    Order number: SW-22
    Extension Shaft

    For measuring forces at different positions of the closing operation.
    Order number: DM-ETM-200 - 200 mm
    Order number: DM-ETM-300 - 300 mm
    Order number: DM-ETM-500 - 500 mm

    Click picture for more information

    Spacer Handle

    for easy positioning the load cell during measuring with the extension shaft
    Order number: DM-ETM-001

    Click picture for more information

    Accessories (optional)

    Connecting Cable

    For analog output, for connection to a line recorder.
    Length approx. 3 m
    Order number: CB-108
    Connecting Cable

    For RS 232 output with sub D 9 female, for connection to PC.
    Length approx. 3 m
    Order number: CB-208

    Nickel metal hydride accumulator, 2-pole connector
    3.6 V, 1300 mAh
    Order number: DP-308

    Click picture for more information

    Calibration Certificate

    Calibration certificate with calibration report is optional available.

    Delivery Includes

    Indicator with carrying case and separate force sensor, AC adapter, USB connecting cable, CD-ROM with USB-driver, simple software for data transfer, manufacturer`s calibration report, operating instruction in english.

    Additional for model ZTS-RDM-2000N
    Software Force Recorder Standard, 3 extension shafts (200, 300, 500 mm) and spacer handle


    Dimensions For PDF-file please
    click picture


    Measuring range:2000 N
    Measuring principle:Bidirectional force sensor with strain gauge
    Displacement:max. 5 mm, 500 N per mm, 1 digit
    Extension shift:200, 300 and 500 mm
    Sampling rate:2000 times/s
    Accuracy:2 % full scale 1 digit
    A/D converter:24 bit
    Measuring units:N, gf (kgf), ozf (lbf) selectable
    Display:4 digit, 14 mm high
    Overload capacity:200 % full scale,
    symbol flashes at 110 % full scale
    Zero adjustment:10 % full scale
    Memory:Flash memory of max. 1000 values
    recallable peak - tension/compression force
    Setpoints:Programmable Max/Min setpoints with color-coded indicators in the LED display
    Output signal:RS 232 C (8, 1, N, 19200),
    analog 2 V DC,
    Temperature range:5 - 45 C
    Air humidity:85 % RH, max.
    Low battery indicator:Display flashes
    Power supply:Rechargeable NiMh batteries (approx. 8 h continuous use,
    approx. 8 h charging time) and/or 230 V AC adapter
    Mounting threads
    for test stand:
    4 x M4, Depth 5 mm
    Housing material:Indicator: Die-cast aluminium
    Load cell: Hardened aluminium
    Dimensions:Indicator: 191 x 75 x 34 mm (LxWxH)
    Load cell: 380 x 94 x 66 (LxBxH)
    Weight, net (gross):Indicator: approx. 490 g (1380 g)
    Load cell: 1200 g (1400 g)

    Specifications subject to change without notice!



    New Tension Meter


    With one click you can download the information sheet for our new tension sensor.


    Call us!

    +49 (0)8638 9410-0
    Can't find what you're looking for? Then get in touch with our experts.

    Send us a fax!

    +49 (0)8638 4825
    You can also send us a fax with your message or request.

    Contact via E-Mail!
    Or feel free to email
    us via our contact form!